jeiroq
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jeiroq
-
-
8 minutes ago, aptalca said:
?? You didn't mention you already made changes to enable reverse proxy. That requires a whole another set of troubleshooting methods.
Https is not a valid option for validation. Check the docs
I guess my noobness is showing. I hadn't realized I did this? Sorry for the confusion.
-
40 minutes ago, aptalca said:
With letsencrypt, you're trying the https address, right?
Log suggests nginx is started and there are no errors.
What happens when you try to connect?
If I go to https://requests.mydomain.com or http:// I get a refused connection/this site can't be reached. Now if I use https://192.168.1.10:1443 I get "your connection to this site isn't secure" due to not being able to validate certificate. So, this is progress! If I select to continue, I can then get "welcome to our server".
I guess a follow up here would also be how to be able to type in "requests.mydomain.com" and get https automatically? First need to figure out the certificate issue though.
Edit: made 2 changes in the container settings. Validation was changed from http to https, and AppData config path was changed from appdata/letsencrypt/config to just appdata/letsencrypt/ - I can now access ombi through https://requests.mydomain.com - now I need to find how to force https now so it doesn't have to be manually typed in.
Thank you for your patience and great wealth of knowledge, it's much appreciated.
-
4 hours ago, aptalca said:
Post a log
Here's the log from letsencrypt.
I did install the nginx container by itself with same ports and it is up and running. I am able to get to "Welcome to our server" page using same ports and by using my domain. The problem seems to be with letsencrypt not starting up nginx?
-
9 hours ago, aptalca said:
Do "docker ps" and post the line containing letsencrypt
Honestly, I'm having a similar issue on a fresh install using Google Domains as well.
I can't get nginx to show the "welcome" page to show the container working. I've been banging my head for the past day on this. I have also tried just using 192.168.1.10:180 (local IP) to no avail here.
root@Apollo:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES aed87507ede6 linuxserver/letsencrypt "/init" 25 minutes ago Up 2 minutes 0.0.0.0:180->80/tcp, 0.0.0.0:1443->443/tcp letsencryptMy log shows "Server ready" and that certificate exists, however nothing passes through. My port forwards are set up correctly (EdgeRouter, port 80, going to server IP > 180, port 443 going to server IP > 1443) which matches docker ps for the ports. I edited email and domain names for screenshot of container settings.
I have checked that my site is pointing to my correct public address by changing to other containers ports with port forward (port 80, going to server IP > 3579 (Ombi)) and a few others as well, and these were all successful.
Any ideas?
-
Also, what version of unRAID are you using? I thought the message had changed to 'unmountable' in the latest beta release.
I'm running 6.0-beta12.
Sorry for the late response, I haven't been home enough to work on the server. What would the appropriate recovery tools be? Will I need to take out the drives, mount new ones, and copy data over? What's the best route to go here?
-
I was thinking XFS, sorry about the confusion there.
I've got a scary situation going on now, I have the 2 new drives in (upgraded to 4TB for the 2 failing drives) and I ran pre-clear and did the whole bit on creating a new parity drive and then once that was complete, the 3TB data drive died. After I put in the new drive to replace the data drive it rebuilt it using parity (which I hope is correct, but all I have to go from now) and worked smoothly.
Now that I've completed that, parity is valid, and in Main > Array Devices I see that the drive has reiserfs, yet shows Unformatted under "Free", checking out Array Operation it shows this drive under Unformatted disk present. What's going on here? I had to start the array in order to perform the Data Rebuild, now I can't stop the array and take it off-line, if I check the box and select Stop, the page refreshes with is ready to do it again.
Just noticed another something interesting, when checking the Array Devices, for the other disks, it's showing 0B Used and 0B Free. Dang, and my shares aren't showing up. I think I just lost everything..
-
Hey all, I've been having an issue with my unRAID setup with painfully slow loading times trying to load it up from a fresh boot, or even several days just to get to the login screen. I can ping and SSH into the server without any hickup and this seems to be only affecting the GUI aspect. It's also slow moving from Dashboard to Main or any other tab grouping. It seems to take about 10 minutes or more to click on something. I found another thread where it was recommended to disable constant updating, even after that (which took about 45 minutes to complete) it is still super slow. Has anyone else seen this, or is this just an issue I'm having?
I didn't have any of these issues in the past on some of the earlier 6.0 betas. Would an update help here as well? I can't even replace drives, which is really needed.
6.0-beta12
unRAID - dom0 (only VM running currently)
2GB allocated from 16GB (~.5GB used)
2 vCPUs allocated (from 8-core AMD CPU)
Intel Gigabit NIC
default /syslinux/menu.c32 menu title Lime Technology prompt 0 timeout 50 label unRAID OS kernel /bzimage append initrd=/bzroot label unRAID OS Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot unraidsafemode label Memtest86+ kernel /memtest label Xen/unRAID OS menu default kernel /syslinux/mboot.c32 append /xen xsave=1 cpufreq=xen:performance dom0_mem=2048M dom0_max_vcpus=2 dom0_vcpus_pin iommu=1 --- /bzimage console=tty0 xen-pciback.hide=(01:00.0)(01:00.1) --- /bzroot label Xen/unRAID OS Safe Mode (no plugins) kernel /syslinux/mboot.c32 append /xen --- /bzimage --- /bzroot unraidsafemode
-
... got off "early" (6pm) to get the RMA done today, but Seagate closed at 5pm CST for their warranty department ...
You can do the RMA entirely online -- no need for a phone call and it works 24/7
http://www.seagate.com/support/warranty-and-replacements/
Thanks, I called them yesterday morning and moved forward on the RMA for the drives. I purchased a couple 4TB drives for replacements, and am in the process of making a 4TB drive my parity drive. After that is complete, I will work on formatting the other one as ZFS and copying data from the failing drive over to it before sending off to RMA land. When the "new" replacement drives come in I will start transferring data over and upgrade to ZFS using the method in the sticky.
-
How are the problem drives connected? If it is to a daughter board rather than the motherboard you might want to check the board is properly seated.
These are connected directly to the mobo.
ST3000DM001 - those are the drives BackBlaze has nearly 50% annual failure rate with.
Don't waste your time, just get those drives swapped with something that isn't crap as soon as you can.
Unfortuantely, I didn't know about how bad Seagate was when I bought these drives a couple years ago, they were known to be a decent model then
I don't have the funds to replace 6 HDD's right now, but may have to start phasing them out. I wish this issue would've come up sooner when I could've RMA'd one at a time and get new stock in without losing anything, then sell the old drives. I swapped SATA cables out today on sdf and sdg then performed short SMART tests on them.
sdg passes with 0 reallocated sectors, 0 pending and 0 offline_uncorrectable.
sdf.. has 4328 reallocated sectors, 4992 pending and 4992 offline_uncorrectable.
sdd won't show the values now - "Read SMART Data failed: Input/output error"
I've had to work long hours recently, and got off "early" (6pm) to get the RMA done today, but Seagate closed at 5pm CST for their warranty department
I'm at a loss as to what to do now. Seeing the BackBlaze data was surprising for those Seagate drives, I work at a rather large tech company's data center, and now know not to buy Seagates, but.. those are still some stupid high numbers. I'll call Seagate first thing in the morning and see if I can get an RMA set up. I'll buy a few couple 4TB drives (suggestions at a decent price point and availability?) and try to move data over before shipping out dying drives.
When putting in the new (4TB) drives, would ZFS be recommended over RFS?
-
Reseated SATA cables, there were a couple that didn't feel solid when unseating/reseating on the mobo. I'm ordering new cables to rule that out in the future. The drives were then seen and SMART status looks good along with short self-test for affected drives.
I started a parity-check and after about 5 minutes I got the bad email again
sdf and sdg aren't seen again. I then saw under the main page that there were "946304" errors on both these drives for a grand total of 1,892,608. I'm shutting down the server until the new cables come in.sdg popped up as being found, then gone again about a minute later. I will dance some SATA cables around and see if the problem follows without mounting the drives.
While you are at it, you might want to clear out and dust and check the fans are OK.There was a very fine layer of dust (below normal levels, I clean the filters often), and my drives never go above 32C (only go this high when parity check in progress) All fans are working great.
-
Haha, somehow I missed that one.. maybe I should've mentioned I was beta-testing some new drives
So, when stopping the array I was alerted "Too many wrong and/or missing disks!"
No device is showing for Parity0 and Disk3, this is a little worrisome since they are both showing in a fault state under the dashboard as well. I'm shutting it down now and will be checking all the cabling then starting it back up to see if they're found then
-
I feel like I'm starting to feel a little of the age of my array (which isn't all that old - 2 years). I am seeing multiple errors, which I've never had before on any of these drives. Parity drive has 976, then 2 separate data drives, one with 113 and the other with 492. I literally have until March 11th to RMA them if I need to go that route, but can't be without all 3 at the same time, and don't particularly want to go purchase 3 new drives either
Things to note:
- These drives are part of a 5 disk array + parity + cache drive (7 total)
- sdg, sdd, and sdf are affected
- sdf and sdg do not show Temp (just a *)
- About a month ago I put in new CPU/mobo/RAM and upgraded to 6
- The last parity check was performed 03-04-2015 with 0 errors and averaged 71.7 MB/sec
Smart logs:
# cat smart-sdf-03082015.txt
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: /6:0:0:0 Product: User Capacity: 600,332,565,813,390,450 bytes [600 PB] Logical block size: 774843950 bytes scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# cat smart-sdg-03082015.txt
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: /6:0:1:0 Product: User Capacity: 600,332,565,813,390,450 bytes [600 PB] Logical block size: 774843950 bytes Physical block size: 1549687900 bytes Lowest aligned LBA: 14896 scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# cat smart-sdd-03082015.txt
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: Z1F2269Z LU WWN Device Id: 5 000c50 04f673cfa Firmware Version: CC24 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Mar 8 23:19:37 2015 CDT ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 334) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 107 079 006 Pre-fail Always - 129433296 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6155 5 Reallocated_Sector_Ct 0x0033 085 085 010 Pre-fail Always - 19592 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 9662636 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16784 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2467 183 Runtime_Bad_Block 0x0032 061 061 000 Old_age Always - 39 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 9 9 11 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 070 058 045 Old_age Always - 30 (Min/Max 21/35) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2439 193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 28902 194 Temperature_Celsius 0x0022 030 042 000 Old_age Always - 30 (0 14 0 0 0) 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 168 198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 168 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 179 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1481h+36m+09.376s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9092801864 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 210336716809 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 16675 hours (694 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 07:03:05.956 READ DMA EXT 25 00 00 ff ff ff ef 00 07:03:04.851 READ DMA EXT 25 00 00 ff ff ff ef 00 07:03:04.738 READ DMA EXT 25 00 00 ff ff ff ef 00 07:03:04.702 READ DMA EXT 25 00 00 ff ff ff ef 00 07:03:04.648 READ DMA EXT Error 1 occurred at disk power-on lifetime: 16675 hours (694 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 07:01:47.102 READ DMA EXT 25 00 00 ff ff ff ef 00 07:01:47.057 READ DMA EXT 25 00 00 ff ff ff ef 00 07:01:46.728 READ DMA EXT 25 00 00 ff ff ff ef 00 07:01:46.447 READ DMA EXT 25 00 00 ff ff ff ef 00 07:01:45.946 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9630 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I just received this error:
unRAID Disk 3 SMART message: 08-03-2015 23:36
Notice: Disk 3 passed SMART health check
ST3000DM001-1CH166_Z1F1X5AR (sdf)
And immediately after that:
unRAID Disk 3 SMART failure: 08-03-2015 23:37
Alert: Disk 3 failed SMART health check
ST3000DM001-1CH166_Z1F1X5AR (sdf)
Which way should I jump? I don't want to lose any data, but I also don't want to pay extra for more drives. I don't have any red balls, and this was literally found tonight thanks to my server emailing me
- These drives are part of a 5 disk array + parity + cache drive (7 total)
-
You are a life-saver! I really appreciate the time you spent writing this up. Since this is Mac related, can you tell me if it is possible to hide one TM backup share from another Mac? I have TM1 and TM2, one being mine, the other being my wife's. I don't really want her to see my backup if she is browsing the server just so she only sees things that pertain to her and her MBP.
AFP doesn't have hidden shares. You can make the share private.
Thanks for the information.
-
I had the same problem with 3TB drives, looks like you're running 4TB drives? I had the same issue and found that 4.7 doesn't allow anything larger than 2TB.
-
Thank you! I figured it was something simple. Things are sometimes too simple. I appreciate your help!
-
I'm sure this is possible, and I am very new to unRAID, but I am tech savvy so that almost makes up for it. I don't want to be able to see disk1, disk2, flash, etc.. when viewing my Tower from My Network Places on my Windows Machines. Is there a way to turn the visibility of these off while in SMB, but still be able to connect to the server (mainly through my Mac) and view the individual disks? I have AFP running on 5.0rc11, and I like the clean look of only seeing my shares in there, and would like that in my Windows machines too. I know that with shares you can chose on export security for SMB to be hidden.
Thanks.
-
You are a life-saver! I really appreciate the time you spent writing this up. Since this is Mac related, can you tell me if it is possible to hide one TM backup share from another Mac? I have TM1 and TM2, one being mine, the other being my wife's. I don't really want her to see my backup if she is browsing the server just so she only sees things that pertain to her and her MBP.
I don't have the funds to replace 6 HDD's right now, but may have to start phasing them out. I wish this issue would've come up sooner when I could've RMA'd one at a time and get new stock in without losing anything, then sell the old drives. 
I'm at a loss as to what to do now. Seeing the BackBlaze data was surprising for those Seagate drives, I work at a rather large tech company's data center, and now know not to buy Seagates, but.. those are still some stupid high numbers. 
sdf and sdg aren't seen again. I then saw under the main page that there were "946304" errors on both these drives for a grand total of 1,892,608. I'm shutting down the server until the new cables come in.
[Support] Linuxserver.io - SWAG - Secure Web Application Gateway (Nginx/PHP/Certbot/Fail2ban)
in Docker Containers
Posted
I'm definitely no expert on this, but it seems that you don't have your domain pointing to the correct IP address (your public IP) and/or port forwarding isn't setup correctly to send ports 80 and 443 to your servers private IP and ports for letsencrypt you set up.
Are you using dynamic DNS or do you have a static public IP address?