Paloma Macetko

Hello I installed Minio on my Unraid, pointing to: /mnt/user/s3/ It worked normally for a few hours, but then Unraid started to bug completely, showing some errors in the terminal, which I couldn't identify. After I removed Minio, everything went back to normal. From what I saw, Minio is no longer compatible with Unraid. Is there an alternative for an S3 server that is compatible with Unraid?

Hello If only the Onboard card is active, everything works perfectly. I also tested via: 192.168.30.1 But it didn't work either.

Hi Jorge I don't have access to the server right now. But a question came to mind: could there be a problem with the network card that could affect the entire network?

Hello everyone I have a strange problem. I have a network cable connected to the onboard network card, with the following settings: - IP: 192.168.20.200 - Gateway: 192.168.20.1 - Netmaps: /24 It's working perfectly. However, I'm trying to install a 10 GB network card (Intel X540-t2), and when I install it, and go to configure it, I configure it (on port 1) to: - IP: 10.0.0.10 - Gateway: [I left it empty] - Netmaks: /24 And on port 2 I configured it to: - IP: 11.0.0.10 - Gateway: [I left it empty] - Netmaks: /24 However, when I restart Unraid, the Onboard network simply stops working, where Unraid has no connection to the network.

Hey guys I have a VM with Ubuntu installed, however, I am receiving the alert below when this vm receives more than 10mb/s of traffic. How do I remove this limit? Message: May 19 12:14:30 Hogsmeade vnstatd[323]: Traffic rate for "vnet2" higher than set maximum 10 Mbit (30s->40894464, r133721 t42970819, 64bit:1), syncing.