vali

Hi, I actually found the root cause of my problem. After switching from an intel system to a new machine I left the boot options the same and one of them was causing the sleep problem. I found that when I started UNRAID in safe mode sleep was working fine so I started adding things one by one until I finally figured out exactly which piece was causing the problem. I recommend you try the same. Good luck.

Hi, I have been using Unraid for a while now for NAS and I also use it as my gaming machine with VM and GPU passthrough. I just upgraded my machine and I've been trying to get everything working with the new hardware. The Unraid version and hardware I am using is: Unraid Version: 6.11.2 CPU: AMD Ryzen 5800X Motherboard: ASUS X570 Gaming Plus Memory: 2x32GB 3600 DDR4 GPU: EVGA 3080TI The only issue I've been having troubles with is the system always hangs when I try to put it to sleep or when it tries to go to sleep automatically. It sounds like it turns off everything but the power never goes off. I also get a print that it goes to S3 state (should be visible in the syslog attached), afterwards I just get a screen with the horizontal line at the top left and the screen never shuts off. The problem occurs every single time the system tries to go to sleep, even right after a reboot with the array, docker, and VMs off. I have tried various things most of which haven't made a difference, I will list some of them here as well as the results I've seen. Set Power Supply Idle Control to typical current idle: System hangs. Disabled C States: System hangs. Tried older Unraid version 6.8.0: Goes to sleep with no problem! Tried older Unraid version 6.9.2: System hangs. Tried running Unraid 6.11.2 in safe mode with GUI (no plugins): Goes to sleep with no problem! Tried uninstalling the sleep app: System hangs. (In safe mode and after uninstalling the sleep app I used the command "echo mem > /sys/power/state" to invoke sleep state.) I attached my diagnostic, as well as a persistent log across multiple reboots while trying to debug the problem. If anyone can help me get to the bottom of this I'd greatly appreciate it. Thanks in advance! syslog.zip tower-diagnostics-20221107-1949.zip