jrhop

Should I power down the server first or just stop all dockers & vms before doing so?

Is there a procedure to replace the parity drive when there are no open sata ports?

@JorgeB Here is the SMART report for the parity drive and the complete system diagnostics. unraid-diagnostics-20230829-1714.zip unraid-smart-20230829-1713.zip

I do show on the dashboard that the parity status is: Parity Parity is valid Last check completed on Tuesday, 2023-08-15, 21:12 (fourteen days ago) Duration: 11 hours, 29 minutes, 24 seconds. Average speed: 193.4 MB/s Finding 0 errors Next check scheduled on Thursday, 2023-08-31, 23:30 Due in: 2 days, 12 hours, 10 minutes

I am getting some confusing SMART results on my parity drive and I am guessing I just need to replace it. The SMART self-test shows: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 32282 - # 2 Short offline Completed without error 00% 18158 - But when I look at the SMART error log I see Error 676 occurred at disk power-on lifetime: 32556 hours (1356 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 90 ff ff ff 4f 00 15d+13:36:58.952 READ FPDMA QUEUED 60 00 30 ff ff ff 4f 00 15d+13:36:58.951 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15d+13:36:58.951 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15d+13:36:58.951 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15d+13:36:58.950 READ FPDMA QUEUED I have purchased a replacement drive but I don't have any open SATA ports. Can I just pull the current drive and put the new one in and have it rebuild the parity drive?