tomek232

Thanks for the answer

SMART Self-test Log Structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6149 - # 2 Short offline Completed without error 00% 5 - # 3 Short offline Completed without error 00% 3 - # 4 Short offline Completed without error 00% 1 -

Hi, The software shows me that the disk health is bad. With the attribute 187 Reported_Uncorrect it shows me "Bad". Should I be worried? Regards smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.0-0.bpo.4-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SK hynix SATA SSDs Device Model: SK hynix SH920 mSATA 128GB Serial Number: EI47N026110207K5N Firmware Version: 1010BL00 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 27 09:59:46 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4) seconds. Offline data collection capabilities: (0x19) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 8) minutes. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 5 Retired_Block_Count -O--CK 253 253 036 - 0 9 Power_On_Hours -O--CK 094 094 000 - 6148 12 Power_Cycle_Count -O--CK 100 100 020 - 2450 100 Total_Erase_Count -O--CK 100 100 000 - 7767199 171 Program_Fail_Count -O--CK 253 253 000 - 0 172 Erase_Fail_Count -O--CK 253 253 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 249 175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 177 Wear_Leveling_Count -O--CK 100 100 000 - 7674144 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 14 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 50 180 Erase_Fail_Count -O--CK 100 100 000 - 2446 181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 183 SATA_Downshift_Count -O--CK 253 253 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 79 188 Command_Timeout -O--CK 253 253 000 - 0 191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0 194 Temperature_Celsius -O---- 046 000 000 - 46 (Min/Max 11/58) 195 Hardware_ECC_Recovered -O--CK 099 099 000 - 301685941 201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 204 Soft_ECC_Correction -OSR-- 100 100 --- - 0 231 SSD_Life_Left PO--CK 253 253 --- - 1 234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 29674 241 Total_Writes_GB -O--CK 100 100 --- - 10422 242 Total_Reads_GB -O--CK 100 100 --- - 11364 250 Read_Retry_Count -O--CK 100 100 --- - 5221 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 4 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 16435 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 16435 [14] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 a0 a0 00:00:32.560 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 a0 a0 00:00:32.560 NOP [Abort queued commands] 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:23.350 READ DMA EXT Error 16434 [13] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 22 00 00 00 2b 08 80 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 1d 00 00 00 2b 08 63 e0 e0 00:00:23.350 READ DMA EXT Error 16433 [12] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 22 00 00 00 2b 08 80 e0 e0 00:00:23.350 READ DMA EXT 25 00 00 00 1d 00 00 00 2b 08 63 e0 e0 00:00:23.350 READ DMA EXT Error 16432 [11] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 50 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 e0 e0 00:00:14.590 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 e0 e0 00:00:14.590 NOP [Abort queued commands] 25 00 00 00 69 00 00 00 00 00 02 e0 e0 00:00:14.590 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 01 e0 e0 00:00:14.590 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 e0 e0 00:00:14.590 READ DMA EXT Error 16431 [10] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- Error 16430 [9] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 a0 a0 00:00:34.290 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 a0 a0 00:00:34.290 NOP [Abort queued commands] 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:25.020 READ DMA EXT Error 16429 [8] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 22 00 00 00 2b 08 80 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 1d 00 00 00 2b 08 63 e0 e0 00:00:25.010 READ DMA EXT Error 16428 [7] occurred at disk power-on lifetime: 6148 hours (256 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 1f 00 00 00 2b 08 e1 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 21 00 00 00 2b 08 c0 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 1e 00 00 00 2b 08 a2 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 22 00 00 00 2b 08 80 e0 e0 00:00:25.020 READ DMA EXT 25 00 00 00 1d 00 00 00 2b 08 63 e0 e0 00:00:25.010 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5 - # 2 Short offline Completed without error 00% 3 - # 3 Short offline Completed without error 00% 1 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (empty) == 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (empty) == 0x07 ===== = = === == Solid State Device Statistics (empty) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET