exxis
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by exxis
-
-
On my share in question I've cache set to yes, the cache is nearly full (with 1,56 TB on it) unraid says mover is running (schedule is set to hourly) however, since 8 hours, I see no files moved. A problem which comes with this as it seems, I can't copy any new files to the unraid server as the transfer rate is below 5 MB/s (usually 100-130 MB/s). I don't know if this has to do with the cache being full and the cache writing to the array, but I see no progress whatsoever.
So I've krusader and the disks and cache mounted, what would be the correct procedure to move files from the cache to the array?
EDIT: a little something form me to understand, does the mover cut and paste or does it copy the files to the array, if so, for example it copys the files, with that I would see no change on the cache (in regards to the used and free space) till it's done copying the files and clearing the cache?
EDIT2: Just checked the read/write speeds, it's reading between 1 MB/s and 4,6 MB/s and is writing to one disk of the array between 1 MB/s and 5 MB/s why is this so slow?
-
can't seem to get it work, the graphics card isn't even listed in the xml file, so nothing to add there, also having a hard time finding a bios and don't know to edit it.
-
did the steps however didn't work without a vbios selected I get following error
internal error: Unknown PCI header type '127' for device '0000:0c:00.0'So it doesn't even boot
-
I've already restarted the server after that, which of course solved the problem. However does a full diagnostics bring any results or only when the error appears again?
-
Today when I signed in in the dashboard I didn't see any disk and in general the dashboard didn't work I got the following error
"unraid Fatal error: Allowed memory size of 134217728 bytes exhausted"
I've attached the log. What happened here and how do I fix it and prevent this from happening again.
-
I will add them to the array after formating.
Regarding the rebuild. Since it's my first time, with that I didn't lose any files right? Couldn't check right now, the rebuild is complete what wonders me is that the space is evenly allocated from both disks in the array.
-
-
Hi everyone,
so last week I've build my first unraid server in a Silverstone RM43-320-RS, with a LSI SAS9305-24i. Currently I've a 20TB drive as a parity drive and two new 18 TB drive, which I've already filled with data from my old Synology NAS. So far everything work pretty well and I'm already amazed with unraid.
Today everything from my NAS was finished copying over. So I've shut it down and put the disks in my unraid server. The first thing I've noted that from the 4 disks only the 2x 4 TB disks where recognized and not the other two 10 TB drives. So I thought I reboot the server.
The thing is I wanted to stop the array first, however I couldn't nothing happend. So then I restarted the unraid server from the dashboard as I've read that the array will be stopped nontheless.
After the unraid server was back up I saw that the second 18 TB disk said "DEVICE IS DISABLED, CONTENTS EMULATED". So I've checked in the forums that this means the disk has to be rebuild, which I've already started.
My question now is, why did this happen? Is there a log I could check. Normally this should not happen after a restart of the server after adding some disk (just adding them to the server, not assigned yet)
greetings
exxis
Propblem with cache moving files to the array
in General Support
Posted
Here they are
unraid-diagnostics-20230420-1839.zip