Tinker3436

Thanks will try that out!

Since updating to the newest version (6.12.8 to 6.12.10 to 6.12.8) my server started crashing every few hours. emre-diagnostics-20240409-2337.zip

Thanks a lot, I just started the rebuild process!

So the drive is fine, it could be just the cables (and I should swap/replace them if it happens again?) How can I rebuild on top? I saw posts talking about errors in this process, so I don't want to mess it up.

Sorry for the late reply. Here are the diagnostics after starting the array: emre-diagnostics-20230306-1831.zip

note that this was after a fresh boot emre-diagnostics-20230306-0040.zip

Hello I got the following error for my drive: Device disabled, content emulated. I took down the array as soon as I saw the notification and also replugged the drive. I got the following smart report, should I replace the drive? Or what should I do? smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.17-Unraid] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 2.5 5400 Device Model: ST4000LM024-2AN17V Serial Number: WCK0GXWN LU WWN Device Id: 5 000c50 0a8d60fef Firmware Version: 0001 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5526 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5417 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Mar 5 23:20:12 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 659) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 081 057 006 Pre-fail Always - 116526507 3 Spin_Up_Time 0x0003 100 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 084 084 020 Old_age Always - 16726 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 090 060 045 Pre-fail Always - 1006958201 9 Power_On_Hours 0x0032 046 046 000 Old_age Always - 47971 (145 73 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 406 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 091 000 Old_age Always - 51540787383 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 074 045 040 Old_age Always - 26 (Min/Max 26/27) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 095 093 000 Old_age Always - 11479 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1129061 194 Temperature_Celsius 0x0022 026 055 000 Old_age Always - 26 (0 18 0 0 0) 195 Hardware_ECC_Recovered 0x001a 081 064 000 Old_age Always - 116526507 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 14001 (195 45 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 75618607774 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 385126352083 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.