gadget069

I'm having issues with not being abel to create another VPN. I wanted to add another for a docker connection. I have a WG3 I cannot access/edit/delete. I am unable to add any new VPNs. The wg3 is empty. Is there a way to manually delete this?

I'm having a wierd docker issue. When trying to start and app, I have started getting a "server error" when trying to start the app. I went to the docker tab and saw the the app had not started, the docker page kepr reloading, the app trying to start the container ID kept changing. until I did a hard refresh on the webpage, then I can start them without issue. I've had other odd issues with web broiwsers passing through open vpn not working anymore. Not sure why all of a sudden I'm having issues. I'm on 6.12.4. docker.mp4 tortuga-diagnostics-20240103-1121.zip

Sorry my bad. too many things going at one time, thanks

Here is a snapshot of the log file

I just noticed I had these. Not sure how long they have been sitting out there. Can I delete these?

Having issues with OpenVPN. It has worked flawlessly until this evening. Chromium has stopped working properly. I'm now getting this error. If I run the browser outside of OpenVPN it works fine [custom-init] No custom files found, skipping... [ls.io-init] done. Obt-Message: Xinerama extension is not present on the server 2023-12-30 19:07:02,212 [INFO] websocket 0: got client connection from 127.0.0.1 2023-12-30 19:07:02,217 [PRIO] Connections: accepted: @192.168.1.137_1703984822.212248::websocket 2023-12-30 19:08:46,400 [PRIO] Connections: closed: @192.168.1.137_1703984822.212248::websocket (Clean disconnection)

There was an ip address change detected by duckdns. I restarted duckdns and proxy manager. I've literally havent changed anything since I first got it up and running.

I believe there was a recent update that I took. I started getting emails that some of my certs were going to expire. I did not take care of them right away. I've tried a few time to update them throught the dashboard and they fail. I'm a complete newb at this stuff.

I noticed on my docker tabe at the bottom a bunch of orphaned images of dockers that are active. I havent changed anything other than updating the apps. If I remove them will they mess with the matching running docker?

Question. I see the urbackup app is telling me there is an update when I signed in. But going to my docker tab, I'm not showing any updates available. How do you go about manually updating?

I'm getting this error, for fortunatley it's just the icon, broken link I guess. Webmail-Lite-PHP: Could not download icon https://raw.githubusercontent.com/SmartPhoneLover/unraid-docker-templates/main/templates/icons/webmail-lite-files_200x200.png

It stopped finding new errors finally. It must have sorted itself out finally. Been running smooth since yesterday afternoon

I've run a scrub 3 times, each time finding errors.

I used Windows to update the drives firmware but am sticking with the EVO 850. I'm still running into errors tortuga-diagnostics-20230720-1257.zip

I'll have to give that a look. I had another spare EVO 850, So I did a swap and see what happens

The CT500MX is a Cricial drive. I've changed just about every cable, still having issues. My hardware swap was from a 5600g/MSI b450 to a 5950x/MSI b550. My case is a Silverstone CS380. If you have suggestions for good sata cables, that would be appreciated.

I switched cables again this morning. I do have a sata card in an x16 slot, I wonder if that is casuing issues. But the cache drives are not on that card.

I swapped out some cables, no my dockers service will not start and my VM disappeared.....ugh. I'll get a new diagnostic file in a sec. Edit, when enabling the docker service I get this error tortuga-diagnostics-20230720-0845.zip

I updated my cpu/mobo last night. Now I'm having issues with one of my chache drives causing problems. I did change out some sata cables from ones I purchased off Amazon, they were giving me issues. tortuga-diagnostics-20230720-0701.zip

This happens when using the gui, not xml editor. I can copy the xml to notepad, delete the VM(not image), recreate the VM with the saved xml code and it works fine. Why I'm asking is I've been putting off a motherboard/cpu swap. I'm sure the iommu goups will change.

I'm going to be swapping out the motherboard and CPU. But am running into an issue with my Windows 10 VM not allowing me to change any settings. I keep getting an xml error. I de-selected my iommu groups. Windows 107e632758-8ba8-6d1a-2476-fdf6e8304f5d16777216167772164/machinehvm/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd/etc/libvirt/qemu/nvram/7e632758-8ba8-6d1a-2476-fdf6e8304f5d_VARS-pure-efi.fddestroyrestartrestart/usr/local/sbin/qemuvdisk1+0:+100+0:+100 Sent from my SM-S918U1 using Tapatalk

I still cannot get this to work. Anything I change kicks out this VM creation error.

Will do, thanks

Log attached I'm still seeing this on the second drive root@Tortuga:~# btrfs dev stats /mnt/cache [/dev/sdc1].write_io_errs 0 [/dev/sdc1].read_io_errs 0 [/dev/sdc1].flush_io_errs 0 [/dev/sdc1].corruption_errs 0 [/dev/sdc1].generation_errs 0 [/dev/sdh1].write_io_errs 0 [/dev/sdh1].read_io_errs 0 [/dev/sdh1].flush_io_errs 0 [/dev/sdh1].corruption_errs 86297 [/dev/sdh1].generation_errs 5446 root@Tortuga:~# tortuga-diagnostics-20230703-1148.zip

I did not. But am seeing this in the log just now Jul 3 09:00:46 Tortuga kernel: BTRFS warning (device sdc1): checksum verify failed on 524376424448 wanted 0xb6800818 found 0xf660d968 level 1 Jul 3 09:00:46 Tortuga kernel: repair_io_failure: 166 callbacks suppressed Jul 3 09:00:46 Tortuga kernel: BTRFS info (device sdc1): read error corrected: ino 0 off 524376424448 (dev /dev/sdc1 sector 29999776) Jul 3 09:00:46 Tortuga kernel: BTRFS info (device sdc1): read error corrected: ino 0 off 524376428544 (dev /dev/sdc1 sector 29999784) Jul 3 09:00:46 Tortuga kernel: BTRFS info (device sdc1): read error corrected: ino 0 off 524376432640 (dev /dev/sdc1 sector 29999792) Jul 3 09:00:46 Tortuga kernel: BTRFS info (device sdc1): read error corrected: ino 0 off 524376436736 (dev /dev/sdc1 sector 29999800) Cache pool settings