gecl
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by gecl
-
-
Is there any way to use an Nvidia GPU? When I select Hardware/ H.265 NVENC 1080p its just my CPU doing the tasking.
Thanks
-
Is it possible to use the GPU to do the transcoding in Handbrake and MKVToolNix? For example in Handbrake when i select the Hardware H.265 NEVC 1080p option my CPU does the work, while the GPU sits idle. IDK if i need to change a prefrence in the GUI or if its through the docker edit function.
Thanks
-
Whenever I try to boot unraid with Nvidia 3050 plugged in using a riser cable it won't even get to the bios page, it doesn't do anything. when I turn it off and pull power to the GPU it starts up just fine. It is a Gigabyte B550I motherboard running bios FCb using AMD Ryzen 7 5700G with Radeon Graphics as CPU. I have the Nvidia and the GPU statistics plugin installed. Nvidia Driver Version: 550.67. If I boot the system and then plug the GPU in I get the error reading "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running"
Thanks
-
Ive tried to update two different dockers (Jellyfin, MKVtoolnix) and they wont update. The link says updates available but when i click to update it will say The command finished successfully! but "TOTAL DATA PULLED: 0 B" and update didn't go through
-
changed MTU back to 1500 and installed RTL8125 driver finally able to complete 12.6 update.
-
its an realtek r8125 card, im doing the driver
-
-
Having the same issue updated to 6.12.6 from 6.11.5 and hangs at
Triggering udev events: /sbin/udevadm trigger --action=changefor about 20 minutes before i turned it off and rolled it to the backup i made right before the update. Unraid starts no problem. Tried to redo the update and same result, it gets stuck at Triggering udev events I tried booting the usb in different ports but it never wnt anywhere.
Any suggestions?
-
I've tried to update to 6.12.6 from 6.11.5 a few times and it always and hangs at
Triggering udev events: /sbin/udevadm trigger --action=changefor about 20 minutes before i turned it off and rolled it to the backup i made right before the update. Unraid starts no problem. Tried to redo the update and same result, it gets stuck at Triggering udev events I tried booting the usb in different ports but it never went anywhere.
Any suggestions?
-
I havent been able to download any new dockers or run updates on the ones i already have. On updates it'll say complete but on data pulled says 0 bytes. When downlaoding new dockers I get unable to find image.
[Support] Djoss - MKVToolNix
in Docker Containers
Posted
Is there any way to use a GPU to do the transcoding to take the load off the CPU?