Glenadel

I have appdata stored on the array. Would it be as simply as copying it over to the cache drive?

I'm on Unraid 7.14 and my cache drive failed. I replaced it and ended up with no dockers at all. After re-installing via previous apps all my docker containers are installed and running. But when i go into any of it they are all empty as if i just installed them fresh. How do i get everything back to where it was before the cache drive failed? patchwork-diagnostics-20250627-2242.zip

OK got it fixed. DHCP turned on worked. When DHCP was still on i pinged port 10.1.1.222 and nothing, So no other device was using it. I went pretty deep into my router settings and noticed that the IP 10.1.1.222 was bound to the old NIS's Mac address. so with any other NIC it wouldn't work. was able to clear it out. Now everything is up and running again. Thank for your help!

Yeah when I first booted it up after the incident DHCP grabbed an IP that I had to look up. That’s when I noticed it couldn’t connect. I switched it back to the original static hopping it would resolve the problem. When I get home later today I’ll test it connected directly to the router with DHCP on and see if anything changes. Thank you for your help! Sent from my iPhone using Tapatalk

Here you go. Also i just added a TP-Link 2.5G NIC to my Server. no changes with the internet access on the server. patchwork-diagnostics-20240122-0605.zip

Yes i bypassed my switch when i first started testing.

Sorry forgot to post i used DNS 8.8.8.8 and 8.8.4.4 before deleting the network file or anything else.

patchwork-diagnostics-20240121-1627.zip

My PCIe X1 NIC died on my server. I switched to my onboard NIC and now my server cant reach out to the internet. I can ping my server just fine. I can access UnRaid(6.12.6) from the webui without issue. When i try and ping or traceroute in the terminal on unraid the terminal window closes out after freezing for around 15-20 seconds. When i try and load new apps it gives me an error (Download of appfeed failed.) I deleted the /boot/config/network.cfg file, rebooted, then changed the static back to the correct IP, then rebooted again, it still has the same issue. I also rebooted my router with no changes. Also i have the Archer AX3000 Pro and the unraid server no longer shows in my client list even though i can ping it from my main PC (that is hardwired), and my phone that's on wi-fi. Here are the contents of my network.cfg file. (i run pi-hole that's why my first DNS is 10.1.1.208) What can i do to get this resolved? # Generated settings: IFNAME[0]="br0" BONDNAME[0]="bond0" BONDING_MIIMON[0]="100" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" DESCRIPTION[0]="1Ghz" BONDING_MODE[0]="1" BONDNICS[0]="eth0" BRNICS[0]="bond0" PROTOCOL[0]="ipv4" USE_DHCP[0]="no" IPADDR[0]="10.1.1.222" NETMASK[0]="255.255.255.0" GATEWAY[0]="10.1.1.1" DNS_SERVER1="10.1.1.208" DNS_SERVER2="8.8.8.8" USE_DHCP6[0]="yes" DHCP6_KEEPRESOLV="no" SYSNICS="1"