Hugs11

Hey, I'm using my VPN with Gluetun for some docker container network with the Extra Parameters: --network=container:GluetunVPN Up until recently, the containers using GlutunVPN network would restart automatically after Gluetun container update or restart. I am not sure when it stopped working and didn't find information about this function in the documentation. Any idea why it stop working (maybe some new option with the v7) ?

The 2 hard drive part i want to replace are in raid 0 without parity They are only on the cache pool for now. So i can just remove the old HDD install the new one, go on the main tab, create a new array with the new disk and set the existing cache pool without formating it and i should keep everything? (sry if its sound dumb questions, but i'm not familiar yet with Unraid behavior and i'm not an it expert!) Thx again for the support

Hey there, I am currently switching to Unraid from a NAS Synology. I wanted to experiment Unraid first and get familiar with it before shutting down my Synology and transfer my HDD's to my new Unraid NAS My current Unraid array is the following : 1 array of 2 old HDD(no parity) (in xfs) and using an 2 To Nvme as cache Everything thing is set to go on the cache at the moment (appdata / domainssaved / system / personal share) Can i replace the 2 old HDD from my Unraid server with 2 HDD from my NAS synology without loosing every settings, dockers and virtual machine i have set up in Unraid ? can i avoid re-doing everything from scratch ? Thx

Thx, I’ve picked up a 2 to nvme to use as cache (and appdata if Unraid let me do both) It’s still a bit unclear to find the best way to use HDD pool and a SSD as cache for long-term seeding and hardlink, I guess I need to put my hands in unraid first to figure it out.

Hey guys, I'm finally leaving Synology and after many video tutorials, I have chosen Unraid for my next setup (waiting for my odroid H4+ with 32gb ram stick to be delivered atm) and was hoping to get some advice to finish up my setup. My use will be the following : - Rtorrent / rutorrent - .*arr (sonarr / radarr / prowlarr ) - Jellyfin - Photo collection & management ( Immich or Photoprism) I have always have work without redundancy and i'll keep it that way (all my sensible data will be backup to an external cloud) I already have 4x4 TO WD digital red plus HDD (so i guess ill make a 16to pool without parity) Thats leaves me with 1 x eMMC (Embedded Multimedia-Card) Socket and 1 x M.2 PCI Express Module to finish my setup. Here are the different scenarios I'm considering - 4TO SSD Nvme to use as cache (since I have 4x4to HDD) - 512 giga Nvme SSD to install the appdata and docker and work without cache? - Use a 4TO Nvme SSD as cache and use the eMMC to install appdata and docker containers ? Voila, let me know what you think would be the best for my configuration. Thx