Winogronko

I checked everything once more, and it turns out I didn’t connect the power to the cables from the HBA... 🥲 (it has cables with two SATA connectors and one power connector) Thanks!

Hello, I just bought a used LSI card. The seller told me it was already in IT Mode. After I installed the card and connected one drive for a test, the disk is not detected in Unraid. Card is detected in lspci: 01:00.0 SCSI storage controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) System logs show errors Dec 7 16:48:17 Blackgate kernel: pci 0000:01:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit] Dec 7 16:48:17 Blackgate kernel: pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit] Result from dmesg | grep -i "mpt2sas”: [ 8.745005] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (14231952 kB) [ 8.799304] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 8.799444] mpt2sas_cm0: MSI-X vectors supported: 1 [ 8.799630] mpt2sas_cm0: 0 1 1 [ 8.799864] mpt2sas_cm0: High IOPs queues : disabled [ 8.799958] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 71 [ 8.800053] mpt2sas_cm0: iomem(0x00000000d04c0000), mapped(0x000000006ee01c7c), size(16384) [ 8.800175] mpt2sas_cm0: ioport(0x000000000000f000), size(256) [ 8.855228] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 8.855359] mpt2sas_cm0: sending message unit reset !! [ 8.856969] mpt2sas_cm0: message unit reset: SUCCESS [ 8.884801] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15) [ 8.884998] mpt2sas_cm0: request pool(0x000000001a1f40c2) - dma(0x105200000): depth(3492), frame_size(128), pool_size(436 kB) [ 8.908230] mpt2sas_cm0: sense pool(0x0000000059ded5cf) - dma(0x104980000): depth(3367), element_size(96), pool_size (315 kB) [ 8.908473] mpt2sas_cm0: reply pool(0x00000000d9c91169) - dma(0x104a00000): depth(3556), frame_size(128), pool_size(444 kB) [ 8.908643] mpt2sas_cm0: config page(0x00000000e487029e) - dma(0x10494c000): size(512) [ 8.908769] mpt2sas_cm0: Allocated physical memory: size(7579 kB) [ 8.908886] mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432) [ 8.909022] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 8.953880] mpt2sas_cm0: overriding NVDATA EEDPTagMode setting [ 8.954505] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.02.00) [ 8.954657] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 8.958003] mpt2sas_cm0: sending port enable !! [ 11.575095] mpt2sas_cm0: hba_port entry: 000000004d728939, port: 255 is added to hba_port list [ 11.578036] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5003005702278430), phys(8) [ 16.703249] mpt2sas_cm0: port enable: SUCCESS What else can I try to get the drives detected? Thanks for help blackgate-diagnostics-20241207-1720.zip