sig28

@JorgeB Do I did 1. a full MemTest86 with no error 2. change the OS flash Stick from the USB port in the front of the computer to a usb directly on the motherboard on the back. 3. some changes in the Bios like deactivated everything I don’t need. 4. run on a single memory bar without any error for more than 24 hours. 5. run with the other memory bar with error within the first 5 hours. Some error appear using Plex. I’ve go this message at boot, I did some research kernel: hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19) Did not find any valid explanation, but people who got have something similar motherboard and CPU CPU AMD Ryzen 5 76000 with radeon Graphics Tuf Gaming B650m-e wifi My memory is vulcan DDR5 2x16gb 6000Mhz. From what I’ve understand of the link you sended there is a limit of speed to use for linux ? Not sure.

I did a short memtest since erre are usully pretty quick to find, I could try to let it finish. I will also try to run the server one One stick at a time.

@SquidHere we go ! unraid-diagnostics-20250316-1817.zip

I don`t have it with me right now. I will post it later today. Although i`ve got the full syslog.txt. syslog.txt

Hello, i'm using a trial licence to see if UNRAID could fit my need, but right now it's seams to crash very often. It seems to point to a hardware problem, but I can't identify it. Thing to note I use an Asus Hyper M.2 x16 Gen 4 Card with 4 disk NVMe in bifurcation. Here the part of the log that look problematic. If someone could help me it would be greatly appreciated. Thanks. message.txt