Rabalder

I removed tailscale from my plugin, and it seems to have solved the issue. I must have done a bad job setting tailscale up.

C:\Users\Raba\Downloads\asasd>iperf3 -c 10.0.0.25 Connecting to host 10.0.0.25, port 5201 [ 4] local 100.80.152.29 port 63533 connected to 10.0.0.25 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 1.12 MBytes 9.44 Mbits/sec [ 4] 1.00-2.01 sec 1.50 MBytes 12.5 Mbits/sec [ 4] 2.01-3.01 sec 1.38 MBytes 11.6 Mbits/sec [ 4] 3.01-4.00 sec 896 KBytes 7.39 Mbits/sec [ 4] 4.00-5.01 sec 1.12 MBytes 9.32 Mbits/sec [ 4] 5.01-6.01 sec 1.25 MBytes 10.5 Mbits/sec [ 4] 6.01-7.00 sec 1.00 MBytes 8.45 Mbits/sec [ 4] 7.00-8.01 sec 640 KBytes 5.19 Mbits/sec [ 4] 8.01-9.01 sec 768 KBytes 6.31 Mbits/sec [ 4] 9.01-10.01 sec 768 KBytes 6.33 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.01 sec 10.4 MBytes 8.70 Mbits/sec sender [ 4] 0.00-10.01 sec 10.0 MBytes 8.38 Mbits/sec receiver iperf Done. C:\Users\Raba\Downloads\asasd>iperf3 -c 10.0.0.25 -R Connecting to host 10.0.0.25, port 5201 Reverse mode, remote host 10.0.0.25 is sending [ 4] local 100.80.152.29 port 63600 connected to 10.0.0.25 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 1.51 MBytes 12.6 Mbits/sec [ 4] 1.00-2.01 sec 2.44 MBytes 20.4 Mbits/sec [ 4] 2.01-3.00 sec 2.99 MBytes 25.3 Mbits/sec [ 4] 3.00-4.00 sec 2.73 MBytes 22.9 Mbits/sec [ 4] 4.00-5.00 sec 2.76 MBytes 23.2 Mbits/sec [ 4] 5.00-6.00 sec 2.75 MBytes 23.0 Mbits/sec [ 4] 6.00-7.00 sec 2.75 MBytes 23.1 Mbits/sec [ 4] 7.00-8.00 sec 2.06 MBytes 17.3 Mbits/sec [ 4] 8.00-9.00 sec 3.34 MBytes 28.1 Mbits/sec [ 4] 9.00-10.00 sec 2.74 MBytes 23.0 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 29.9 MBytes 25.1 Mbits/sec 38 sender [ 4] 0.00-10.00 sec 26.7 MBytes 22.4 Mbits/sec receiver iperf Done. C:\Users\Raba\Downloads\asasd>

This is one during a 4k stream. The stream keeps buffering. nas-diagnostics-20260623-1956.zip

Here is diagnostic during a single transfer from my pc to my NAS. nas-diagnostics-20260623-1951.zip

Suddenly when I try to transfer files from my computer to my NAS, the speed goes from 2 MB/s down to 700kB/s and its bouncing between those speeds. My setup has 1 GB/s, and I have had that speed before, but now it's unusable. I use 2 14 tb HD's and one 2 TB nvme for caching. I have tried to switch the position of the drives in the Jonsbro N4 case without any changes. nas-smart-20260622-2104.zip nas-smart-20260622-1820.zip nas-smart-20260623-1828.zip

Thank you for checking out the SMART reports, and for helping me.

How strange. The extended test just finished, and I'm attaching that one as well. Can there be a fault with one of the cables? Or maybe the hot swap rack in my Jonsbo N3 cabinet is broken. nas-smart-20251116-1341.zip

I have a 6-bay NAS with hot-swap drive bays, but since I only had two drives at the time, I only connected those two to the motherboard. I got some extra cables and connected all the bays, then moved the bad drive to another bay. After doing that, I was able to find it again. I just ran a SMART short self test and will attach it to the post. nas-smart-20251116-1312.zip

I have 2 identical drives and one of them seems to have issues. I cant find any of them in the bios, but the other one is working so i dont know. Bios vendor: CWWK Core version: 5.27 Compliancy: UEFI 2.8; PI 1.7 Project version: CWRKA03

I logged in to the system recently and found that my parity drive seems dead. I tried to unmount it and remount it, and now it does now show up in the system at all. Before I did anything, I downloaded the smart report and have attached it to this post. I don't know how to read this stuff as I'm not that savvy with this stuff and hope some of you guys might be able to help me. nas-smart-20251111-0827.zip