nowasforjason

Heavens to betsy, that worked😩 Thank you very much, sir.

Thank you for the help🙇‍♂️ Yes, this was a new pool on a new NAS. The 2TB NVMe is in a pool by itself, and the two 4TB ones are in a ZFS mirror pool. I've attached the diagnostics zip file, is that standard? I can post the code here if that's best practice. I also have the SMART test reports for the 4TB NVME drives if that would be useful. tower-diagnostics-20251129-2212.zip

Hello, first-time Unraid user here. Here's my machine at a glance: Unraid 7.2.2 Beelink ME Mini NAS two 4TB WD Red SN700 NVMe drives both passed MemTest86 both passed SMART test one 2TB Crucial NVMe same as above I've been slowly configuring my home network over the past few months, yesterday finally got around to actually mounting my NVMes and ran into a problem. The 2TB drive mounted fine, but the 4TB in a ZFS mirror pool return the error "Unmountable: wrong or no file system". I tried troubleshooting through Gemini 3, but got nowhere. I erased the formatted partition a handful of times, rebooted the router, a few other things, but still getting the same error. I thought maybe the NAS's slot arrangement was the problem--slot 4 in the NAS has faster read/write than the other slots--so I took the drive in that slot out and put it in a standard-speed slot, but the mounting error remains. Does anybody have any idea what might be going on? The drives seem to be healthy, of course they're both still under warranty, but I wonder if I've just configured something wrong that's causing them to return an error.

Hello everyone, first time posting here. I've got one of those Beelink Mini MEs that were popular this summer, and I'm just about ready to start the array. I've got a 4TB mirror ready to go, but I'm wondering about the Autotrim setting. Default is On, but my AI helper says that I should turn it off: I'm totally new to this, so I figured I'd ask here before blindly following algorithmic advice. What would you recommend? My setup: Unraid 7.2 two 4TB WD Red NVMes ZFS mirror Scrub schedule set to monthly (maybe not relevant to this issue?) Thanks for any help you can give🙏