sdesbure

May 31, 2022

What I'll do :
* replace controller card from broadcom to LSI
* upgrade disk4 (I was planning to upgrade disk3 as it's the smallest / nearly full but let's do that )

I'll keep you posted.

Do you prefer that I mark your proposal as "solution" or do we wait for the hardware?

May 31, 2022

So I first did it with docker / vms enabled:

Linux 5.15.43-Unraid (nas)      05/31/2022      _x86_64_        (4 CPU)

11:38:38 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:38:43 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:43 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:43 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:43 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:43 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:43 AM       sdc     11.20   1792.00      0.00    160.00      0.05      4.32      2.55      2.86
11:38:43 AM       sdb     19.60   2234.40      0.00    114.00      0.18      9.21      6.06     11.88
11:38:43 AM       sdd     21.60   1872.00     69.60     89.89      0.13      5.78      2.38      5.14
11:38:43 AM       sde     13.40   1827.20      0.00    136.36      0.04      2.84      2.72      3.64
11:38:43 AM       sdf     31.60   2077.60     68.80     67.92      6.10    186.13     27.04     85.46
11:38:43 AM       sdg      0.20      0.00      8.80     44.00      0.00      0.00      1.00      0.02
11:38:43 AM       sdh     11.60   1792.80      0.80    154.62      0.04      3.16      2.53      2.94

11:38:43 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:38:48 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM       sdc     20.00   1760.00      0.00     88.00      0.04      1.83      2.75      5.50
11:38:48 AM       sdb     55.40   2312.80      0.00     41.75      0.72     12.98      9.03     50.02
11:38:48 AM       sdd     43.60   1989.60    247.20     51.30      0.28      5.11      2.71     11.82
11:38:48 AM       sde     25.20   1823.20      0.00     72.35      0.09      3.76      3.55      8.94
11:38:48 AM       sdf     58.80   2248.00    212.00     41.84      5.92     93.95     16.08     94.54
11:38:48 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:48 AM       sdh     20.40   1761.60      0.00     86.35      0.03      1.38      1.81      3.70

11:38:48 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:38:53 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:53 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:53 AM     loop2      3.40      8.00     22.40      8.94      0.00      0.59      0.41      0.14
11:38:53 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:53 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:38:53 AM       sdc     28.40   2008.80      0.00     70.73      0.06      1.99      2.15      6.12
11:38:53 AM       sdb     82.60   2552.80      0.00     30.91      1.47     17.76     10.31     85.14
11:38:53 AM       sdd    101.40   2341.60    523.20     28.25     11.64    113.16      3.55     35.98
11:38:53 AM       sde     33.40   1680.80      0.00     50.32      0.12      3.46      3.51     11.74
11:38:53 AM       sdf    102.60   2134.40    558.40     26.25     28.23    272.41      7.57     77.64
11:38:53 AM       sdg     22.20     24.00    201.60     10.16      0.01      0.21      0.25      0.56
11:38:53 AM       sdh     25.80   1558.40      0.00     60.40      0.02      0.88      1.59      4.10
^C


Average:          DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
Average:        loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:        loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:        loop2      1.13      2.67      7.47      8.94      0.00      0.59      0.41      0.05
Average:        loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:          sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:          sdc     19.87   1853.60      0.00     93.30      0.05      2.38      2.43      4.83
Average:          sdb     52.53   2366.67      0.00     45.05      0.79     15.02      9.33     49.01
Average:          sdd     55.53   2067.73    280.00     42.28      4.01     70.96      3.18     17.65
Average:          sde     24.00   1777.07      0.00     74.04      0.08      3.45      3.38      8.11
Average:          sdf     64.33   2153.33    279.73     37.82     13.42    203.91     13.35     85.88
Average:          sdg      7.47      8.00     70.13     10.46      0.00      0.21      0.26      0.19
Average:          sdh     19.27   1704.27      0.27     88.47      0.03      1.51      1.86      3.58

(I stopped before the end, maybe I shouldn't have...)

then I stopped, waited for load to cool down (from ~11 to ~2):

Linux 5.15.43-Unraid (nas)      05/31/2022      _x86_64_        (4 CPU)

11:50:26 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:50:31 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM       sdc    399.00 134265.60      0.00    336.51      0.60      1.51      1.47     58.76
11:50:31 AM       sdb    200.00 134400.00      0.00    672.00      6.87     34.34      5.00     99.92
11:50:31 AM       sdd    399.60 134265.60      0.00    336.00      0.60      1.49      1.46     58.48
11:50:31 AM       sde    399.80 134400.00      0.00    336.17      1.33      3.32      2.45     97.94
11:50:31 AM       sdf    397.00 134400.00      0.00    338.54      1.87      4.71      2.51     99.80
11:50:31 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:31 AM       sdh    397.20 134400.00      0.00    338.37      1.84      4.64      2.51     99.80

11:50:31 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:50:36 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM       sdc    389.00 132115.20      0.00    339.63      0.65      1.66      1.51     58.86
11:50:36 AM       sdb    196.60 132115.20      0.00    672.00      6.85     34.85      5.07     99.70
11:50:36 AM       sdd    393.40 132115.20      0.00    335.83      0.58      1.47      1.45     57.22
11:50:36 AM       sde    393.20 132115.20      0.00    336.00      1.30      3.30      2.44     95.86
11:50:36 AM       sdf    390.60 132115.20      0.00    338.24      1.83      4.69      2.54     99.28
11:50:36 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:36 AM       sdh    387.00 131968.00      0.00    341.00      1.85      4.78      2.56     98.94

11:50:36 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:50:41 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM       sdc    397.40 135072.00      0.00    339.89      0.63      1.59      1.49     59.08
11:50:41 AM       sdb    200.80 134937.60      0.00    672.00      6.84     34.05      4.96     99.54
11:50:41 AM       sdd    402.00 135072.00      0.00    336.00      0.59      1.46      1.44     58.04
11:50:41 AM       sde    401.40 135072.00      0.00    336.50      1.32      3.28      2.41     96.86
11:50:41 AM       sdf    390.40 134937.60      0.00    345.64      1.89      4.83      2.52     98.36
11:50:41 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:41 AM       sdh    394.60 135084.80      0.00    342.33      1.85      4.69      2.51     99.04

11:50:41 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:50:46 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM       sda      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM       sdc    400.00 134400.00      0.00    336.00      0.60      1.50      1.47     58.82
11:50:46 AM       sdb    200.00 134400.00      0.00    672.00      6.87     34.33      5.00    100.02
11:50:46 AM       sdd    400.00 134400.00      0.00    336.00      0.60      1.50      1.46     58.46
11:50:46 AM       sde    399.60 134265.60      0.00    336.00      1.33      3.33      2.46     98.18
11:50:46 AM       sdf    399.20 134400.00      0.00    336.67      1.87      4.68      2.50     99.88
11:50:46 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:46 AM       sdh    399.40 134400.00      0.00    336.50      1.84      4.61      2.50     99.90

11:50:46 AM       DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
11:50:51 AM     loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:51 AM     loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:51 AM     loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:51 AM     loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:51 AM       sda      0.60      0.00      0.30      0.50      0.00      3.00      3.33      0.20
11:50:51 AM       sdc    380.00 129293.60      0.00    340.25      0.94      2.49      1.58     60.00
11:50:51 AM       sdb    192.60 129293.60      0.00    671.31      6.49     33.71      4.91     94.64
11:50:51 AM       sdd    384.20 129293.60      0.00    336.53      0.59      1.54      1.44     55.20
11:50:51 AM       sde    383.00 129293.60      0.00    337.58      1.26      3.29      2.39     91.58
11:50:51 AM       sdf    365.80 129297.60      0.00    353.47      2.05      5.59      2.58     94.38
11:50:51 AM       sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
11:50:51 AM       sdh    366.80 129300.00      0.00    352.51      1.83      5.00      2.57     94.20

Average:          DEV       tps     rkB/s     wkB/s   areq-sz    aqu-sz     await     svctm     %util
Average:        loop0      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:        loop1      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:        loop2      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:        loop3      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:          sda      0.12      0.00      0.06      0.50      0.00      3.00      3.33      0.04
Average:          sdc    393.08 133029.28      0.00    338.43      0.68      1.74      1.50     59.10
Average:          sdb    198.00 133029.28      0.00    671.87      6.78     34.26      4.99     98.76
Average:          sdd    395.84 133029.28      0.00    336.07      0.59      1.49      1.45     57.48
Average:          sde    395.40 133029.28      0.00    336.44      1.31      3.30      2.43     96.08
Average:          sdf    388.60 133030.08      0.00    342.33      1.90      4.89      2.53     98.34
Average:          sdg      0.00      0.00      0.00      0.00      0.00      0.00      0.00      0.00
Average:          sdh    389.00 133030.56      0.00    341.98      1.84      4.74      2.53     98.38

sdg is cache and sda is flash

May 31, 2022

yep, that's what I was planning to use (an HBA working out of the box)

thanks!

May 31, 2022

And thanks for both of you for helping me!

May 31, 2022

I've just stopped all dockers and the VM (jeedom) and launched a diagnostic

FYI, instead of ~15Mb/s, I now have ~33Mb/s (less than 6.9.x with all dockers and VM started)

nas-diagnostics-20220531-1100.zip

May 31, 2022

Yes of course sorry,
Here it is (from yesterday, but nothing has changed since)

nas-diagnostics-20220530-2000.zip

May 31, 2022

Hello,

since I've upgraded to 6.10.1 (and then 6.10.2), parity check seems to be very slow (move from ~1.5 day at 59.8 MB/s to 6 days at 15.3 MB/s)...

I've looked at logs and I can see that one of the drive negotiate at low sata speed (this is the purple one in the sceenshot).

it's still "quite" fast (and not too low compared to other), so I was wondering if something else can the cause ?

May 31, 2022

Hello,
I'm using an 88SE9215 marvel controller for 4 of 7 disks.
It seems to work OK (the drives are the bottom except "purple" one + cache) but we can see that the speed is lower.

I was thinking to move the drive to an LSI controller.

Can I do it by just swapping the cards (and changing the cables)?

April 24, 2017

Hello,

seems to be an user permission. Look if permissions of your folder is OK

November 14, 2015

Well, I think that's because there's no answer from the trackers (I have the same with t411.io...). They tried to only answers with results from the category but it screws sonar...

November 11, 2015

The update is there and you have to check because I never had the issue...

November 11, 2015

Hello, update for Jackett is ongoing and should be there within an hour!

November 5, 2015

Hello,

I'll do that ASAP!

September 7, 2015

Hello,

I was on holidays without laptop sorry.

I did update jackett to 0.6.3 2 days ago and 0.6.4 today.

August 2, 2015

Hello this is the continuation of the questions I've asked in preclear topic. Since it's a 6.0 Unraid that I have, it seems to be more efficient to put it there :

Hello Guys,

I bought a new hard drive on friday and installed it on my NAS (unraid 6.0.1). it's a WD 3T (WDC_WD30EZRX-00D8PB0_WD-WMC4N0JAPE9L)

So I used preclear script in order to clear it using the web plugin (from gfjardim). After a long pre read part (starting from 4.4Mb/s, ending à ~75MB/s), my disk went to preclear but a lot more faster (~220 MB/s).

At the end of the process, the system was weird (no possibility to see the exit of the command) so I decided to reboot and redo (withour pre / post read)

And I have this error:

================================================================== 1.15
=                unRAID server Pre-Clear disk /dev/sde
=               cycle 1 of 1, partition start on sector 1
=
= Step 1 of 10 - Copying zeros to first 2048k bytes             DONE
= Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE
= Step 3 of 10 - Disk is now cleared from MBR onward.           DONE
= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4       DONE
= Step 5 of 10 - Clearing MBR code area                         DONE
= Step 6 of 10 - Setting MBR signature bytes                    DONE
= Step 7 of 10 - Setting partition 1 to precleared state        DONE
= Step 8 of 10 - Notifying kernel we changed the partitioning   DONE
= Step 9 of 10 - Creating the /dev/disk/by* entries             DONE
= Step 10 of 10 - Verifying if the MBR is cleared.              DONE
=
Elapsed Time:  3:34:17
========================================================================1.15
==
== SORRY: Disk /dev/sde MBR could NOT be precleared
==
== out4= 00000
== out5= 00000
============================================================================
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.000240382 s, 0.0 kB/s
0000000

I took a look into /var/log/messages and there's huge amount of this comments:

Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: 139 callbacks suppressed
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860532992
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860532992
Aug  1 13:54:19 nas kernel: buffer_io_error: 134 callbacks suppressed
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566624, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a0 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533152
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a0 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533152
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566644, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 0, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 8
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 1, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a8 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533160
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566645, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a8 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533160

and also some of these errors:

Aug  1 10:21:14 nas kernel: ata2.00: exception Emask 0x0 SAct 0x1fffffff SErr 0x0 action 0x6 frozen
Aug  1 10:21:14 nas kernel: ata2.00: failed command: WRITE FPDMA QUEUED
Aug  1 10:21:14 nas kernel: ata2.00: cmd 61/e8:00:b8:b8:09/07:00:00:00:00/40 tag 0 ncq 1036288 out
Aug  1 10:21:14 nas kernel:         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Aug  1 10:21:14 nas kernel: ata2.00: status: { DRDY }
...
Aug  1 10:21:14 nas kernel: ata2.00: status: { DRDY }
Aug  1 10:21:14 nas kernel: ata2: hard resetting link
Aug  1 10:21:24 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:21:24 nas kernel: ata2: hard resetting link
Aug  1 10:21:34 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:21:34 nas kernel: ata2: hard resetting link
Aug  1 10:22:09 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:22:09 nas kernel: ata2: limiting SATA link speed to 1.5 Gbps
Aug  1 10:22:09 nas kernel: ata2: hard resetting link
Aug  1 10:22:14 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:22:14 nas kernel: ata2: reset failed, giving up
Aug  1 10:22:14 nas kernel: ata2.00: disabled
Aug  1 10:22:14 nas kernel: ata2.00: device reported invalid CHS sector 0
...
Aug  1 10:22:14 nas kernel: ata2: EH complete
Aug  1 10:22:14 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 10:22:14 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 09 b0 d0 00 00 07 e8 00 00
Aug  1 10:22:14 nas kernel: blk_update_request: I/O error, dev sde, sector 635088
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79386, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79387, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79388, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79389, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79390, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79391, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79392, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79393, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79394, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79395, lost async page write

Any clue of what happened? Do I have to RMA the disk?

I tried a new preclear but I stopped at the "start" of the pre read (running et less than 1MB/S...).

Attached smart status (which seems clear...) and the syslog (where we see the errors shown before, but no other ones...).

I tried with another HDD on the same SATA Card (but not port) and It worked smoothly.

To be honest, I think that I'll return the HDD to amazon. What do you think?

smart.txt

syslog-pre-clear-2015-08-02.txt

User Customizations · August 1, 2015

Too early to tell without the right info. We need to see the full syslog and the SMART reports for the drive. Please see Need help? Read me first!, and attach the diagnostics zip. It includes the SMART reports and a complete syslog. When there are disk errors, you always want to see the very first ones, the rest are usually just after effects of the initial failure. From what I can see above, the drive lost contact with the system, and the kernel disabled it. Typically, there's nothing wrong with the drive in that situation, but we cannot say for sure without seeing the earliest errors.

Hello Robj.

First, Thank you for answering. Second, I didn't saw the "Read Me first" and I apologize for that.

In order to check if the issue was from the disk or for any other stuff, I've started a preclear on a spare drive (1Tb this one). So I had to reboot...

I'll wait for the preclear to be finished and I'll start back the preclear on the 3Tb (because it's so far so good on the 1Tb disk).

And I'll create a topic accordingly.

Thanks again,

Sylvain

User Customizations · August 1, 2015

Hello Guys,

I bought a new hard drive on friday and installed it on my NAS (unraid 6.0.1). it's a WD 3T (WDC_WD30EZRX-00D8PB0_WD-WMC4N0JAPE9L)

So I used preclear script in order to clear it using the web plugin (from gfjardim). After a long pre read part (starting from 4.4Mb/s, ending à ~75MB/s), my disk went to preclear but a lot more faster (~220 MB/s).

At the end of the process, the system was weird (no possibility to see the exit of the command) so I decided to reboot and redo (withour pre / post read)

And I have this error:

================================================================== 1.15
=                unRAID server Pre-Clear disk /dev/sde
=               cycle 1 of 1, partition start on sector 1
=
= Step 1 of 10 - Copying zeros to first 2048k bytes             DONE
= Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE
= Step 3 of 10 - Disk is now cleared from MBR onward.           DONE
= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4       DONE
= Step 5 of 10 - Clearing MBR code area                         DONE
= Step 6 of 10 - Setting MBR signature bytes                    DONE
= Step 7 of 10 - Setting partition 1 to precleared state        DONE
= Step 8 of 10 - Notifying kernel we changed the partitioning   DONE
= Step 9 of 10 - Creating the /dev/disk/by* entries             DONE
= Step 10 of 10 - Verifying if the MBR is cleared.              DONE
=
Elapsed Time:  3:34:17
========================================================================1.15
==
== SORRY: Disk /dev/sde MBR could NOT be precleared
==
== out4= 00000
== out5= 00000
============================================================================
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.000240382 s, 0.0 kB/s
0000000

I took a look into /var/log/messages and there's huge amount of this comments:

Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: 139 callbacks suppressed
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860532992
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860532992
Aug  1 13:54:19 nas kernel: buffer_io_error: 134 callbacks suppressed
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566624, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a0 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533152
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a0 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533152
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566644, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 0
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 0, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 8
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 1, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a8 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533160
Aug  1 13:54:19 nas kernel: Buffer I/O error on dev sde, logical block 732566645, async page read
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 13:54:19 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x88 88 00 00 00 00 01 5d 50 a3 a8 00 00 00 08 00 00
Aug  1 13:54:19 nas kernel: blk_update_request: I/O error, dev sde, sector 5860533160

and also some of these errors:

Aug  1 10:21:14 nas kernel: ata2.00: exception Emask 0x0 SAct 0x1fffffff SErr 0x0 action 0x6 frozen
Aug  1 10:21:14 nas kernel: ata2.00: failed command: WRITE FPDMA QUEUED
Aug  1 10:21:14 nas kernel: ata2.00: cmd 61/e8:00:b8:b8:09/07:00:00:00:00/40 tag 0 ncq 1036288 out
Aug  1 10:21:14 nas kernel:         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Aug  1 10:21:14 nas kernel: ata2.00: status: { DRDY }
...
Aug  1 10:21:14 nas kernel: ata2.00: status: { DRDY }
Aug  1 10:21:14 nas kernel: ata2: hard resetting link
Aug  1 10:21:24 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:21:24 nas kernel: ata2: hard resetting link
Aug  1 10:21:34 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:21:34 nas kernel: ata2: hard resetting link
Aug  1 10:22:09 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:22:09 nas kernel: ata2: limiting SATA link speed to 1.5 Gbps
Aug  1 10:22:09 nas kernel: ata2: hard resetting link
Aug  1 10:22:14 nas kernel: ata2: softreset failed (timeout)
Aug  1 10:22:14 nas kernel: ata2: reset failed, giving up
Aug  1 10:22:14 nas kernel: ata2.00: disabled
Aug  1 10:22:14 nas kernel: ata2.00: device reported invalid CHS sector 0
...
Aug  1 10:22:14 nas kernel: ata2: EH complete
Aug  1 10:22:14 nas kernel: sd 3:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Aug  1 10:22:14 nas kernel: sd 3:0:0:0: [sde] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 09 b0 d0 00 00 07 e8 00 00
Aug  1 10:22:14 nas kernel: blk_update_request: I/O error, dev sde, sector 635088
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79386, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79387, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79388, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79389, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79390, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79391, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79392, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79393, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79394, lost async page write
Aug  1 10:22:14 nas kernel: Buffer I/O error on dev sde, logical block 79395, lost async page write

Any clue of what happened? Do I have to RMA the disk?

July 28, 2015

I built a new image with one more volume (/opt/Jackett/.config/Jackett) with should allow to make it work correctly. I have tested it and it work with my two trackers (and config is "saved").

Still having the same problem on my 2 trackers....

yep some trackers sometimes stops to work

can you retest (version 0.5.1) ?

July 17, 2015

thanks for the topic!

I'm currently running plex directly on unraid ans was considering moving to a container (especially for auto update...).

I'm waiting the answers of the owners now

July 17, 2015

I did a little tweaking to icon, to make it less harsh and less contrasty. Feel free to use it it you like it.

http://i.imgur.com/Hr8quvV.png

used this one!

Thanks

July 16, 2015

I built a new image with one more volume (/opt/Jackett/.config/Jackett) with should allow to make it work correctly. I have tested it and it work with my two trackers (and config is "saved").

July 16, 2015

Where did you get the release of 0.4.3.1? That's the version it shows running, where I'm running the latest they show available (precompiled anyway) at 0.4.3.0 on my install.

I compiled from source on my windows box, and the current source does show 0.4.3.1. Upgraded my install (from my original Jackett), and it still allows me to add Torrent Day. Not sure why yours isn't working correctly.

I also went so far as to replace the jackett install in your docker I have running, and the code I compiled won't allow it to be added on your docker install running my code. Could be a dependency or something possibly?

it's directly a build from git (my fork to add frenchtorrentdb). I'll check tonight sorry!

July 16, 2015

Hello, not sure it's the right place but can you add my repository to the list? (this one https://github.com/sdesbure/docker-containers)

thanks!

Just woke up. Gimme an hour or two.

Added.

You should add the <Date> entry to the template so that it shows up in the new / updated list.

If you're running CA using Kode's feed, then the app should be available within two hours. If you're not using Kode's feed with CA, the App is available immediately. (Working on an update to alleviate this to a certain extent)

Hi and thanks!

I'll test in the next 2 hours!

July 16, 2015

Hi, I tested only with t411.io and frenchtorrentdb (that I have coded) where I have accounts.

On which tracker do you have tested?

July 16, 2015

It would be a good idea to add the <Date> entry that docker categorizer creates to your template so that it shows up in CA's new / updated list

that's done

sdesbure

Posts

Joined

Last visited

Content Type

Profiles

Forums

Downloads

Store

Gallery

Bug Reports

Documentation

Landing

Posts posted by sdesbure

Slow drive and super slow parity check

Slow drive and super slow parity check

Changing SATA Controller?

Slow drive and super slow parity check

Slow drive and super slow parity check

Slow drive and super slow parity check

Slow drive and super slow parity check

Changing SATA Controller?

[support] sdesbure docker repository

[support] sdesbure docker repository

[support] sdesbure docker repository

[support] sdesbure docker repository

[support] sdesbure docker repository

[support] sdesbure docker repository

Issue with preclear on my new disk

Re: preclear_disk.sh - a new utility to burn-in and pre-clear disks for quick add

Re: preclear_disk.sh - a new utility to burn-in and pre-clear disks for quick add

[support] sdesbure docker repository

Plex Tip - Choosing a Plex Docker

[support] sdesbure docker repository

[support] sdesbure docker repository

[support] sdesbure docker repository

[Plug-In] Community Applications

[support] sdesbure docker repository

[support] sdesbure docker repository