rippernz
-
Posts
79 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by rippernz
-
-
2 hours ago, markinsutton said:
having the same issue. all my containers are working and I get ping response back from unraid but GUI is unable to display page. are you using the Beta my servers addon? I am wondering if it something to do with unraid.net not resolving addresses?
Yes, im using the my server Beta plugin.
1 hour ago, trurl said:Reboot in SAFE mode
will try and disable the plugin see then reboot.
EDIT:
Removed the dynamix.unraid.net.plg from the plugins folder and reboot and im back in
is it something down on the Unraid side of things if i wasn't the only one?
-
All of a sudden today i lost access to the GUI, i don't know if it was or last night but today everything stopped working, dockers etc.
i have tried a reboot of Unraid and its maid no difference to the GUI interface but it has bought the Dockers back online again.
I have tried to the server GUI through boot and this is off line also.
I still have access to SSH and have attached the logs for assistance lion-diagnostics-20210605-2236.zip
i have waited hrs for the GUI to come back up after the restart and no luck
I have not deleted any file and no one at home would have a clue on how to delete from Unraid, not even the 2 dogs and cat.
There is a lot of this in the logs though
Jun 5 22:26:54 Lion root: Getting package.json path for unraid-api Jun 5 22:26:54 Lion root: [Error: ENOENT: no such file or directory, open '/package.json'] { Jun 5 22:26:54 Lion root: errno: -2, Jun 5 22:26:54 Lion root: code: 'ENOENT', Jun 5 22:26:54 Lion root: syscall: 'open', Jun 5 22:26:54 Lion root: path: '/package.json' Jun 5 22:26:54 Lion root: }Thanks for your help.
-
9 hours ago, gfjardim said:
Download all these files into your flash drive (/boot/config/plugins/preclear.disk/) and reboot the server.
https://github.com/gfjardim/unRAID-plugins/raw/master/source/packages/libevent-2.1.8-x86_64-1.txz
https://github.com/gfjardim/unRAID-plugins/raw/master/source/packages/tmux-2.7-x86_64-1.txz
https://github.com/gfjardim/unRAID-plugins/raw/master/source/packages/utempter-1.1.6-x86_64-2.txz
https://github.com/gfjardim/unRAID-plugins/raw/master/archive/preclear.disk-2019.02.12c.md5
https://github.com/gfjardim/unRAID-plugins/raw/master/archive/preclear.disk-2019.02.12c.txz
Thanks very much.
-
3 hours ago, gfjardim said:
Which Unraid version are you using?
Running 6.6.6
-
3 hours ago, gfjardim said:
so it's added in version 2019.02.12.
Is there a way to update the plugin offline?
I currently don't have Internet at home apart from my phone and laptop.
Can I download the updated files from somewhere and overwrite the existing as I'm currently trying to preclear 2 x 10TB drives but they get stuck at the 25% of zeroing and says its finished.
-
OK..
After 28 days running with no problems and a parity check completed i enabled backup and restore again and its hung.
Nothing on the console screen
cant access the shares
cant shut it down, have to reset it, power button wont safely shut it down
Can login to the console screen, after typing root it just sits there
i had fix common problems enabled so the logs are attached.
looks like ill be keeping backup & restore disabled
-
Well its been 18 days with out a lockup.
I have had CA backup disabled for the whole time.
Its due to do a monthly parity check tonight so after that is completed i will enable CA backup again and see what happens
Running 6.3.3
-
19 minutes ago, grither said:
happy to hear the rollback worked for you. i was shocked when I still got hangs when i rolled back. its possible i have a different problem, but it sounded so much like this, and other similar posts. Will try to see if its related to the mover running hourly, other than that i'm not sure what else to try
I just typed up a post and clicked somewhere and it was gone,
Anyway i have had 2 lockups in 3 days.
CA backup was enabled and finished about 4am.
Yesterday i thought i had another one (during a parity check) but left it and went out, came home and it was all back to normal.
Today i had another one, left it for a few hrs but was still locked up, CA backup finished about 4am.
The latest files are attached, the FCP log shows "shutting down for system halt" at about 1240pm which i think was about the time i tried to push the power button to get a safe shutdown (no luck) but had to use the reset button.
The console showed nothing but the login prompt, a keyboard was non responsive when plugged in, telnet would not connect but was able to ping the server.
CA backup is currently disabled , i know e have come to the conclusion that its not at fault but for piece of mind i have disabled it.
-
So i decided to upgrade to 6.3.3 2 days ago which is why i haven't posted anything back.
So far so good, the last 2 nights i haven't had any hangs/lockups.
I did note in 6.3.3 that reiserfsprogs has been downgraded, not sure if this is the cause of no lockup or not or even if it makes any difference.
@mgladwinhave you upgraded to 6.3.3 yet?
-
Ok, So the time is now nearly 8.15 am and my backup is still going (started at 3am) i think it was doing this yesterday as well as its also slowing down my parity check (i think).
No dockers were started yesterday due to the backup running (i think), parity check was running at about 4MB /s and everything else was unresponsive after about 2 min of trying to do something. So if the backups are still going the server acts like it is hung. Also yesterday afternoon i tried deleting old backups over the keep threshold and it took over an hr and the server was not responsive for a short while (like it had hung).
are we starting to see that backup & restore is hogging the system during backups?
My current parity check is going at 1.2MB/s and going to take 3 days 21hrs to complete just under 4TB of the 8TB parity drive.
One thing is for sure im able to use the GUI add view the backup that currently happening
-
I have just added this and will see what it does, its due to kick off in about 1 1/2 hrs.
Me, im off to bed now 1.20am here.
-
I still have mine set up to run tomorrow morning so I expect to see a freeze tomorrow or the next day then I shell disable it again and see what happens.
-
So, this morning at about 12.20 i re-enabled CA backup & Restore to backup my appdata and dockers and enabled fix common problems, and i wake up to a hung server.
it had been running about 9 days before i had to restart it due to the log filling up and getting blasted with emails every 10min telling me it was filling up, after that restart it was up about 1 days 15hrs before i re-enabled CA backup & Restore.
is this the problem? does anyone else have this running?
The backup time is 3am, im not sure if this is default or i set it.
i have attached the logs.
-
Well its been 4 days 17 hrs on 6.3.2 with no issues, fix common problems is still running in troubleshooting mode.
nothing on the system has changed from when it was hanging so im a little stumped
-
So im just on 6 days back on 6.3.0 with no issues, i have just re-downloaded 6.3.2 and about to restart for it to take effect, lets see how long it goes before it freaks.
-
Well after reverting back to 6.3.0 I have been up for 3days 8hrs, I never saw this when I was on 6.3.1 or 6.3.2, I'll try updating to 6.3.2 latter and see how long it lasts
-
Good to know, thanks.
-
I also have that on the console line as well so let's see what others say
-
When did yours start? After using grading from what to what?
-
Found a copy of 6.3.0 and copied the 3 files over and it booted up fine, now let's see what happens.
-
21 hours ago, ashman70 said:
No worries, I suspected as much as I'd never heard of unRAID version 3.x before.
So if you rolled back to 6.3.0 are you saying things are stable or were you not on 6.3.0 long enough to know?
It was stable on 6.3.0 had up times of over 30 days, a roll back is my next step to see what it does, when i work out how to roll back.
-
7 hours ago, ashman70 said:
So walk me through your upgrade path, you started this thread saying you had upgraded from 3.1.0 to 3.1.1 and 3.1.2
Did you mean 6.1.0 to 6.1.1 to 6.1.2?
When did your problems start?
OK, now i feel like to total dickhead, i don't know where i got the versions of 3.1.x from it should have bee 6.3.0 upgraded to 6.3.1 and 6.3.2. and the problem happened from the 6.3.1 upgrade.
I so sorry to you for trying to help me with something i have given you wrong version information for.
-
7 minutes ago, ashman70 said:
So what version did you upgrade from to get to 6.3.2? Perhaps if someone looks at your logs they can get a better idea of what is going on.
Upgrade was from 6.3.1, all upgrades have been done via the plugin upgrade from v6 onwards
-
1 hour ago, ashman70 said:
So just to get an understanding of your system, you have the motherboard, CPU, integrated network card I am guessing? What are the drives plugged into? How are system and drive temperatures?
so the drive details are attached, temps are OK as a parity check is running.
yes nic is integrated into the MB, the drives are attached to 2 x 8 port PCI-E cards crossed flash to LSISAS2008: FWVersion(20.00.04.00), ChipRevision(0x03), BiosVersion(07.39.00.00) (1 x IBM, 1 x Dell)
[Plugin][BETA] Appdata.Backup
in Plugin Support
Posted
Is there going to be an option to exclude folders?
eg. plex metadata