Khalid

Any idea what this one is? Trying to looks for a similar piece on website like mouser electronic.

Cool thank you for your input. From what my brother and the people he work for, told me. If the diode has work as intented, it would have sacrifice itself to save the board. I also saw some video that people were using and hard drive without diodes to copy/mirror the data for recovery. From what they told me, running a hard drive without diode is a bit unsafe because, there would not be anymore second chance. https://community.wd.com/t/hdd-tvs-diode-faq/14692 I will take some time to think about it, I only lend 2 drives to my brother so he can check them out with the people he work with and I am trying to RMA my original PSU. Also, I am doing investigation on the diodes replacements and PCB replecements. Not getting my data back is not the end of the world, but there are some stuff that if I could get back, it would be nice. My ideal scenario, I could replace the diodes, copy my data that I care more about on something else and use these old drives this until they die (or better if they don't).

HGST_HDN726060ALE614 (x2) HGST_HDS5C4040ALE630 ST4000DM000-1F2168 (x4) ST4000DM005-2DP166 HGST_HDN726050ALE610 STBV5000100 -------------------------- Reading on the PCB swap, I read a bit on HDDZone that even if its works, it would not be a permanent solution, it's only temporary to recover data? The hardware team at my brother workplace said that maybe they can open the drives and check if they could just replace the diodes. He said there is a guy that is pretty good with soldering if I need it. Let says I can fix one drive, would I be able to start the array with one drive or is there a minimum number of working drives that I need? For the warranty, what would be my chances? 0%? What would happened if I send it to them and they refused, will they send me back the drives? Thanks.

Yeah, this might have been my issue, I changed the Power cable, the cable were it was written CPU and the Cable were it was written motherboard. i didn't pay attention to the one were I had to connect to Sata1 and Sata2 and used the one that were connect to the server. Lesson learned... Costly mistake... I just want to thanks everyone for chiming in, at least I will try to never do this mistake again. I will take quick look a donordrives. If you guys know any Canadian alternatives for parts or repair service. Let me know. Thanks. I probably won't do it because of cost, but I am just curious.

The old one was semi modular and the new one was modular. Yes, I used the new power cable, cpu cable and motherboard cable from the new PSU, I believe I used the old cable to attach to the part where it was written sata 1 and sata 2. Thanks.

I am dying a bit more from the inside, but thank you for your input, everyone. I will lower my expectation from the warranty of these drives... Feels so sad and a bit lost...

Damn, this really suck... Any idea what is killing drive that I am adding to Server? Had this ever happened before to anyone else? Lost 9 drives that were on the server (3 still on warranty) and another I was adding I could return and another one out of warranty from my PC. Thank you.

Hi guys, I am going a bit crazy, not sure if I lost everything or not. I was preclearing a new disk and I smell a bit of a burn smell and I saw that my server was shut down. PSU seems to have died, I tried using another one that my brother bought because he is building a PC soon. With that PSU, I was able to boot the server. No disks are getting detected, I tried putting 2 of these disks in my Windows 10 computer to see if I will see but I didn't see them at all with the Disk Management tools. I tried putting one on my existing Windows 10 Hard Drive on my server and it did not detect the disk. I tried putting that disk back in my Windows 10 and I don't see it anymore... Any help would be nice, right now I think it's over... Thanks.

I had the exact same issue has this guy. https://lime-technology.com/forum/index.php?topic=42131.0 But I managed to re-install Plex, Transmission and Emby Server by playing with the validation that is checking the internet connection. Just setting HasNet to "no" was fine. Like the guy in that thread I was able to ping stuff and I was able to update other non-PhAzE plugins. I am still not sure what is the issue with the internet connection.

Not too sure what happens or what to do. I am getting this with Plex and Transmission Plugin. plugin: installing: /boot/config/plugins-error/Plexmediaserver.plg Installing Plexmediaserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 I can update others unraid plugins without any issues. If I try download the Emby plugins. I get this. plugin: installing: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg ... done Installing Embyserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Mono file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 Thanks.

I am also getting this when I am trying to upgrade from 3.0.5391 to 3.0.5395.0 3.0.5390.