Hi everyone. I have been running my unraid box for quite some years now but, recently noticed a problem. The server would constantly reboot every 2-3 minutes. One of my disks is not recognized anymore. So I opened up the server, cleaned everything, made sure all sata cables were plugged in properly and rebooted. Same thing. So again, I opened my box, checked my Seasonic 750 watt psu under load and everything checks out. I plugged in one of those post code debug cards and everything checks out. I installed a Linux OS on a thumb drive so I could stress my pc with the stress command. Even with the thumb drive, the server would reboot 2 to 3 times before stabilizing. I stress tested the cpu, io, and what not for a few hours and all good. I started memtest and let it run for 24 hours and not one single error. I thought maybe the unraid thumb drive was corrupt but, it rebooted when I tried it with another OS. I am in the process of rebuilding my #2 disk after it was recognized and, I hope I did not do anything wrong because sync shows a total size of 4 TB, which is the size of my disk and not the array. Phew, I am running out of wind. Anyway, I downloaded the diagnostic for yesterday and the one today while rebuilding. I don't know how to post them or if they are even needed. Oh BTW, all my dockers are gone and I don't know why. I don't have another psu to swap, in case someone suggests it. Any help would be greatly appreciated.
Don
PS- I included the latest diagnostic. I hope this is the way to do it.
tower-diagnostics-20190805-0321.zip