cherritaker
-
Posts
147 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by cherritaker
-
-
Hello I currently upgraded my unraid and I had to run a parity check and a few of my drives where on the 45-48 C temp. I have WD green and reds is this normal? I have a norco 4224 and have 12 drives total including cache and parity. I replaced stock fans with noctua fans and although they're real quiet in afraid that they're not good for cooling. Anyone know if these temps are normal during parity checks and if my selection of fans was a good idea or should I have gone with different ones. Normally they're at 28-34 C but 3 out of those drives always seem to be on the higher temps.
-
On the docker settings they're /mnt/user0/Music same on the actual subsonic page for where it looks for the music. I have tried both user and user0, I got it working the first time I installed it but that's when my music went away and after I fixed I haven't been able to get it running again.
-
It was weird I accessed the shares folder and hit reset and all my stuff is back. Now the issue I'm having is when I choose the folder on subsonic with my music it says folder not found. My share with all my music is Music so I point subsonic to mnt/user/Music I believe. When I choose that on the sicker settings it shows all my music but on the actual subsonic webpage settings it shows as folder not found. And I have user and user0 both contain the same folders with same files. Is this normal? And I upgrade from 5.0.6 do I have to run permission file?
-
Hello i just recently updated to unraid 6.0.1 and everything was working fine i added the subsonic docker and it worked. Today when i looked at my mapped drives i noticed my music folder was empty i panicked and i checked under \\tower and it shows all my music on the different drives. I also checked shares under Unraid main shares and it's all there under Music/mp3 i see all my files and music i just cant map it. And now my subsonic info all got reset not sure why. And not sure why i can see all my files on the unraid main but when i map it and i check it under explorer as \\tower it shows the music folder as being empty. Only when i check every single drive i see my music.
-
Is the ram good or should i go for 32GB and what would be recommended in this current build being the Supermicro X10SL7-F, Intel E3 1241V3, SeaSonic X-1050. Oh by the way does anyone know of any newegg coupons?
-
Is there any advantages of using the X10SL7-F over the ASRock E3C224 ATX or should i just stick with the supermicro one?
-
So far what i have on my newegg cart is a Intel E3-1276V3, Supermicro X10SL7-F , and Crucial 16GB CT2KIT102472BD160B not sure if its overkill. Pretty much similar components to the link you sent me the 1276 is not set in stone since the 1241 and a few other seems pretty evenly matched only difference would be the built in gpu on the Cpu's. With this being said do you think my Corsair HX650W would be good with this setup or similar one? Or should i go ahead and upgrade that too? Thanks for the input.
-
Hey man thanks that thread just reassured me of what i was leaning to which was a supermicro or asrock mobo with a xeon e3 1231v3 to up to say a e3 1271 v3 or higher. What would be a good set of ram to go with this? Also i see that it only has 2 ports for pci express which if i got a graphic card and my current 8 port supermicro card that would put me at 22 Drives but i want to take advantage of using the 24 drive case but be able to add a gpu if i wanted to how would i go about this with this motherboard?
-
Hello i currently have the latest version of unraid 5 pro. My current set up is a AMD sempron 140 with motherboard M4785-M a Supermicro sas card and a 2 port sas card and a Corsair HX650W power supply and 4 gigs of ddr2 ram. When i built this i was thinking of low power consumption and energy efficient. But with Unraid 6.0 i want to run some virtual machines such as windows 8 and possibly a mac osx and maybe a little bit of gaming. The main use i get out of this machine is for Plex, Sabnzbd, Headphones, Subsonic, Couchpotato, Sickbeard. I know from my hardware maybe the only thing still worth keeping is my psu i have also bought a norco 4224 for my new set up with all noctua fans. I would like some guidance on which route to go as far as ram, cpu, and mobo, and gpu if needed. My budget is up to say 1200 but rather keep it under 1k. I have 13 HDD's counting my parity and cache drive. I'm not sure if i should go with intel or amd and if to go with a i7 or xeon e3 and as far as amd i dont know what would work thanks in advance and i would be buying a new supermicro card since my current motherboard is maxed out.
-
Ok joe this is the 2nd pre clear on the cache drive i only saw 1 sector changed what can you tell me about this would it be ok to use or not?
========================================================================1.13 == invoked as: ./preclear_disk.sh -a -M 4 /dev/sdg == HDS725050KLA360 KRVN68ZAHVNDVG == Disk /dev/sdg has been successfully precleared == with a starting sector of 63 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 3:05:20 (44 MB/s) == Last Cycle's Zeroing time : 2:56:18 (47 MB/s) == Last Cycle's Post Read Time : 7:16:18 (19 MB/s) == Last Cycle's Total Time : 13:19:12 == == Total Elapsed Time 13:19:12 == == Disk Start Temperature: 34C == == Current Disk Temperature: 35C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 157 161 0 ok 35 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 31 sectors had been re-allocated before the start of the preclear. 32 sectors are re-allocated at the end of the preclear, a change of 1 in the number of sectors re-allocated. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdg == Disk: /dev/sdg smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K500 series Device Model: HDS725050KLA360 Serial Number: KRVN68ZAHVNDVG Firmware Version: K2AOAB0A User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Sun Dec 4 21:59:50 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10419) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 599 (Average 425) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 890 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 31 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28408 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 769 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 2051 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 2051 194 Temperature_Celsius 0x0002 161 161 000 Old_age Always - 34 (Lifetime Min/Max 12/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 31 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 433 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 40% 20815 - # 2 Short captive Completed without error 00% 18722 - # 3 Short captive Completed without error 00% 18465 - # 4 Extended captive Interrupted (host reset) 90% 18465 - # 5 Short captive Completed without error 00% 13786 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdg == Disk: /dev/sdg smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K500 series Device Model: HDS725050KLA360 Serial Number: KRVN68ZAHVNDVG Firmware Version: K2AOAB0A User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Mon Dec 5 11:19:00 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10419) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 599 (Average 425) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 890 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 32 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28421 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 769 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 2051 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 2051 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 35 (Lifetime Min/Max 12/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 32 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 433 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 40% 20815 - # 2 Short captive Completed without error 00% 18722 - # 3 Short captive Completed without error 00% 18465 - # 4 Extended captive Interrupted (host reset) 90% 18465 - # 5 Short captive Completed without error 00% 13786 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================
-
Ok i will run it again before i go to work tomorrow since the unraid will be used for now by critical you mean storage and cache or what?
-
Hello i was just wondering if these results were good for this old hitachi hard drive i had laying around to use as a cache drive on my unraid thank you in advance.
========================================================================1.13 == invoked as: ./preclear_disk.sh -a -M 4 /dev/sdg == HDS725050KLA360 KRVN68ZAHVNDVG == Disk /dev/sdg has been successfully precleared == with a starting sector of 63 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 3:05:37 (44 MB/s) == Last Cycle's Zeroing time : 2:56:09 (47 MB/s) == Last Cycle's Post Read Time : 7:15:34 (19 MB/s) == Last Cycle's Total Time : 13:18:36 == == Total Elapsed Time 13:18:36 == == Disk Start Temperature: 33C == == Current Disk Temperature: 35C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 157 166 0 ok 35 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 28 sectors had been re-allocated before the start of the preclear. 31 sectors are re-allocated at the end of the preclear, a change of 3 in the number of sectors re-allocated. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdg == Disk: /dev/sdg smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K500 series Device Model: HDS725050KLA360 Serial Number: KRVN68ZAHVNDVG Firmware Version: K2AOAB0A User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Sun Dec 4 01:20:07 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10419) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 599 (Average 425) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 890 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 28 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28387 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 769 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 2050 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 2050 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 33 (Lifetime Min/Max 12/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 28 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 433 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 40% 20815 - # 2 Short captive Completed without error 00% 18722 - # 3 Short captive Completed without error 00% 18465 - # 4 Extended captive Interrupted (host reset) 90% 18465 - # 5 Short captive Completed without error 00% 13786 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdg == Disk: /dev/sdg smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K500 series Device Model: HDS725050KLA360 Serial Number: KRVN68ZAHVNDVG Firmware Version: K2AOAB0A User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Sun Dec 4 14:38:43 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10419) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 599 (Average 425) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 890 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 31 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28400 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 769 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 2050 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 2050 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 35 (Lifetime Min/Max 12/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 31 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 433 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 40% 20815 - # 2 Short captive Completed without error 00% 18722 - # 3 Short captive Completed without error 00% 18465 - # 4 Extended captive Interrupted (host reset) 90% 18465 - # 5 Short captive Completed without error 00% 13786 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================
-
Hello posting a preclear result for a friend if you guys can help out determining if its good or bad thank you.
========================================================================1.11== invoked as: ./preclear_disk.sh -M 4 /dev/sdf
== WDC WD20EARS-00MVWB0 WD-WCAZA5998739
== Disk /dev/sdf has been successfully precleared
== with a starting sector of 63
== Ran 1 cycle
==
== Using :Read block size = 8225280 Bytes
== Last Cycle's Pre Read Time : 6:20:29 (87 MB/s)
== Last Cycle's Zeroing time : 6:13:53 (89 MB/s)
== Last Cycle's Post Read Time : 12:44:24 (43 MB/s)
== Last Cycle's Total Time : 25:19:54
==
== Total Elapsed Time 25:19:54
==
== Disk Start Temperature: 24C
==
== Current Disk Temperature: 26C,
==
============================================================================
** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf
ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE
Temperature_Celsius = 124 126 0 ok 26
No SMART attributes are FAILING_NOW
0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
0 sectors are pending re-allocation at the end of the preclear,
the number of sectors pending re-allocation did not change.
0 sectors had been re-allocated before the start of the preclear.
0 sectors are re-allocated at the end of the preclear,
the number of sectors re-allocated did not change.
============================================================================
============================================================================
==
== S.M.A.R.T Initial Report for /dev/sdf
==
Disk: /dev/sdf
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WCAZA5998739
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jun 3 18:26:53 2011 Local time zone must be set--see zic m
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1025
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 16
194 Temperature_Celsius 0x0022 126 122 000 Old_age Always - 24
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
============================================================================
==
== S.M.A.R.T Final Report for /dev/sdf
==
Disk: /dev/sdf
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WCAZA5998739
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jun 4 19:46:46 2011 Local time zone must be set--see zic m
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1025
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 24
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 17
194 Temperature_Celsius 0x0022 124 122 000 Old_age Always - 26
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
-
Yes it has a jumper im using the newest full realese of unraid not beta reason for old preclear is i had no idea it updates that often thanks.
-
I'm pretty stupid and don't know how to make heads or tails of the readings from my preclear results. Additionally, I used an older version of preclear so I hope that's not a problem. Is everything fine with this drive?
== invoked as: ./preclear_disk.sh -M 4 /dev/sde == áWDC WD20EARS-00MVWB0 á áWD-WMAZA1147650== Disk /dev/sde has been successfully precleared == with a starting sector of 63 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time á: 7:17:36 (76 MB/s) == Last Cycle's Zeroing time á : 6:11:00 (89 MB/s) == Last Cycle's Post Read Time : 12:46:34 (43 MB/s) == Last Cycle's Total Time á á : 26:16:19 == == Total Elapsed Time 26:16:19 == == Disk Start Temperature: 22C == == Current Disk Temperature: 25C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sde á/tmp/smart_finish_sde á á á á á á á áATTRIBUTE á NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS á á áRAW_VALUE á á áTemperature_Celsius = á 125 á á 128 á á á á á á0 á á á áok á á á á á25 áNo SMART attributes are FAILING_NOW á0 sectors were pending re-allocation before the start of the preclear. á0 sectors were pending re-allocation after pre-read in cycle 1 of 1. á0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. á0 sectors are pending re-allocation at the end of the preclear, á áthe number of sectors pending re-allocation did not change. á0 sectors had been re-allocated before the start of the preclear. á0 sectors are re-allocated at the end of the preclear, á áthe number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sde == Disk: /dev/sde smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: á á WDC WD20EARS-00MVWB0 Serial Number: á áWD-WMAZA1147650 Firmware Version: 51.0AB51 User Capacity: á á2,000,398,934,016 bytes Device is: á á á áNot in smartctl database [for details use: -P showall] ATA Version is: á 8 ATA Standard is: áExact ATA specification draft version not indicated Local Time is: á áFri Mar 18 18:26:25 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: á(0x80) Offline data collection activity á á á á á á á á á á á á á á á á á á á áwas never started. á á á á á á á á á á á á á á á á á á á áAuto Offline Data Collection: Enabled. Self-test execution status: á á á( á 0) The previous self-test routine completed á á á á á á á á á á á á á á á á á á á áwithout error or no self-test has ever á á á á á á á á á á á á á á á á á á á ábeen run. Total time to complete Offline data collection: á á á á á á á á (36600) seconds. Offline data collection capabilities: á á á á á á á á á á(0x7b) SMART execute Offline immediate. á á á á á á á á á á á á á á á á á á á áAuto Offline data collection on/off support. á á á á á á á á á á á á á á á á á á á áSuspend Offline collection upon new á á á á á á á á á á á á á á á á á á á ácommand. á á á á á á á á á á á á á á á á á á á áOffline surface scan supported. á á á á á á á á á á á á á á á á á á á áSelf-test supported. á á á á á á á á á á á á á á á á á á á áConveyance Self-test supported. á á á á á á á á á á á á á á á á á á á áSelective Self-test supported. SMART capabilities: á á á á á á(0x0003) Saves SMART data before entering á á á á á á á á á á á á á á á á á á á ápower-saving mode. á á á á á á á á á á á á á á á á á á á áSupports SMART auto save timer. Error logging capability: á á á á(0x01) Error logging supported. á á á á á á á á á á á á á á á á á á á áGeneral Purpose Logging supported. Short self-test routine recommended polling time: á á á á( á 2) minutes. Extended self-test routine recommended polling time: á á á á( 255) minutes. Conveyance self-test routine recommended polling time: á á á á( á 5) minutes. SCT capabilities: á á á á á á á(0x3035) SCT Status supported. á á á á á á á á á á á á á á á á á á á áSCT Feature Control supported. á á á á á á á á á á á á á á á á á á á áSCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME á á á á áFLAG á á VALUE WORST THRESH TYPE á á áUPDATED áWHEN_FAILED RAW_VALUE á1 Raw_Read_Error_Rate á á 0x002f á 100 á 253 á 051 á áPre-fail áAlways á á á - á á á 0 á3 Spin_Up_Time á á á á á á0x0027 á 166 á 166 á 021 á áPre-fail áAlways á á á - á á á 6700 á4 Start_Stop_Count á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 18 á5 Reallocated_Sector_Ct á 0x0033 á 200 á 200 á 140 á áPre-fail áAlways á á á - á á á 0 á7 Seek_Error_Rate á á á á 0x002e á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á9 Power_On_Hours á á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 2 á10 Spin_Retry_Count á á á á0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á11 Calibration_Retry_Count 0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á12 Power_Cycle_Count á á á 0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 16 192 Power-Off_Retract_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 15 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 55 194 Temperature_Celsius á á 0x0022 á 128 á 119 á 000 á áOld_age á Always á á á - á á á 22 196 Reallocated_Event_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 197 Current_Pending_Sector á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 198 Offline_Uncorrectable á 0x0030 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 199 UDMA_CRC_Error_Count á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 200 Multi_Zone_Error_Rate á 0x0008 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. á[To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 áSPAN áMIN_LBA áMAX_LBA áCURRENT_TEST_STATUS á á1 á á á á0 á á á á0 áNot_testing á á2 á á á á0 á á á á0 áNot_testing á á3 á á á á0 á á á á0 áNot_testing á á4 á á á á0 á á á á0 áNot_testing á á5 á á á á0 á á á á0 áNot_testing Selective self-test flags (0x0): áAfter scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sde == Disk: /dev/sde smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: á á WDC WD20EARS-00MVWB0 Serial Number: á áWD-WMAZA1147650 Firmware Version: 51.0AB51 User Capacity: á á2,000,398,934,016 bytes Device is: á á á áNot in smartctl database [for details use: -P showall] ATA Version is: á 8 ATA Standard is: áExact ATA specification draft version not indicated Local Time is: á áSat Mar 19 20:42:43 2011 Local time zone must be set--see zic m SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: á(0x84) Offline data collection activity á á á á á á á á á á á á á á á á á á á áwas suspended by an interrupting command from host. á á á á á á á á á á á á á á á á á á á áAuto Offline Data Collection: Enabled. Self-test execution status: á á á( á 0) The previous self-test routine completed á á á á á á á á á á á á á á á á á á á áwithout error or no self-test has ever á á á á á á á á á á á á á á á á á á á ábeen run. Total time to complete Offline data collection: á á á á á á á á (36600) seconds. Offline data collection capabilities: á á á á á á á á á á(0x7b) SMART execute Offline immediate. á á á á á á á á á á á á á á á á á á á áAuto Offline data collection on/off support. á á á á á á á á á á á á á á á á á á á áSuspend Offline collection upon new á á á á á á á á á á á á á á á á á á á ácommand. á á á á á á á á á á á á á á á á á á á áOffline surface scan supported. á á á á á á á á á á á á á á á á á á á áSelf-test supported. á á á á á á á á á á á á á á á á á á á áConveyance Self-test supported. á á á á á á á á á á á á á á á á á á á áSelective Self-test supported. SMART capabilities: á á á á á á(0x0003) Saves SMART data before entering á á á á á á á á á á á á á á á á á á á ápower-saving mode. á á á á á á á á á á á á á á á á á á á áSupports SMART auto save timer. Error logging capability: á á á á(0x01) Error logging supported. á á á á á á á á á á á á á á á á á á á áGeneral Purpose Logging supported. Short self-test routine recommended polling time: á á á á( á 2) minutes. Extended self-test routine recommended polling time: á á á á( 255) minutes. Conveyance self-test routine recommended polling time: á á á á( á 5) minutes. SCT capabilities: á á á á á á á(0x3035) SCT Status supported. á á á á á á á á á á á á á á á á á á á áSCT Feature Control supported. á á á á á á á á á á á á á á á á á á á áSCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME á á á á áFLAG á á VALUE WORST THRESH TYPE á á áUPDATED áWHEN_FAILED RAW_VALUE á1 Raw_Read_Error_Rate á á 0x002f á 200 á 200 á 051 á áPre-fail áAlways á á á - á á á 0 á3 Spin_Up_Time á á á á á á0x0027 á 166 á 166 á 021 á áPre-fail áAlways á á á - á á á 6700 á4 Start_Stop_Count á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 18 á5 Reallocated_Sector_Ct á 0x0033 á 200 á 200 á 140 á áPre-fail áAlways á á á - á á á 0 á7 Seek_Error_Rate á á á á 0x002e á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 á9 Power_On_Hours á á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 28 á10 Spin_Retry_Count á á á á0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á11 Calibration_Retry_Count 0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á12 Power_Cycle_Count á á á 0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 16 192 Power-Off_Retract_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 15 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 56 194 Temperature_Celsius á á 0x0022 á 125 á 119 á 000 á áOld_age á Always á á á - á á á 25 196 Reallocated_Event_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 197 Current_Pending_Sector á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 198 Offline_Uncorrectable á 0x0030 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 199 UDMA_CRC_Error_Count á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 200 Multi_Zone_Error_Rate á 0x0008 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. á[To run self-tests, use: smartctl -t]
-
Just finished Preclearing this drive with the updated preclear.sh can you guys let me know how it looks good or bad thanks.
========================================================================1.3== invoked as: ./preclear_disk.sh -M 4 /dev/sdd
==
== Disk /dev/sdd has been successfully precleared
== with a starting sector of 63
== Ran 1 cycle
==
== Using :Read block size = 8225280 Bytes
== Last Cycle's Pre Read Time : 7:18:51 (75 MB/s)
== Last Cycle's Zeroing time : 6:16:52 (88 MB/s)
== Last Cycle's Post Read Time : 12:53:20 (43 MB/s)
== Last Cycle's Total Time : 26:30:13
==
== Total Elapsed Time 26:30:13
==
== Disk Start Temperature: 25C
==
== Current Disk Temperature: 25C,
==
============================================================================
No SMART attributes are FAILING_NOW
0 sectors were pending re-allocation before the start of the preclear.
0 sectors are pending re-allocation at the end of the preclear,
the number of sectors pending re-allocation did not change.
0 sectors had been re-allocated before the start of the preclear.
0 sectors are re-allocated at the end of the preclear,
the number of sectors re-allocated did not change.
============================================================================
============================================================================
==
== S.M.A.R.T Initial Report for /dev/sdd
==
Disk: /dev/sdd
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA3209988
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Feb 16 21:32:15 2011 Local time zone must be set--see zic m
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 941
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 42
194 Temperature_Celsius 0x0022 125 118 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
============================================================================
==
== S.M.A.R.T Final Report for /dev/sdd
==
Disk: /dev/sdd
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA3209988
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Feb 18 00:02:27 2011 Local time zone must be set--see zic m
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 941
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 32
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 43
194 Temperature_Celsius 0x0022 125 118 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
-
Thank you theyre added but now i cant access the Server throgh windows ; ; only through //tower
-
This is my second drive thank you. new to unraid.
============================================================================
==
== Disk /dev/sdb has been successfully precleared
==
== Ran 1 preclear-disk cycle
==
== Using :Read block size = 8225280 Bytes
== Last Cycle's Pre Read Time : 7:42:28 (72 MB/s)
== Last Cycle's Zeroing time : 7:41:02 (72 MB/s)
== Last Cycle's Post Read Time : 14:07:33 (39 MB/s)
== Last Cycle's Total Time : 29:33:51
==
== Total Elapsed Time 29:33:51
==
== Disk Start Temperature: 20C
==
== Current Disk Temperature: 23C,
==
============================================================================
S.M.A.R.T. error count differences detected after pre-clear
note, some 'raw' values may change, but not be an indication of a problem
19,20c19,20
< Offline data collection status: (0x80) Offline data collection activity
< was never started.
---
> Offline data collection status: (0x84) Offline data collection activity
> was suspended by an interrupting command from host.
54c54
< 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
---
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
58c58
< 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
---
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
63c63
< 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15
---
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 17
67c67
< 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
---
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
============================================================================
============================================================================
==
== S.M.A.R.T Initial Report
==
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA1096534
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 174 174 021 Pre-fail Always - 6275
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
============================================================================
==
== S.M.A.R.T Final Report
==
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA1096534
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 174 174 021 Pre-fail Always - 6275
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 17
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
-
Just finished my first 2TB WDEars and received this email second one about to finish does this one look good?
== Disk /dev/sda has been successfully precleared
==
== Ran 1 preclear-disk cycle
==
== Using :Read block size = 8225280 Bytes
== Last Cycle's Pre Read Time : 7:38:20 (72 MB/s)
== Last Cycle's Zeroing time : 7:37:00 (72 MB/s)
== Last Cycle's Post Read Time : 14:00:03 (39 MB/s)
== Last Cycle's Total Time : 29:16:31
==
== Total Elapsed Time 29:16:31
==
== Disk Start Temperature: 20C
==
== Current Disk Temperature: 24C,
==
============================================================================
S.M.A.R.T. error count differences detected after pre-clear
note, some 'raw' values may change, but not be an indication of a problem
19,20c19,20
< Offline data collection status: (0x80) Offline data collection activity
< was never started.
---
> Offline data collection status: (0x84) Offline data collection activity
> was suspended by an interrupting command from host.
54c54
< 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
---
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
58c58
< 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
---
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
63c63
< 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 12
---
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13
67c67
< 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
---
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
============================================================================
============================================================================
==
== S.M.A.R.T Initial Report
==
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA1096388
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 12
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
============================================================================
==
== S.M.A.R.T Final Report
==
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA1096388
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hard drive temp support.
in General Support
Posted
My home temp is 83F and the supermicro server health says system temp 50C.