Jump to content

hitechnology

Members
 View Profile  See their activity

  • Posts

    32

  • Joined

  • Last visited

 Content Type 

Posts posted by hitechnology

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    After some digging I found this. http://lime-technology.com/forum/index.php?topic=12036.0

     

    A quote from Prostuff1 "DO NOT use this motherboard.  IT has the Atheros Chipset for the onboard NIC which does not play well with unRAID."

     

    Looks like I will need to get another Mobo and I guesses a new processor.

     

    Was hoping to do this UnRaid cheaper than its turning out to be but you have to pay to play sometimes.

     

    Any suggestions guys on something decent that will not to to expensive?

     

     

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    The other new 3TB driuve showed up. I removed the questionable 3TB drive and installed the new one. Tried to run  a preclear and get an error...

     

    BLKRRPART: Input/output error

    Sorry: Device /dev/sdb is not responding to an fdisk -1 /dev/sdb command.

    You might try power-cycling it to see if it will start responding.

     

    I powered down and swapped cables with the working 2TB and it gave me same error.

     

    Also in the unraid main page, in the disk drop down menu it is not showing the correct number of bytes. its showing 4044975.

     

    If I try and run a smart report, I get a error...

     

    Read SMART Data failed: scsi error aborted command

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    Moved to cables from the working 2TB to the questionable 3TB and tried a preclear again.

     

    Failed at the end.

     

    Attached is the screen shot of Putty.

     

    Also the Smart report was not generated other than this message...

    Device Identity failed: Input/output error

     

    A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

    preclear_error.PNG.807b43ed4459cbb8ca1e804c44ff1643.PNG

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    Long story short, I have a new 3TB drive. The other is on its way.

     

    I added the new drive and tried a preclear. LEft it go over night and saw an error in the morning before heading off to work. I didn't screen capture the error and cant remember exactly what it was. Some format error I believe.

     

    When I came home later today, the preclear restarted. and the error was not in the putty screen anymore.

     

    I added the new 3TB as the Parity drive. I get errors like before and get the red ball.

     

    Attached is the sys log and smart report from the 3TB drive.

     

    I am really getting frustrated with this.

     

    Can anyone please shed some light.

     

    Thanks Dave

    smart.txt

    syslog-2-28-14.txt

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    The power supply i am using came from my tower that is a few years old. It was stable the whole time in there. I gutted the tower and used the motherboard, processor, memory and power supply to build this unraid server.

     

    The tower had 4 hard drives and ran great. So i doubt its a power supply issue, but i could be wrong.

     

    These two drives are still returnable to newegg so maybe i should return these and switch over to western digital?

     

    So with these drives in Windows, they work, is it just windows doesn't care about the errors like Unraid does?

     

    What are your thoughts?

     

     

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    Using SeaTools, after I run SMART Check. It says SMART - Pass, then pops an icon that says "Pass Info". Then I click View Log info and all it tells me is what tests I have run. There is no where to view the findings from that test.

     

    I can view the same log by going into help, then view log.

     

    Here is what the Log shows:

    --------------- SeaTools for Windows v1.2.0.10 ---------------

    1/15/2014 5:03:15 PM

    Model: ST3000VN000-1H4167

    Serial Number: Z300SH81

    Firmware Revision: SC43

    Short DST - Started 1/15/2014 5:03:15 PM

    Short DST - Pass 1/15/2014 5:04:18 PM

    Identify - Started 1/15/2014 5:05:05 PM

    Short DST - Started 1/15/2014 5:05:41 PM

    Short DST - Pass 1/15/2014 5:06:44 PM

    SMART - Pass 1/15/2014 5:13:56 PM

    SMART - Pass 1/15/2014 5:15:43 PM

    Bad Hard Drive or Motherboard

    in General Support (V5 and Older)

    Posted

    Using SeaTools, after I run SMART Check. It says SMART - Pass, then pops an icon that says "Pass Info". Then I click View Log info and all it tells me is what tests I have run. There is no where to view the findings from that test.

     

    Here is what the Log shows:

    --------------- SeaTools for Windows v1.2.0.10 ---------------

    1/15/2014 5:03:15 PM

    Model: ST3000VN000-1H4167

    Serial Number: Z300SH81

    Firmware Revision: SC43

    Short DST - Started 1/15/2014 5:03:15 PM

    Short DST - Pass 1/15/2014 5:04:18 PM

    Identify - Started 1/15/2014 5:05:05 PM

    Short DST - Started 1/15/2014 5:05:41 PM

    Short DST - Pass 1/15/2014 5:06:44 PM

    SMART - Pass 1/15/2014 5:13:56 PM

    SMART - Pass 1/15/2014 5:15:43 PM

×
×
  • Create New...