thewired1

Members
  • Posts

    5
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

thewired1's Achievements

Noob

Noob (1/14)

0

Reputation

  1. THAT'S IT!!! It worked! I wasn't starting the array to see the results. The drives ended up being in order and fully working. I was jsut terrified to start the array, thinking that by doing so it would force whatever position I chose to be the new order and possible reformat or somehow destory the existing contents. I was just so very cautious about pressing button without knowing the consequences. Regarding notes; I had orginally stored everything on a separate workstation but well after the initial installation I moved everything to a directory on the unRAID for longterm storage. Silly me... I just didn't consider that if the entire ESXi server went down I wouldn't have access to any of it. Anyways... THANK YOU so very much for helping with this. I am soo relieved.
  2. WHen I assign a drive to device and then click on the device I get the following page (see attached). All three drives are listed as unknown file system type. This is really starting to get me worried!
  3. I don't have any syslogs from the previous installation, but I saved from the current one. I zip'd it for size. SYSLOG.doc.zip
  4. Sorry... I want to be careful and not screw it up; I have 3 drives. The main tab on the web interface has the 4 devices listed (parity, disk1, disk2, and flash). Under the Indentification section I have drop downs for the 3 physical drives. The array is currently stopped and not in mainenance mode. If I select one of the 3 drives for disk1 or disk2, I see the temp and size listed but no frees space listed. Am I doing something wrong or missing a step? I've attached a screenshot of what I'm seeing.
  5. I was running unRAID as an ESXi VM and had a power failure that caused my ESXi and unRAID usb drives to fail. I was able to reinstall both but I am unsure how to identify each of the existing disks from the previous unRAID setup. Each of the 3 drives are showing up in web gui but I don't have the assigned. I don't want to loose the data. What is the best way to get it running again? Thanks in advance!