astartz

The last few weeks my Unraid 6.2 install has been very unstable. I had to replace one disk because sync would fail saying the drive was marked as read only. I did a preclear the new disk checked out of so i rebuilt the array with it. Everything was ok for a day or to until this morning when the system hung. I rebooted the system and now the web interface will not load if i have the new drive attached ( a message about no file system in the syslog) If i remove the new drive the server will boot, but it will not mount the disks. The system just hangs when trying to mount the disks. Attached is the syslog that was run 10 or so minutes into being hung on mounting disks. syslog10.txt

The power supply is a BFG 450 watt. I can get the full model if needed its just hard to read it where the server is right now. I thought it was a higher watt model, i would think 450 is enough for 8 hard drive but i would love for that to be the root cause. Here is the full hardware info for the server from the UI: Model: Custom M/B: Gigabyte Technology Co., Ltd. - P55A-UD4P CPU: Intel® Core™ i7 CPU @ 2933 HVM: Enabled IOMMU: Disabled Cache: 64 kB, 8192 kB Memory: 8192 MB (max. installable capacity 32 GB) Network: eth0: 1000Mb/s - Full Duplex Kernel: Linux 4.1.15-unRAID x86_64 OpenSSL: 1.0.1q Uptime:0 days, 00:51:36 I attached a full diagnostics report. xbmc-diagnostics-20160123-2352.zip

I am running 6.1.7 and for the last week i have had unraid UI keep locking up. Loading a page will take 10 seconds some times and a second later it will never load and just time out. When this happens the Dockers i have running keep working so its just the main UI that has this issue. Unraid also keep reporting bad drives and errors. I have replaced 2 drives due to unraid saying they are bad, once the data rebuild completes everything will work for a hour or so and then unraid sees more drives as bad. I did a clean shutdown, rebooted and now most drives are bad, reboot all are back to working, except for one, that is listed a unmountable. I attached my sys log and i have SMART reports ( 8 drives to many to attach all the logs), does anyone have any ideas on what is happening? Thanks, August syslog.txt