madams2246

I have a 4 disk array (plus a parity disk). I have one drive I am not using and have removed my data from it. I would like to remove that drive but don't want to break the array and want the array to work after I remove that drive. Do we have any instructions on that process? I am running Unraid 6.6.7 Thanks in advance

Thanks in advance! I’ll try that out. Sent from my iPhone using Tapatalk

So, I had a 6.3.5 environment with just just file shares and Plex on it. Can I format my USB drive (after coping off the 6.3.5 files) and install the current version of Unraid on the USB drive and run my Unraid server off of the updated version? Will it pick up all of my shares and drives where I left off? Sent from my iPad using Tapatalk

Turning on my Unraid server and it constantly reboots after the second item in the boot process of "loading BZroot". Any fixes for that issue? My install is 6.3.5.

Rebooted my Unraid server (6.3.5) and only get a prompt on the monitor that says "Boot Error". Any thoughts on how I can fix that? I checked the USB drive it has the normal files on it. I checked the Bios and it is still only pointing the USB drive as the only boot device.

Regarding the ps -a I get the attached screenshot from terminal

I updated my Plex docker this morning like I have done many times in the past. After the update finished the Plex docker completely disappeared from the Unraid GUI. I am running Unraid version 6.3.5

I looked up my motherboard in this build. It is a ASUS P5Q Deluxe. Would that not be supported past Unraid 6.3.5? Mike

Yes, it is stopping and rebooting after the "loading bzroot" I do have the EFI- folder so I will rename that getting rid of "-" The motherboard is older, do all bios have a UEFI mode? What if I don't have that?

Yes, it is stopping and rebooting after the "loading bzroot" I do have the EFI- folder so I will rename that getting rid of "-" The motherboard is older, do all bios have a UEFI mode? What if I don't have that?

I have tried a couple times to upgrade to 6.5.3. I get the download from the Unraid plugins page, it downloads and installs and tells me to reboot. After the reboot the boot process stops at the second step in the OS load and then reboots again. Any tips or guides on this upgrade process to make it work? Thanks in advance. Mike

Johnnie - Thanks that did get me back to 6.3.5. Appreciate the help. I will try and approach on 6.4.1 latter. Mike

At this point the box gets to "OK" on the bzroot and then just reboots the computer over and over. Any suggestions would be greatly appreciate. I would even be happy to just get 6.3.5 loaded again if I can backwards on this flash drive. Again I can zip and upload any files that are needed for review. Mike

Thanks, I went ahead and did that. I backed up the flash drive files first. Copied in the download bz* files and replaced the current files and the os load stopped at the same spot as the screenshot. Would it help if added zip copy of my flash drive to review here? Mike

the bz* files on the flash drive, correct? Mike

Any help would be great. Running Unraid successfully for a couple years. Tried upgrading this morning to 6.4.1 and the box wouldn't come back online. I plugged in a computer monitor the box and see the windows stuck at the screen in the attached image. Basically seems stuck at bzroot. Thanks in advance - Mike

So... wgstarks - you have Duplicati backing up to backblaze b2? Mike

Thanks for info. I am looking for an off site backup location also though, like Crashplan had. Mike

I do see the Crashplan thread but I am still confused. I am currently using Crashplan to backup about 2 TB of data. With that going away does anybody have any easy suggestions that are free or low cost for a new alternative with Crashplan home going away? I was hoping to find something somewhat easy to use also. Thanks in advance, Mike.

Thanks Johnnie, any suggestions on how I run XFS_Repair? Mike

When I boot my unraid server the console screen usually stops at the IP address of my box and a login prompt. Currently after that prompt the screen continues on after the IP with what seems to be some errors. Changes I made before this issue... 1) upgraded to 6.2 yesterday (no issues with update, I was able to access the system after that upgrade) 2) removed needo plex 3) added Linux.io plex 4) remove Linux.io plex due to instability issues 5) tried clearing docker.img troubleshooting the plex issue. 6) made the appdata share public access instead of private. Thank you so much in advance for advice!!! current boot screenshot attached.

I am currently running the docker from Needo but it does not seem like it is currently getting updates. I a considering moving to a new PLEX docker. I would be happy to see some recommendations on which one I should use. Thanks in advance, Mike.

That fixed it, really appreciate the assist. Mike

Thanks for the response but the plugins are up to date already. Any other ideas, am I missing something? Dynamix webGui The Dynamix webGui is the latest iteration of the unRAID Server OS System Management Utility. Built upon Simple Features, it provides real-time screen updates, tabbed viewing and many more enhancements. Bergware 2016.03.05 up-to-date

Any chance someone can provide some advice on fixing this issue. I tried adding a volume mapping in the edit settings and ended up with this. I have no idea how to reverse this or if I need to remove and add the Crashplan docker again. Mike