Hi,
I migrated my home server to unraid 6 during the christmas vacation. Let me say I was trilled with the product, but now I don't know if I will continue with this software, but before I will try the forum for help. I work in an IT company and repair computer or now a day fix the user ....
I know my way around a pc, but linux is not my speciality. Here my spec
Rosewill RSV-L4412 - 4U Rackmount Server Case or Chassis, 12 SATA / SAS Hot-swap Drives
Corsair CX600
ASUS Sabertooth X79
Core I7 3820
Corsair Vengence 8x 4Go 1600mhz DDR3
MegaRAID SAS 9240-8i (flashed in it mode)
12x 3to WD Red WD30EFRX
3x SSD 480 Go (One Sandisk, Two Kingston)
8gb kingston 108 flash drive
Dual Gigabyte Intel pro/1000 nic
900va cyberpower ups
unraid 6.1.9
VM & Docker disable for the moment until a fix is found for my problem
pluggin
Unassigned Devices
Preclear Disks
Powerdown Package (2.20)
Fix Common Problems
Dynamix System Information
Dynamix System Buttons
Dynamix SSD TRIM - nothing configured
Dynamix Schedules - parity check on monday
Dynamix File Integrity - nothing configured
Dynamix Active Streams
Community Applications
The server had many spec, evolving with my problem but this is the final build and my last problem is that I have a drive that report faulty after a week or two in the best of time. See with my log.
- All disk as been pre-clear and tested with wd diag, most of them are brand new.
- The problem appear only on my first and last bay of my case, one onboad one on the lsi card
- The two rack 4x3 are now brand new (http://www.newegg.ca/Product/Product.aspx?Item=N82E16816132037)
- When I swap the disk the problem will appear on the new drive in the same slot of the rack
- What troubling me the most, yesterday I received my new rack to replace the one that was faulty the problem was still present on disk11 (lsi card). I done a new config because I'm out of idea and now the problem is back on my parity drive (on board)
- When I plug the disk directly to the cable no error but I haven't tested more than 2 weeks
- Cable for the onboard sata are brand new, new cable for the lsi are on the way, but now the problem is not on one of my lsi controller port so I don't think it's the cable
- Worked fine for about three weeks in total since the final build
- One of my collegue have the same box and had problem because the cable was too tight together, so I removed all the cable management
- Last week it was up and running I done 3 or 4 parity check to see it I will get an error on a disk all was fine, but in the night of sunday to monday (sheduled parity check) error was found disk11 was faulty.
- Memtest as runned for 5 days without errors
So I'm out of idea, out of focus on this diagnostic since it's been months having problem with it.
With the error I got tonight I will try other onboard sata cable since the 4x3 rack is new.
Thank you for your help.
unserver-smart-20160610-2155.zip
unserver-syslog-20160610-2136.zip