crash987_9

Members
  • Posts

    30
  • Joined

  • Last visited

Posts posted by crash987_9

  1. So to update people on the problems. the usb drive was so badly corrupted that i was getting checksum errors on boot, when it did boot, drives were not in a bool, and drives that were originally reporting fine had errors. I was able to recover the unraid usb drive and everything OS wise is working fine. about the Adaptec 71605, i don't know what i am doing wrong, on system boot i do not get any bios reading from the card. I have also put in a rocket RAID 2720, both cards have a HDD connected to them and i get no readings from them. 

     

    I am running a 4790K on a Gigabyte Z97X-Gaming G1 WIFI-BK running the latest bios update. i have had the rocket raid card working once under unraid on a different system, but the last time i put the card in the same pc, i had no reading from it. I have read online that raid cards need to be setup as UEFI bios boot and not legacy boot in the pc bios/UEFI, correct me if I'm wrong, aren't the cards plug and play or do they really need setting up to work

  2. sorry. HBA card. it is a Adaptec 71605. from what it looks like to start with, supper corrupted unraid drive. just about to see if a windows install can see the drive or not

  3. I am trying to get a pcie vga card and a sata raid card working on my computer. I know the video card is in good working order and the raid card is new, when I boot the computer, bios doesn't detect the raid card but vga card works fine, when booting into unraid, video output is all a mess

     

    Am I looking at faulty pcie lanes or just some type of bios not configured properly 

     

    Thanks

    20220611_201049.jpg

  4. it might be looking like the drive is on its last legs. i tried to recover the old image but i kept receiving an error for the file bzfirmware. did a scan disk and was able to copy it over. ill have to start looking into a replacement drive

  5. I have just updated my server to the new RC3 build, after the reboot it was taking a long time to become available on the network. when i turned on the monitor for the server i am getting a kernel panic. i am getting this with every restart both in normal and safe mode.

     

    hope i am not the first with this problem

    20220315_194953.jpg

  6. so i think i have an odd system setup compared to other users. I have to run my threadripper vm setup to only boot into legacy mode to be able to passthrough the gpu properly to a vm. if i boot the system in uefi mode, i am able to pass the gpu but receive a code 43 error. But if i boot into legacy mode, i cam pass the gpu to the vm and get full use of it. I have a 980TI and 1080TI installed into the system both the vbios for each card passthrough.

     

    I would like to see what other people have setup and to see if maybe my system if just being temperamental 

  7. So i was busy looking on youtube some time ago for things to watch. I then came across this video from Craft Computing on how to make prxomox see a NVidia GTX9xx to the RTX30xx as a NVidia Pascal vgpu. Basically you can split up say a GTX 1080TI with 11GBvram into 11x1GB vram gpu. What i would like to know is, is this at all possible to do in unraid then use parsec to remote into the pc.

     

    I would say watch the video from Craft Computing to get an idea of what i am talking about. it would be great to be able to have 2 or 3 gaming computers all running from the 1 gpu.

    • Like 1
  8. thanks for the tip, i have left the computer with that last night and all is good. i will now stress it and see if it might be something else, i am having a feeling that it is ether a sata controller that's on its way out or it could be a hdd that is making the kernel panic (all hdd pass SMART test)

  9. I did think about doing that, only problem is that when s go ti run a memtest, it loops back to the selection screen (start unraid, start with ui, start in safe mode). Mightbmake a new drive with a working memtest on it

  10. I seem to have a big problem with my server the last month or so. Problems started after getting it back online afte 5 months, it would crash about 5 min in after a cold boot, server was running in dual channel memory during the crash (worked find before). After removing channel 2 of the memory, server was working as normal.

     

    But now, I was doing a well over time computer backup to the server, and get the same crash again, I was able to take some photos of what was on the screen at the time, hope someone is able to help me out

     

    (Photo 1 is of the first crash. Photo 2 and 3 plate from a restart from the first crash)

    20191116_173334.jpg

    20191116_173529.jpg

    20191116_173523.jpg

  11. i seem to be using an old key that has already been replaced with a new one. ill email support about getting a new key. the next problem i have is trying to get all the data back. do i make a new array (new unraid install) and keep the drives the same or do i use an old array setup and replace the 2 drives that are missing (data drive 1 is a new replacement with no data, data drive 4 is a replacement from the old backup and has that data it.

     

    Thanks

  12. My Unraid media server has been down for 4 months due to failed HDD (just get a replacement in it now). when i went to boot the server up from its slumber, i have found that the usb used for unraid has walked of and i have no idea what happened to it. The problem i now have is that i do not have that usb backed up but i have an old config file from some time ago (think about 6.1 days) but when i go to change the key to a new drive, i am getting messages saying that the key is black listed or that it is being used by someone else.

     

    i have tried using data recovery programs to get the info from the drive, but i have 4 drives the same brand, so i have no idea which one had the unraid os on it. Also, is there a file in the congif that i can change the data drives with, the old backup has a drive that has already had a drive replaced  and has that data on it.

     

    Thanks

  13. so not that long ago i had a power outage on the server. i went to bot it up and was getting a black screen on boot, was thinking it needed to be re-downloaded and it would be working agen. I have then plugged the drive into my computer and got the popup box saying that it needed to be formatted, well thats ok as that would be the OS side of unraid, looked in explorer and in disk manager and found out that there is only 1 partition on the drive. 

     

    I do not have a backup of the drive and i am not tempted to reinstall unraid on it as i am hoping to be able to recover it ............. somehow. if anyone knows a good drive recovery program that i can use to get the drive back, that would be good.

     

    All HDD in the server at this stage are ok but not wanting to boot them and loos all 25TB of data

  14. I have just updates my bios on my ASUS ROG ZENITH EXTREME motherboard to Version 1003. when i try to run my gaming VM i keep getting errors on bootup

    IOMMU: 18 is a PCI ethernet 10G card and IOMMU: 20 is my NVME SSD. 

     

    This VM was working before i did the bios update. I have PCIe ACS Override set on and it looks like it is not wanting to turn off (might me a bios thing that is on). Any help would be great

     

    ROG ZENITH EXTREME

    Threadripper 1950x

    128 GB

     

    Capture.PNG.62490c07c2a904fa2d7dcd64c50c1f3c.PNGCapture2.PNG.f1b74467b3c8b6edcfe0da166ac8e211.PNG

  15. i am trying to make a Mac OSX vm computer (like who has the money for the real thing) i have been following the steps from this youtube video, the thing is that when i do a vnc connection to it the screen looks to be squashed.

     

    this is the xml for the vm

    <domain type='kvm' id='32' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
      <name>osx highseirra</name>
      <uuid>2f9aafe0-2fae-6db7-2619-dff7ee01260c</uuid>
      <metadata>
        <vmtemplate xmlns="unraid" name="Linux" icon="linux.png" os="linux"/>
      </metadata>
      <memory unit='KiB'>4194304</memory>
      <currentMemory unit='KiB'>4194304</currentMemory>
      <memoryBacking>
        <nosharepages/>
      </memoryBacking>
      <vcpu placement='static'>8</vcpu>
      <cputune>
        <vcpupin vcpu='0' cpuset='8'/>
        <vcpupin vcpu='1' cpuset='24'/>
        <vcpupin vcpu='2' cpuset='9'/>
        <vcpupin vcpu='3' cpuset='25'/>
        <vcpupin vcpu='4' cpuset='10'/>
        <vcpupin vcpu='5' cpuset='26'/>
        <vcpupin vcpu='6' cpuset='11'/>
        <vcpupin vcpu='7' cpuset='27'/>
      </cputune>
      <resource>
        <partition>/machine</partition>
      </resource>
      <os>
        <type arch='x86_64' machine='pc-q35-2.9'>hvm</type>
        <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
        <nvram>/etc/libvirt/qemu/nvram/2f9aafe0-2fae-6db7-2619-dff7ee01260c_VARS-pure-efi.fd</nvram>
      </os>
      <features>
        <acpi/>
        <apic/>
      </features>
      <cpu mode='host-passthrough' check='none'>
        <topology sockets='1' cores='8' threads='1'/>
      </cpu>
      <clock offset='utc'>
        <timer name='rtc' tickpolicy='catchup'/>
        <timer name='pit' tickpolicy='delay'/>
        <timer name='hpet' present='no'/>
      </clock>
      <on_poweroff>destroy</on_poweroff>
      <on_reboot>restart</on_reboot>
      <on_crash>restart</on_crash>
      <devices>
        <emulator>/usr/local/sbin/qemu</emulator>
        <disk type='file' device='disk'>
          <driver name='qemu' type='raw' cache='writeback'/>
          <source file='/mnt/disk1/os install/mac highsierra.img'/>
          <backingStore/>
          <target dev='hdc' bus='sata'/>
          <boot order='1'/>
          <alias name='sata0-0-2'/>
          <address type='drive' controller='0' bus='0' target='0' unit='2'/>
        </disk>
        <disk type='file' device='disk'>
          <driver name='qemu' type='raw' cache='writeback'/>
          <source file='/mnt/user/os install/osx highseirra/vdisk2.img'/>
          <backingStore/>
          <target dev='hdd' bus='sata'/>
          <alias name='sata0-0-3'/>
          <address type='drive' controller='0' bus='0' target='0' unit='3'/>
        </disk>
        <controller type='usb' index='0' model='ich9-ehci1'>
          <alias name='usb'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci1'>
          <alias name='usb'/>
          <master startport='0'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci2'>
          <alias name='usb'/>
          <master startport='2'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci3'>
          <alias name='usb'/>
          <master startport='4'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
        </controller>
        <controller type='sata' index='0'>
          <alias name='ide'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
        </controller>
        <controller type='pci' index='0' model='pcie-root'>
          <alias name='pcie.0'/>
        </controller>
        <controller type='pci' index='1' model='pcie-root-port'>
          <model name='pcie-root-port'/>
          <target chassis='1' port='0x10'/>
          <alias name='pci.1'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
        </controller>
        <controller type='pci' index='2' model='pcie-root-port'>
          <model name='pcie-root-port'/>
          <target chassis='2' port='0x11'/>
          <alias name='pci.2'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
        </controller>
        <controller type='pci' index='3' model='pcie-root-port'>
          <model name='pcie-root-port'/>
          <target chassis='3' port='0x12'/>
          <alias name='pci.3'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
        </controller>
        <controller type='pci' index='4' model='pcie-root-port'>
          <model name='pcie-root-port'/>
          <target chassis='4' port='0x13'/>
          <alias name='pci.4'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
        </controller>
        <controller type='virtio-serial' index='0'>
          <alias name='virtio-serial0'/>
          <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
        </controller>
        <interface type='bridge'>
          <mac address='52:54:00:48:00:b6'/>
          <source bridge='br0'/>
          <target dev='vnet1'/>
          <model type='e1000-82545em'/>
          <alias name='net0'/>
          <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
        </interface>
        <serial type='pty'>
          <source path='/dev/pts/3'/>
          <target port='0'/>
          <alias name='serial0'/>
        </serial>
        <console type='pty' tty='/dev/pts/3'>
          <source path='/dev/pts/3'/>
          <target type='serial' port='0'/>
          <alias name='serial0'/>
        </console>
        <channel type='unix'>
          <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-32-osx highseirra/org.qemu.guest_agent.0'/>
          <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/>
          <alias name='channel0'/>
          <address type='virtio-serial' controller='0' bus='0' port='1'/>
        </channel>
        <input type='tablet' bus='usb'>
          <alias name='input0'/>
          <address type='usb' bus='0' port='1'/>
        </input>
        <input type='mouse' bus='ps2'>
          <alias name='input1'/>
        </input>
        <input type='keyboard' bus='ps2'>
          <alias name='input2'/>
        </input>
        <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'>
          <listen type='address' address='0.0.0.0'/>
        </graphics>
        <video>
          <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
          <alias name='video0'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
        </video>
        <memballoon model='virtio'>
          <alias name='balloon0'/>
          <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
        </memballoon>
      </devices>
      <seclabel type='dynamic' model='dac' relabel='yes'>
        <label>+0:+100</label>
        <imagelabel>+0:+100</imagelabel>
      </seclabel>
      <qemu:commandline>
        <qemu:arg value='-usb'/>
        <qemu:arg value='-device'/>
        <qemu:arg value='usb-mouse,bus=usb-bus.0'/>
        <qemu:arg value='-device'/>
        <qemu:arg value='usb-kbd,bus=usb-bus.0'/>
        <qemu:arg value='-smbios'/>
        <qemu:arg value='type=2'/>
        <qemu:arg value='-cpu'/>
        <qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,+invtsc,vmware-cpuid-freq=on,'/>
      </qemu:commandline>
    </domain>

     

    if anyone can see were i went wrong then that would be a big life saver

    screen (2).png

  16. Im 90% sure i was runing my my first GPU(980Ti) in passthrough mode fine without ACS on. I was thinking this morning it could be that the linux kernal might not have the driver for the 1080Ti and that is the problem, so i have pluged my 980Ti back in and stll having the same problem. I will try a difforent pci lane as im starting to think the second slot (16x) might be dead now.

     

    If i have the 980Ti in the top pci 16x it seems ti work and the 1080Ti in the second pci 16x slot then it plays up. Unraid is running on the onboard video output so i dont think thats the problem. When i get home ill try ACS agen and see if that works. Hope it is not a dead pci slot

  17. Hi everyone. i am having heaps of problems trying to boot my VM computer after installing a 1080Ti card in my pc. long story short, installed new GPU then the usb drive i was using would not boot,  replaced to s spare usb2 stick and all works good. when i assign the new GPU to the VM i keep getting a popup of "Execution error"

    internal error: process exited while connecting to monitor: 2017-09-25T03:34:02.095343Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev0,bus=pci.0,addr=0x6: vfio: error, group 1 is not viable, please ensure all devices within the iommu_group are bound to their vfio bus driver.
    2017-09-25T03:34:02.095361Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev0,bus=pci.0,addr=0x6: vfio: failed to get group 1
    2017-09-25T03:34:02.095368Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev0,bus=pci.0,addr=0x6: Device initialization failed

    i have put the GPU in the GO file that i found people talking about to somehow allow it to be passed to the VM.

    This is the XML file for the VM

    <domain type='kvm'>
      <name>Windows 10 UEFI</name>
      <uuid>04bc150e-b2b4-88f3-8823-ca5fbecf34b9</uuid>
      <metadata>
        <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/>
      </metadata>
      <memory unit='KiB'>16777216</memory>
      <currentMemory unit='KiB'>16777216</currentMemory>
      <memoryBacking>
        <nosharepages/>
      </memoryBacking>
      <vcpu placement='static'>4</vcpu>
      <cputune>
        <vcpupin vcpu='0' cpuset='0'/>
        <vcpupin vcpu='1' cpuset='1'/>
        <vcpupin vcpu='2' cpuset='4'/>
        <vcpupin vcpu='3' cpuset='5'/>
      </cputune>
      <os>
        <type arch='x86_64' machine='pc-i440fx-2.7'>hvm</type>
        <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
        <nvram>/etc/libvirt/qemu/nvram/04bc150e-b2b4-88f3-8823-ca5fbecf34b9_VARS-pure-efi.fd</nvram>
      </os>
      <features>
        <acpi/>
        <apic/>
        <hyperv>
          <relaxed state='on'/>
          <vapic state='on'/>
          <spinlocks state='on' retries='8191'/>
          <vendor_id state='on' value='none'/>
        </hyperv>
      </features>
      <cpu mode='host-passthrough'>
        <topology sockets='1' cores='2' threads='2'/>
      </cpu>
      <clock offset='localtime'>
        <timer name='hypervclock' present='yes'/>
        <timer name='hpet' present='no'/>
      </clock>
      <on_poweroff>destroy</on_poweroff>
      <on_reboot>restart</on_reboot>
      <on_crash>restart</on_crash>
      <devices>
        <emulator>/usr/local/sbin/qemu</emulator>
        <disk type='file' device='disk'>
          <driver name='qemu' type='raw' cache='writeback'/>
          <source file='/mnt/user/VM HD/Windows 10 UEFI/vdisk1.img'/>
          <target dev='hdc' bus='virtio'/>
          <boot order='1'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
        </disk>
        <disk type='file' device='disk'>
          <driver name='qemu' type='raw' cache='writeback'/>
          <source file='/mnt/user/VM HD/Windows 10 UEFI/vdisk2.img'/>
          <target dev='hdd' bus='virtio'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
        </disk>
        <controller type='usb' index='0' model='nec-xhci'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
        </controller>
        <controller type='pci' index='0' model='pci-root'/>
        <controller type='virtio-serial' index='0'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
        </controller>
        <interface type='bridge'>
          <mac address='52:54:00:93:13:b0'/>
          <source bridge='br1'/>
          <model type='virtio'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
        </interface>
        <serial type='pty'>
          <target port='0'/>
        </serial>
        <console type='pty'>
          <target type='serial' port='0'/>
        </console>
        <channel type='unix'>
          <target type='virtio' name='org.qemu.guest_agent.0'/>
          <address type='virtio-serial' controller='0' bus='0' port='1'/>
        </channel>
        <input type='mouse' bus='ps2'/>
        <input type='keyboard' bus='ps2'/>
        <hostdev mode='subsystem' type='pci' managed='yes'>
          <driver name='vfio'/>
          <source>
            <address domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
          </source>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
        </hostdev>
        <hostdev mode='subsystem' type='pci' managed='yes'>
          <driver name='vfio'/>
          <source>
            <address domain='0x0000' bus='0x03' slot='0x00' function='0x1'/>
          </source>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
        </hostdev>
        <hostdev mode='subsystem' type='usb' managed='no'>
          <source>
            <vendor id='0x1c4f'/>
            <product id='0x0032'/>
          </source>
          <address type='usb' bus='0' port='1'/>
        </hostdev>
        <hostdev mode='subsystem' type='usb' managed='no'>
          <source>
            <vendor id='0x258a'/>
            <product id='0x0005'/>
          </source>
          <address type='usb' bus='0' port='2'/>
        </hostdev>
        <memballoon model='virtio'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
        </memballoon>
      </devices>
    </domain>

    Thanks to advance for the help