[Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array]

On 12/8/2023 at 4:48 PM, dlandon said:

The error code -512 suggests a potential authentication or permission issue during the session setup process. You may want to check the credentials, network connectivity, and permissions for accessing these network locations.

Update: For me the issue was related to me had uninstalled C2 Identity Edge server  and obiviously missed something, becasuse as soon as i reinstalled it, i had no issues with SMB or anything like that.

 

[Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array]

2 hours ago, dlandon said:

The error code -512 suggests a potential authentication or permission issue during the session setup process. You may want to check the credentials, network connectivity, and permissions for accessing these network locations.

Will double check, the weird part is that it worked this morning, and then i did the changes i describe and obviously fucked everything

 

So ye, its obviously a permission issue, i manged to get NFS up and running without problems, but SMB is somehow "broken" atm.

 

 

[Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array]

I need some help.

today I got these problems showing up:

Dec  8 14:16:54 Cereberus kernel: CIFS: VFS: \\192.168.1.122 Send error in SessSetup = -512

Dec  8 14:17:04 Cereberus kernel: CIFS: VFS: \\THE-DISKSTATION Send error in SessSetup = -512

 

This is related i think to the fact that all of a sudden my SMB shares from my Synology Nas dosent mount anymore.

It fails everytime.

 

What i did and have reverted and tried and rebooted was.

On synology i activated: ENABLE SMB 3 Multichanel(by doing this i was forced at the same time to activate:enable asynchrounus read) , I also activated that in Unraid. After this nothing works. 
So i deactivated SMB 3 multichannel on synology and Unraid.

still cant get it to mount.

on my computer i am able to connect to both the ip by  \\192.168.1.122  and browse my shares, or by \\The-something and do the same.

if i through unraid "add smb share" and make it search for servers, it takes quite some time, but finally the synology nas shows up, and i pick it, i then enter username and passord, and i can get it to load the shares and finalyze the guide for that, but when i mount i get this error. 

 

I even tried to create an new user for unraid on the synology.

 

Any suggestions? Its very frustrating, and I am sure its user error, but i cant figure it out 

I am also seeing the green dot: (remote server is online)

 

cereberus-diagnostics-20231208-1516.zip

[zwavejs2mqtt docker container pass Zwave USB dongle]

I am pulling this one from the grave.

when i try to run the command
ls -l /dev/serial/by-id/

I get the following error:

ls: cannot access '/dev/serial/by-id/': No such file or directory
 

I am running this from the terminal in unraid.

There is no directory called Serial.

I see the Aeostick in System hardware.

Bus 001 Device 004 Port 1-6ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB

 

how/what should i do to get this working with this docker?

 

I am running Unraid OS 6.11.5

 

[[SOLVED] Cant start array]

Problem solved, I am a noob and blind.

 

Thanks for making it clear

 

[[SOLVED] Cant start array]

I have ?  look first screenshot

EDIT
I DONT

Thanks

 

[[SOLVED] Cant start array]

Completley new hardware in terms of unraid enviroment, New licens ( basic) 2 disks, 1 2tb "ordinary" hdd, and 1 ssd.

I cant start the array.

I am obivously doing something wrong or missing a step

In the past on another server i used one of my old pro liceneses and it just worked without problems, now that server failed(massive hardware failure a few months ago) and before buying the "basic" license, i tried to apply that license to the new server, but i got "invalid licens", so i bought the basic and applied to the new server.

But i cant get the array to start, 

I tried to start, autostart and so on, but nothing. 

would appreciate help!

 

 

[[Support] Linuxserver.io - Plex Media Server]

6 minutes ago, ramblinreck47 said:

Can you post screen shots of your Docker container?

Have you previously used this card in a VM?

What Nvidia driver version did you install?

What version of Plex are you on?

When you say “dashboard GPU statistics”, do you mean the Nvidia GPU statistics plugin? Have you tried uninstalling it and trying to transcode?

 

 

Latest available (non beta of plex)

 

Nvidia driver:

 v455.38

 

Regardig grp statistics - YES thats the one and yes on reinstall and tried to transcode

 

[[Support] Linuxserver.io - Plex Media Server]

Just now, ramblinreck47 said:

Did you reboot your server after installing the Nvidia drivers?

yes mutiple times, its ovbious that i am failing:)

Also using for the "dashboard" gpu staticstics to see if stuffs happens

 

[[Support] Linuxserver.io - Plex Media Server]

1 hour ago, ramblinreck47 said:

What does your Plex Docker setup look like? Did you input the extra parameters?

I did input this under advanced (extra paramters)

--runtime=nvidia

 

[[Support] Linuxserver.io - Plex Media Server]

So i have a question

since i cant download Nvidia Unraid anymore (as of yesterday i cant find it anywhere do dl, espically not from the community applications), I have issues getting hardware transcoding to work with plex.

 

The setup atm is:
I7 - 4770K 

Nvidia Geforce RTX 2080

and since icant use the Nvidia unriad, i saw that you could dl Beta 35 of 6.9 and also install the "nvidia" driver from CA, (i have done both)

I have ticked the "tick" in plex aswell, I have added GUID for the GPU in the Docker container for plex.

But as far as I can see i punish my CPU and not my GPU.

Any1 have a guide on how to solve this?

[[Plugin] Plex Streams]

So i have a question

since i cant download Nvidia Unraid anymore (as of yesterday i cant find it anywhere do dl, espically not from the community applications), I have issues getting hardware transcoding to work with plex.

 

The setup atm is:
I7 - 4770K 

Nvidia Geforce RTX 2080

and since icant use the Nvidia unriad, i saw that you could dl Beta 35 of 6.9 and also install the "nvidia" driver from CA, (i have done both)

I have ticked the "tick" in plex aswell, I have added GUID for the GPU in the Docker container for plex.

But as far as I can see i punish my CPU and not my GPU.

Any1 have a guide on how to solve this?

[2 Nic´s one Server]

Wow, thanks man, i will look into theese right away!

 

 

[2 Nic´s one Server]

So i am have been googling and trying to find out how to do this.

 

I am running 6.7.2 .

 

I have docker apps running over a nic with VPN, this is great, but i want the Docker plex app to run on the other Nic that is not using the vpn.
I want plex to run on the non-vpn connection so that ican access my media all over the place (even outside network)

i am struggling getting this to work, I am guessing that i am missing MULTIPLE steps I would really like a guid on how to set this up.

What do i need to sort this out? I basically want one of my nics to be dedicated to the plexcontainer.

 

Would really appreciate the help