AgentLame
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by AgentLame
-
-
Hello,
Been using unraid for a few months with a windows VM as my primary computer. I have a Samsung 850 EVO 500GB SSD as a cache drive. When nzbget starts unpacking large nzbs all the other dockers become unresponsive(web interfaces do not load), Windows VM becomes slow, sometimes even the unraid web interface does not load quickly.
I imagine unpacking the large nzbs is reaching the SSD's bottleneck. Is there any solution to this, Can I use a separate SSD to run my Windows VM and other dockers?
-
1
-
-
Hello All,
I played with Unraid before but never really set it up all the way. Decided to spend some time and setup the array with windows VM and gpu passthrough.
However when I go to setting and enable VM's the status of VM manager is Stopped. It does not change to running no matter how many times I disable and enable vm support.
Attached logs. Any help is appreciated.
-
Was the diagnostic made after you started the VM or before? If before, please start the VM and run the diagnostics again.
That makes sense, attached diagnostics zip with the vm running.
-
Have you checked if the keyboard works in unraid console?Yep, works in Unraid GUI mode and console.
-
How did you connect the keyboard? On USB3 ports, only one cable should be connected. On USB2 both cables connected.[\quote]Tried both USB 2 and 3 ports in both 1 and 2 configurations.
-
Have you connected the mouse in the pass-through port? If so, please remove it and try again.When the mouse is connected in Passthrough, mouse works, keyboard doesn't. Same as when it is connected to a separate USB port.
-
Are you running any USB hubs? or connected directly?Connected directly at the back to the 2.0 ports.
-
Please post the output of the below command when connected through ssh to the server. From before starting the VM and after.Before starting the VM:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 007: ID 1b1c:1b37 Corsair Bus 001 Device 002: ID 1532:0043 Razer USA, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
After logging into windows VM:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 009: ID 1b1c:1b37 Corsair Bus 001 Device 002: ID 1532:0043 Razer USA, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
It looks like the Corsair device id is changing after the VM is started.
-
Could you also post your diagnostics? Go to tools --> Diagnostics.
Have you tried changing the USB port?
Hi Saarg, Thanks for looking into this. I have tried different USB ports, the Corsair keyboard comes up in the list of devices to pass through at the VM editing screen, but it doesn't work.
Here are the diagnostics.
-
Logs:
2016-07-07T05:25:07.201024Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] libusb: error [_open_sysfs_attr] open /sys/bus/usb/devices/1-9/bConfigurationValue failed ret=-1 errno=2 2016-07-07T05:26:08.809308Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T05:26:08.809328Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T05:26:08.809335Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] libusb: error [_open_sysfs_attr] open /sys/bus/usb/devices/1-10/bConfigurationValue failed ret=-1 errno=2 2016-07-07T05:27:21.472996Z qemu-system-x86_64: terminating on signal 15 from pid 11621 2016-07-07 05:27:21.520+0000: shutting down 2016-07-07 05:28:00.415+0000: shutting down 2016-07-07 05:28:08.394+0000: shutting down 2016-07-07 05:28:20.721+0000: shutting down 2016-07-07 05:28:39.517+0000: starting up libvirt version: 1.3.1, qemu version: 2.5.1, hostname: Tower LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name 'Windows 10' -S -machine pc-i440fx-2.5,accel=kvm,usb=off,mem-merge=off -cpu host,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff,hv_vendor_id=none -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/5649dd49-0e96-e06c-58f3-12d7462f2292_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 12288 -realtime mlock=on -smp 7,sockets=1,cores=7,threads=1 -uuid 5649dd49-0e96-e06c-58f3-12d7462f2292 -nographic -no-user-config -nodefaults -chardev 'socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-Windows 10/monitor.sock,server,nowait' -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-hpet -no-shutdown -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 -device ich9-usb-uhci2,masndows 10/org.qemu.guest_agent.0,server,nowait' -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 -device vfio-pci,host=01:00.0,id=hostdev0,bus=pci.0,addr=0x5 -device vfio-pci,host=01:00.1,id=hostdev1,bus=pci.0,addr=0x6 -device usb-host,hostbus=1,hostaddr=8,id=hostdev2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on Domain id=6 is tainted: high-privileges Domain id=6 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) 2016-07-07T05:29:57.762051Z qemu-system-x86_64: terminating on signal 15 from pid 11621 2016-07-07 05:29:58.011+0000: shutting down 2016-07-07 05:30:52.687+0000: starting up libvirt version: 1.3.1, qemu version: 2.5.1, hostname: Tower LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name 'Windows 10' -S -machine pc-i440fx-2.5,accel=kvm,usb=off,mem-merge=off -cpu host,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff,hv_vendor_id=none -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/5649dd49-0e96-e06c-58f3-12d7462f2292_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 12288 -realtime mlock=on -smp 7,sockets=1,cores=7,threads=1 -uuid 5649dd49-0e96-e06c-58f3-12d7462f2292 -nographic -no-user-config -nodefaults -chardev 'socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-Windows 10/monitor.sock,server,nowait' -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-hpet -no-shutdown -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 -device ich9-usb-uhci2,masndows 10/org.qemu.guest_agent.0,server,nowait' -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 -device vfio-pci,host=01:00.0,id=hostdev0,bus=pci.0,addr=0x5 -device vfio-pci,host=01:00.1,id=hostdev1,bus=pci.0,addr=0x6 -device usb-host,hostbus=1,hostaddr=8,id=hostdev2 -device usb-host,hostbus=1,hostaddr=9,id=hostdev3 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on Domain id=7 is tainted: high-privileges Domain id=7 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) 2016-07-07T05:31:25.037547Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T05:31:25.037587Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T05:31:25.037594Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/001/009: No such device 2016-07-07T05:40:16.355059Z qemu-system-x86_64: terminating on signal 15 from pid 11621 2016-07-07 05:40:16.662+0000: shutting down 2016-07-07 06:20:11.141+0000: starting up libvirt version: 1.3.1, qemu version: 2.5.1, hostname: Tower LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name 'Windows 10' -S -machine pc-i440fx-2.5,accel=kvm,usb=off,mem-merge=off -cpu host,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff,hv_vendor_id=none -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/5649dd49-0e96-e06c-58f3-12d7462f2292_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 12288 -realtime mlock=on -smp 6,sockets=1,cores=3,threads=2 -uuid 5649dd49-0e96-e06c-58f3-12d7462f2292 -nographic -no-user-config -nodefaults -chardev 'socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-Windows 10/monitor.sock,server,nowait' -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-hpet -no-shutdown -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 -device ich9-usb-uhci2,masndows 10/org.qemu.guest_agent.0,server,nowait' -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 -device vfio-pci,host=01:00.0,id=hostdev0,bus=pci.0,addr=0x5 -device vfio-pci,host=01:00.1,id=hostdev1,bus=pci.0,addr=0x6 -device usb-host,hostbus=1,hostaddr=8,id=hostdev2 -device usb-host,hostbus=1,hostaddr=10,id=hostdev3 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on Domain id=8 is tainted: high-privileges Domain id=8 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) 2016-07-07T06:20:38.408642Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T06:20:38.408708Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] 2016-07-07T06:20:38.408711Z qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE] libusb: error [_open_sysfs_attr] open /sys/bus/usb/devices/1-10/bConfigurationValue failed ret=-1 errno=2 libusb: error [_get_usbfs_fd] File doesn't exist, wait 10 ms and try again libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/001/010: No such file or directory
Thanks.
-
Hello,
So I just bought and setup latest Unraid beta, installed Windows 10 using VNC. I passed through my graphics card and my Razer mouse and Corsair Keyboard, infact I specifically got a different brand keyboard because I heard Unraid has trouble passing through devices with same vendor.
My keyboard lights up but doesn't work. Any help is appreciated.
XML:
<domain type='kvm'> <name>Windows 10</name> <uuid>5649dd49-0e96-e06c-58f3-12d7462f2292</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>12582912</memory> <currentMemory unit='KiB'>12582912</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>7</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> <vcpupin vcpu='4' cpuset='5'/> <vcpupin vcpu='5' cpuset='6'/> <vcpupin vcpu='6' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/5649dd49-0e96-e06c-58f3-12d7462f2292_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor id='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='7' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win10_1511_2_English_x64.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.118-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:84:1e:c5'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='connect'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1532'/> <product id='0x0043'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1b1c'/> <product id='0x1b37'/> </source> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> </domain>
-
I don't want to waste another thread but I have a small question.
I got the Asus Z170 PRO Motherboard. Asus is advertising Realtek ALC1150 motherboard audio. Do I get to take advantage of this within the VM?
Sent from my HTC 10 using Tapatalk
-
Thanks everyone, I should have all the hardware by tomorrow.
I have one more question, I am still on the fence if I should virtualize Windows 10 and go through the hassle of passing USB ports, hotplugging issues but the concept of NAS and gaming in one machine is very attractive.
I guess my question is, I want to do a test run like this:
Boot up Unraid - > Format and Assign a SSD as cache without assigning any other drives -> Install Windows 10 and do everything necessary with and test some games and other applications I need.
Can I do this or do I should I have a precleared drive as a data drive assigned to run the test?
-
My understanding here(correct me if I am wrong) is that Unraid will do the same when adding a new drive to the array but will also take the array offline while doing it. This shouldn't be a problem with new installs right?
I saw this video for setup and initial config. Has anything changed since then?
Any help is appreciated, Thanks.
-
Maybe this is the wrong forum to post. Incase anyone comes looking, here are the parts I decided up on.
CPU - i7 6700k
Mobo - Asus Z170 PRO
PSU - EVGA 850W 80+
Now I need to look for a CPU cooler and a case.
-
Long story short, I purchased an EVGA 1070 on impulse. Now I need to figure out the rest of the components for a gaming Unraid build. I am a novice.
Budget: 800-900 dollars.
CPU: Is i7 6700k a good choice, seems to be very popular among gamers. In conjunction with Unraid is there something else I should look at?
Motherboard: I am looking for a motherboard that can handle 6-8 drives.
Case: Good looking silent case that can fit 8 drives with good airflow.
Power Supply: ?
Thanks.
X570 motherboard recommendations for 5900X and 3080
in Hardware
Posted
Hello,
The one thing that i dont like about my current vm is not being able to use on board usb headers and wasting a pcie slot for usb. I am building a new server with 5900X and RTX 3080.
Looking for good x570 motherboards with good iommu groups and separate usb controllers.
Thanks for the help.