FlyGuy94
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by FlyGuy94
-
-
9 minutes ago, johnnie.black said:
So both have the same serial, tha't not a real serial.
I did pull out the ssd's they do both have thesame number but its not defined as a serial number on the sticker. So that means I'm SOL?
-
1 minute ago, johnnie.black said:
The problem is that both SSDs are identified the same:
Jul 2 19:03:21 NAS kernel: ata5.00: ATA-9: Intenso SSD, 3813450-531609030, O1217A, max UDMA/133 ... Jul 2 19:03:21 NAS kernel: ata6.00: ATA-9: Intenso SSD, 3813450-531609030, O1217A, max UDMA/133This is very unusual, usually the serial number is part of the identification, e.g.
Jul 2 19:03:21 NAS kernel: ata1.00: ATA-8: WDC WD20EURS-63S48Y0, WD-WCAZAA480715, 51.0AB51, max UDMA/133Because of this you can only use one of these as an Unraid server assigned device.
There is no way around it?
-
Tried the drive in my windows pc made a partition it works fine. See picture.
Posted the diagnostics file again too.
-
3 hours ago, itimpi said:
The syslog shows that the system is getting errors reported trying to query /dev/sdo which probably explains why it is not showing up. However I have no idea what is causing the errors.
Its a new drive so it should work but ok I will try it in another system and report back.
-
Just to be absolutely clear of the problem. Here I should be able to select my second ssd "sdo" but I can't.
-
47 minutes ago, itimpi said:
You should post your system diagnostics zip file (obtained via Tools >> Diagnostics). It might also be worth posting a screenshot of the Main tab at the point you are trying to add the SSD.
Hope it helps
-
1 hour ago, testdasi said:
What do you mean by not showing up on the ui?
When the array is stopped You can add cache devices I can add 1 ssd but the second one is not showing up I would post a screenshot but I can't stop the array right now cause of parity check. I started a new config but that also didn't fix it.
-
Already tried swapping cables around no difference. It looks like it just doesn't want to mount. no idea why.
-
I'm trying to upgrade my single 250 ssd cache to dual 500GB. The problem is I can only add one of the 2 drives to the array "sdn".
The other one "sdo" I can see in the terminal using fdisk -l "see attachment". But its not showing up in the webui.
Any idea what could be causing that?
-
37 minutes ago, CHBMB said:
Huh, the client isn't included in the image. Have you searched for the appropriate client you require on the internet?
Or are you referring to the client configs? In which case post the exact URL you're using to try and find them.
Nevermind I had to connect from outside the lan to prompt me to install the client. Now I can connect but I have another problem because I had to change it to bridged to work my ip is now not in my lan range. How do you fix that?
-
I have setup this with spaceinvaders video and some other tips but I can't figure out how to download the premade openvpn connect client. It should appear when you login to the webui but I can't find it in 2.7.4
-
On 9/19/2018 at 9:44 PM, CHBMB said:
Nobody can help unless you provide the information @testdasi has asked for. Only two possibilities that I can see.
1. You haven't deleted the appdata (most likely)
2. Some sort of weird browser caching locally (unlikely)
On 9/17/2018 at 9:52 AM, testdasi said:Please can you upload
- screenshot of your organizr docker template (in Advanced mode, remember to click "Show more settings" to show where your appdata is)
- screenshot of your docker appdata folder.
Its fixed after I rebooted my server I tried again and now get the correct screen. Still no idea why .
-
5 hours ago, testdasi said:
Then you didn't do it right. Did you delete the appdata folder AND the container?
Check your docker set up to see if you have changed the config to some other paths (or perhaps deleted the wrong folder).
Deleting appdata and container is the IT equivalent of burning one's letters. There's no way there's anything left, unless it hasn't been burnt.
I'm sorry thats what I did multiple times. I got that despirate I even deleted my docker.img to no avail. I never get the initial setup screen It always asks me to login.
-
39 minutes ago, saarg said:
Delete the container and the appdata folder. Then reinstall it.
Sounds like you haven't deleted the appdata folder.
I did do that but It still remembers it somehow.
-
How do I reset organizr? I played around with it a while ago and now when I reïnstall it its askes me to log in. I removed the configfolder and the image to no avail. I need to reset it because I don't remember the login from when i tried it out.
-
So how do I change the password to ru torrent there isn't one right now and I can't find a way to change it.
-
So after the latest update to the rutorrent docker everything seems working again so thanks whatever changes were made are working for me. Still need to run some tests but everything seems working again down to the theme I had installed.
-
Looks that way yeah...
So what now? Can I find a more detailed log inside the config directory or the docker image itself?
If there is one it'll be in /config somewhere, I can't recall if there is off the top of my head.
Found this in rutorrent.error.log
2016/11/07 13:04:00 [error] 273#0: *204 FastCGI sent in stderr: "PHP message: PHP Warning: fopen(/config/rutorrent/profiles/settings/uisettings.json): failed to open stream: No such file or directory in /usr/share/webapps/rutorrent/php/getsettings.php on line 7" while reading response header from upstream, client: 192.168.0.15, server: _, request: "POST /php/getsettings.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "192.168.0.10:8520", referrer: "http://192.168.0.10:8520/"
2016/11/07 17:07:11 [error] 264#0: *7 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined offset: 22 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 196
PHP message: PHP Notice: Undefined offset: 23 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 198
PHP message: PHP Notice: Undefined offset: 24 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 193
PHP message: PHP Notice: Undefined offset: 26 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 196
PHP message: PHP Notice: Undefined offset: 27 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 198" while reading response header from upstream, client: 192.168.0.15, server: _, request: "POST /plugins/extratio/action.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "192.168.0.10:8520", referrer: "http://192.168.0.10:8520/"
2016/11/10 13:34:34 [error] 263#0: *9554 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught Error: Call to undefined function mb_strlen() in /usr/share/webapps/rutorrent/plugins/_task/task.php:142
Stack trace:
#0 /usr/share/webapps/rutorrent/plugins/_task/task.php(155): rTask::tail('/config/rutorre...')
#1 /usr/share/webapps/rutorrent/plugins/_task/task.php(210): rTask::processLog('/config/rutorre...', 'log', Array, 0, 0)
#2 /usr/share/webapps/rutorrent/plugins/_task/task.php(280): rTask::check('14787496605823e...')
#3 /usr/share/webapps/rutorrent/plugins/_task/task.php(306): rTaskManager::obtain()
#4 /usr/share/webapps/rutorrent/plugins/_task/init.php(5): rTaskManager::cleanup()
#5 /usr/share/webapps/rutorrent/php/getplugins.php(495): require_once('/usr/share/weba...')
#6 {main}
thrown in /usr/share/webapps/rutorrent/plugins/_task/task.php on line 142" while reading response header from upstream, client: 141.134.238.230, server: _, request: "GET /php/getplugins.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "178.118.50.151:8520", referrer: "http://178.118.50.151:8520/"
2016/11/10 13:36:43 [error] 262#0: *1 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught Error: Call to undefined function mb_strlen() in /usr/share/webapps/rutorrent/plugins/_task/task.php:142
Stack trace:
#0 /usr/share/webapps/rutorrent/plugins/_task/task.php(155): rTask::tail('/config/rutorre...')
#1 /usr/share/webapps/rutorrent/plugins/_task/task.php(210): rTask::processLog('/config/rutorre...', 'log', Array, 0, 0)
#2 /usr/share/webapps/rutorrent/plugins/_task/task.php(280): rTask::check('14787496605823e...')
#3 /usr/share/webapps/rutorrent/plugins/_task/task.php(306): rTaskManager::obtain()
#4 /usr/share/webapps/rutorrent/plugins/_task/init.php(5): rTaskManager::cleanup()
#5 /usr/share/webapps/rutorrent/php/getplugins.php(495): require_once('/usr/share/weba...')
#6 {main}
It keeps repeating thesame thing over and over.
-
Looks that way yeah...
So what now? Can I find a more detailed log inside the config directory or the docker image itself?
-
You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well.
Do I lose my config if I do that? I have alot of torrents that I don't want to lose.
You shouldn't do, provided the torrents aren't stored in the docker image.... (2nd option)
But at the moment it doesn't seem like you have much to lose?
No sorry I backed up my config and tried removing the rutorrent image + removing docker img file. I only redownloaded the rutorrent image but its still the same result. So the problem is somewhere in the config?
-
You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well.
Do I lose my config if I do that? I have alot of torrents that I don't want to lose.
-
Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents?
If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig.
This is what I have but It doesn't say much. Also Sonarr works perfectly with it. It can connect and add and import torrents.
Where have you got the downloads set to within the rutorrent webui setup?
I have it at /data/incoming and /data/complete for finished torrents. Because It needs to be thesame for sonarr to work. But I can't check in the webui because it doesn't load the plugins and I only see the general tab in the settings.
-
Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents?
If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig.
This is what I have but It doesn't say much. Also Sonarr works perfectly with it. It can connect and add and import torrents.
-
Nevermind I was stupid and put in localhost instead of the correct ip.
Can't add second ssd to array
in General Support
Posted
Well I guess these are going in my gaming rig then just my luck. Thanks anyway.