whwunraid

Members
 View Profile  See their activity

  • Posts

    65

  • Joined

  • Last visited

 Content Type 

Posts posted by whwunraid

    New 10G Ethernet, Docker Container Errors

    in General Support

    Posted · Edited by whwunraid

    I Installed a 10G ethernet card in my server and have it up and running.

    I can get to docker web GUIs via internal network as usual, VM can get on internet and resolve DNS names to address.

    Dockers are not able to resolve DNS apparently now as both Emby and Calibre are throwing connection errors to external hosts.

    I have disabled the original 1G nic in Network Settings (or so I thought, see pic).

    Log is showing an error of "Tower root: Fix Common Problems: Error: Multiple NICs on the same IPv4 network".

    Did not think something like this would be an issue if one is disabled? 

    On the Docker settings page the new br0: is not showing a Gateway address, not sure how to rectify this. 

     

    See attached screen shots... thanks in advance for your assistance.

     

    Docker Screen.png

    Log Errors.png

    Network Screen.png

    Network Screen 2.png

    [PLUGIN] Disk Location

    in Plugin Support

    Posted

    Yes I have used "force scan" 3x and have the same issue.  It does spin up the drives and do the scan as it should.  The drop downs just do not function.  I am using Edge browser and have tried in std mode and private mode, makes no difference.

    [PLUGIN] Disk Location

    in Plugin Support

    Posted

    Hello just installed the app and trying to configure, when I choose the TRAYID drop down in the TRAY ALLOCATIONS tab there are no numbers to choose from nor can I type one in.  I do have an add-blocker installed but it is turned off for my unRaid server IP address.

     

    Any help would be appreciated. 

    Disk Swap Question

    in General Support

    Posted

    This would seem simple enough to get around from an OS level if someone wanted to take the time to set it up.

    Maybe a feature request as I am sure this wastes serious amounts of time for many of our users.

     

    Thanks for your help...

     

    PS... The documentation for unRaid would be way more helpful with information like this in the appropriate sections.

    Making the assumption that the documentation makes itself fully transparent to users unfamiliar with the low level details of how a system operates is short sighted.

    Also might make less traffic on the forums. 😉

    Disk Swap Question

    in General Support

    Posted

    Good day all, I swapped a 3TB drive for a 14TG drive in unRaid.

    I followed the instructions in the manual to the letter and everything is proceeding as per that document.

    The question is:  The day before the drive upgrade I moved all the data/share off of the 3TB disk and onto another HDD.

    At this point parity should have known that the data had been moved (or some other indexing system) and when I added in the 14TB drive the rebuild should not have been needed, so why is a rebuild to an empty disk happening?

    Seems a severe waste of my time as I have other config items to do on the server.

    A few just like this, so how can I avoid a rebuild for an empty drive?

    Parity Setup

    in General Support

    Posted

    I have replaced a parity drive and the parity rebuild has started, but it is going extremely slow.

    I have turned off all VMs and Dockers to see if that would help and no positive gains.

    Would appreciate any thoughts you might have.

    Parity.thumb.png.71a8d496c480f1293ec1866a68e9e99d.png

    Share View GUI

    in General Support

    Posted

    Does anyone know of a docker or plugin that would work similar to the Dynamix System Stats but geared at Share information?

    I know you can use the Shares & Main tabs to hunt things down and get info, was hoping for something a little more of a GUI based tree type, at a glance kinda thing.

     

    Thanks...

    Parity Check Stops Dockers

    in General Support

    Posted

    Hello All - I have verified that for the last three months (though issue has been happening for quite awhile) when my monthly parity check finishes all my docker applications enter a stopped state.  I looked in the log file to see what is up, but I do not see the parity check being written in the log.

    It has a monthly schedule now I have seen instances of the CA App BU stopping docker but that is not happening here as I tested that with a daily BU and all is well there.

     

    As to the log for the parity check, is it written elsewhere or just not at all?

     

    Thanks...

    Drive Swap - Size

    in General Support

    Posted

    SMART errors, and the drives were refurb's - have a few others that have worked for years but apparently these did not.

    I moved the drives around in the cage to 3 different slots, no luck.

    After the error unRaid would kick the drive back to the unassigned devices location and show error/unmountable.

     

    So if you ever have an urge to buy from Water Panther, be cautious.

    I'm sure they are just a labeler, but who knows where they get their drives.

    Will stick with HGST & Seagate.

     

    Drive Swap - Size

    in General Support

    Posted

    I had a 14TB drive (new, no data, just formatted and mounted) go bad and removed from system for refund.

    I would like to replace it with a 10TB drive I have, but I notice the manual says not to go smaller.

    I did not know in this case if it would matter as the drive did not store data?

     

    Thanks....

    Using “new config” tool

    in General Support

    Posted

    I have a similar issue when I read the help clip.

    I assigned a SSD (mistakenly) as a data drive and now need to remove it, thus leaving the slot open for a future drive.

    I assume same process applies, unassign the drive, do the New Config and Preserve option?

    Then rerun parity?

    Is a restart needed, or other steps?

    Will shares and data remain intact?

    New Server & Boot Drive

    in General Support

    Posted

    I have built a new server and before I get to far in the configuration...

    I was wanting to get the new one configured while keeping my old server online (that has the valid USB key), and then just copy the temp USB (new server) over to the current registered one (over-writing the old config) and apply the license key in the GUI.

     

    Is this a valid way to go...?