bmoney
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by bmoney
-
-
Great app....I have been using it for sometime, but wanted to know if one could add the option of specifying a Ultra HD-DVD and/or BluRay drive(s)?
As shown below, I run a 4224 Norco with a 2106 stacked on top...the two drives on the far right of the 2106 are a Bluray and HD-DVD drive.
Would be great to be able to add the optical drives and also adjust the schematic to match the picture?
Thanks!
Bmoney
-
Hi,
I am running preclear 1.9 w/unraid pro 4.7, just finished preclearing a WD20EARS drive (unjumpered w/4k Alignment) after ~40 hours. Very slow inital drive rates ~14MB/sec, but seemed to pickup near the end...
Results are below:
========================================================================1.9
== invoked as: ./preclear_disk.sh /dev/sde
== WDC WD20EARS-00MVWB0 WD-WMAZA0976314
== Disk /dev/sde has been successfully precleared
== with a starting sector of 64
== Ran 1 cycle
==
== Using :Read block size = 8225280 Bytes
== Last Cycle's Pre Read Time : 20:19:18 (27 MB/s)
== Last Cycle's Zeroing time : 6:16:53 (88 MB/s)
== Last Cycle's Post Read Time : 13:31:10 (41 MB/s)
== Last Cycle's Total Time : 40:09:32
==
== Total Elapsed Time 40:09:32
==
== Disk Start Temperature: 26C
==
== Current Disk Temperature: 26C,
==
============================================================================
** Changed attributes in files: /tmp/smart_start_sde /tmp/smart_finish_sde
ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE
Raw_Read_Error_Rate = 195 200 51 ok 738
Reallocated_Sector_Ct = 194 200 140 ok 118
Seek_Error_Rate = 200 1 0 ok 0
Reallocated_Event_Count = 198 200 0 ok 2
No SMART attributes are FAILING_NOW
0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
33 sectors are pending re-allocation at the end of the preclear,
a change of 33 in the number of sectors pending re-allocation.
0 sectors had been re-allocated before the start of the preclear.
118 sectors are re-allocated at the end of the preclear,
a change of 118 in the number of sectors re-allocated.
============================================================================
Should I RMA the drive? or re-run preclear? Not sure what the results are telling me.....but the re-allocation is worrying me...
Thanks.
-B
Case icon requests
in User Customizations
Posted · Edited by bmoney
Was wondering if you could add a Norco RPC-2106? I run this unit stacked on top of a Norco-4224...
Possible to draw this double stacked configuration?
Many thanks
Bmoney