willis

Members
  • Posts

    16
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

willis's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Yeah but it is strange that i have so many errors in disks. Now i have to return another one, the WD Disks are running like a charm and had never any problems with those disks.
  2. smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.30-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Archive HDD Device Model: ST8000AS0002-1NA17Z Serial Number: Z840PX0K LU WWN Device Id: 5 000c50 0927261d8 Firmware Version: AR17 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 24 07:49:09 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 942) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 118814504 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 22 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 056 055 030 Pre-fail Always - 1516262572060 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5779 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 22 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 071 058 045 Old_age Always - 29 (Min/Max 27/29) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 095 095 000 Old_age Always - 11770 193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 24626 194 Temperature_Celsius 0x0022 029 042 000 Old_age Always - 29 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 117 099 000 Old_age Always - 118814504 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 12 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3260 (6 125 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 36254910880 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 339594453127 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 4242 hours (176 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 15d+07:00:37.069 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.059 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.046 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.037 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.036 READ FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 3745 hours (156 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 31d+07:15:46.331 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.330 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.330 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.329 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.328 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 80% 5779 3747684768 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3. No as I said after replacing a broken 2nd Parity disk, a different 8TB Seagate was in error state (while rebuilding the 2nd parity disk).
  4. So after a couple of broken (or not) disks again (all replaced under warranty by seagate) I thought why not continue this thread. Today added my replaced 2nd parity disk and when rebuilding that parity disk another disk had the error status, here is the smart test: (short, the long version is still running) ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 4242 hours (176 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 15d+07:00:37.069 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.059 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.046 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.037 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 15d+07:00:37.036 READ FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 3745 hours (156 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 31d+07:15:46.331 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.330 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.330 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.329 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 31d+07:15:46.328 READ FPDMA QUEUED
  5. Well I tried openflixr but I have a strange problem that doesn't seem to be a openflixr problem. I have strange speed problems when downloading. I hit a 20MB/sec limit with the VM but copying a file from a nfs share goes with 50-60MB/sec. So the speed in the machine is there. But when downloading the exact same NZB file on my unraid sabnzbd Docker speeds are around 55-60MB/sec (500mbit/up/down(fiber)) Is there somebody who maybe can explain this? I think the network copy speed also can be much higher. These are my specs of the Unraid build: Mainboard: Asus B150M PRO GAMING Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz DIMM DDR4 Synchronous 2133 MHz (0.5 ns) (corsair) (32GB) LSI 9211-8i LSI00194 8 port 6GB/s PCI-Express controller 3x Samsung SSD 850 Evo 500GB for Cache 5x Seagate Archive 8TB (ST800AS0002) (2 for Parity) 2x 8tb WD Red (data) 2x 4TB WD Red (data) 1x 4TB Seagate (data)
  6. And here is the output of the Extended test, still everything is ok at this moment. the new WD Disk does its job well. smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.30-unRAID] (local build) Copyright © 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Archive HDD Device Model: ST8000AS0002-1NA17Z Serial Number: Z840PHNF LU WWN Device Id: 5 000c50 0925478dd Firmware Version: AR17 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 3 19:26:46 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 945) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 198727088 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 4460112493 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1007 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 15 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 061 052 045 Old_age Always - 39 (Min/Max 21/43) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 268 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 402 194 Temperature_Celsius 0x0022 039 048 000 Old_age Always - 39 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 118 099 000 Old_age Always - 198727088 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 962 (18 143 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 112011471096 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 199789103661 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1005 - # 2 Short offline Completed without error 00% 975 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
  7. thats already running but the short test also took a while, will post it when ready
  8. thanks for the tip, i will look into that. It could be so simple but i think it is strange that the same disks have this problem, my 2 8TB WD reds never had any problems (thus far). In the Seagate disks thread i uploaded the result of the smart test, this is for 1 of the 2 disks that were disabled...
  9. Here is the SMART Report for the disk, i just received word from Seagate that the disk that i already send was indeed broken en they just send me a new one. Here is the smart data for the disk (2of2) that i didn't send to seagate (will do it if it fails again). smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.30-unRAID] (local build) Copyright © 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Archive HDD Device Model: ST8000AS0002-1NA17Z Serial Number: Z840PHNF LU WWN Device Id: 5 000c50 0925478dd Firmware Version: AR17 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Dec 2 12:57:26 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 945) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 153884704 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 4452444632 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 977 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 15 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 061 052 045 Old_age Always - 39 (Min/Max 21/43) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 266 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 400 194 Temperature_Celsius 0x0022 039 048 000 Old_age Always - 39 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 117 099 000 Old_age Always - 153884704 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 932 (48 171 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 109234797504 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 198835488429 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 975 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. If de disk fails again, i will post the errors i receive maybe that explains it a little bit better.
  10. I'd put money on there being nothing at all wrong with either disk, and it's actually a bad SATA cable or power cable. That was what i was thinking, but i replaced the Sata cables (also the complete psu (now have a corsair 550) and also (after that didn't work) changed from the sata controller to the onboard sata controller. both the same result (disabled disk after sector errors). Did you replace the SATA cable with a high-quality locking cable? Also, with 9 disks 550w SHOULD be enough, but is this one of Corsair's better power supplies or the low-end CX series? If your 3rd disk has this same issue, I'd replace the power supply with a higher quality unit that also has a bit more capacity (650w would be PLENTY). Meanwhile, I have to agree with your earlier conclusion ... The Corsair is a RMX550, the one with the modulair cables. I didn't replace it with a high quality cable, i have a set of sata cables (same for all the other disks) I don't have any smart status at this moment because i wanted to get a new disk asap, however i had an error in the log. That error i googled (i don't have the error available to me right now) that suggested that the disk was really broken.
  11. I have no real evidence or at least proven evidence. But the following was done: Changed the PSU (already wanted a more powerfull one (corsair rmx550). So that solves the whole powercable thing. And tried to move the disk from the lsi logic controller to the onboard controller (thus also used another sata cable, because the lsi uses sas cables). But all of this results in the same error. So no real prove, but i think that the things i did for at least 80% would sum things out. I still could have used the Seagate software on another PC, but i didn't do that because i was done with the problems returning and being afraid for my data.
  12. I'd put money on there being nothing at all wrong with either disk, and it's actually a bad SATA cable or power cable. That was what i was thinking, but i replaced the Sata cables (also the complete psu (now have a corsair 550) and also (after that didn't work) changed from the sata controller to the onboard sata controller. both the same result (disabled disk after sector errors).
  13. So after a few posts i think it is time to Introduce myself and my build. I am a new Unraid user for about 2 months now, enjoying the software very much (the disks i use a littlebit less, but that will be resolved quickly i hope). My Build: - Fractal Design Node 804 - Intel i5 (1151 - 6600K) - 64GB DDR4 - MSI Motherboard - LSI Logic SAS9211 controller (flashed in IT Mode) Disks: 3x Samsung EVO 850 500GB Cache disks (750GB usable) 4x 8TB Seagate ST8000AS0002 (2 parity 2 data disks) 2x 8TB Western Digital 8TB (third one on the way) 2x 4TB Seagate 1x 4TB WD Red Total 36TB Storage usable (for now) I Run a couple of Docker applications: - Plex Media server (plexpass) - Couchpotato - Sonarr - Plex Request.net - PlexPy - SabNZBD - CAdvisor - Docker monitoring And Run 2 Server 2016 VM's (1 ActiveDirectory and 1 Delivery controller for my XenApp test environment) Why i am not completely happy with the disks is that the Seagate 8TB Disks already are broken for 2 of the 4 drives, 1 is returned for RMA, i will wait when this one gets back and then will send the other one). For now i ordered a 8TB WD Red disk to replace one of the Seagate Disks. Pictures will be added
  14. So i have 4 of these disks in my setup (4x 8TB Seagate ST8000AS0002) 2x 8TB WD Red disks and 3x 4TB (seagate and wd). But from the first week of my Build (now 2 months old) there were some problems with disk1 in my Array (the 8TB Seagate disk). Disk was disabled and many sector errors. So i RMA'd the disk and ordered a new one (was on my wishlist) and replaced the broken disk with the new ordered disk. All was well for a couple of days, and then Disk1 was broken again, remember that this was the replaced new disk). Same happening sector errors so the drive was disabled. Re-added the disk and parity was calculated an restored the disk. Offcourse the problem was returning after a few days. So the status this moment is, send that broken disk to Seagate, ordered a 8TB WD disk to replace it. the replaced Seagate disk will be added later. So you can say my luck with these disks is not joyfull at this moment...
  15. Ok thank you very much, it isn't bad, but i don't want it to be anything wrong in the system. So this is explainable, so no problem!