Jump to content

mrangryoven

Members
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

 Content Type 

Posts posted by mrangryoven

    [Plug-In] Community Applications

    in Plugin Support

    Posted

    14 minutes ago, trurl said:

     

    Cache drive filling up is also not correct. You should never allow a drive to get too full, and there are settings you can make to prevent this.

    I know, i took a look at it but couldnt work it out. It only says its full after a reboot. after about 3 hours it then recalculates and goes back down to 50% which is where its at. 

    Its like my docker image duplicates itself temporarily on a reboot? But thats for another post at some point.

    [Plug-In] Community Applications

    in Plugin Support

    Posted

    1 minute ago, Squid said:

    The log is full and you haven't rebooted is the key. There's something wrong with the server and that has to be addressed first.

    The log filling up to 100% in a month plus is nowhere near correct

    I did have a look, i believe it was just because my cache drive was full for a few hours and it logged every second of it being full... I will reboot the server tomorrow and see what happens...

    [Plug-In] Community Applications

    in Plugin Support

    Posted

    Anyone able to help me here?

     

    I haven't been able to install community applications since unRAID 6.5 came out.

    Here is what it shows when I install it: 0cda7a00d9.png.

    I can send you my log but it wont be very helpful as its full as of March 15th and I havent rebooted the server to clear it...

     

    Any ideas?

     

    Weird docker container behaviour when updating (unRAID 6.4.1)

    in General Support

    Posted

    So im getting this weird issue after updating to 6.4.1 where everytime i update my docker containers, i have to then go Add Container > My Templates and select the container i just updated and re-add it.

     

    In the little notification bubble at the top, it says  

    Feb 17 19:52:06 SN-MS01 [23975]: The command failed. Error: sh: /usr/local/emhttp/usr/bin/docker: No such file or directory<br>

    This is after EVERY container update.

    No settings on my server have changed.

     

    Just after updating to 6.4.1

    [Support] Linuxserver.io - SWAG - Secure Web Application Gateway (Nginx/PHP/Certbot/Fail2ban)

    in Docker Containers

    Posted · Edited by mrangryoven

    3 hours ago, riffles21 said:

     

    I have exactly the same issue. It was running fine last week and now all of a sudden it stopped working.

     

    Maybe it has something to do with this: https://community.letsencrypt.org/t/2018-01-09-issue-with-tls-sni-01-and-shared-hosting-infrastructure/49996

     

    Edit: solved the problem, thanks @CHBMB. Set HTTPVAL to 'true' and forwarded external port 80 to internal 81.

     

    image.thumb.png.9d4cf5c49e54d089280165782a8fae5e.png

     

    @riffles21 where is this HTTPVAL? I cant find it?

     

    Edit: ignore me. Found it.

    [Support] Linuxserver.io - SWAG - Secure Web Application Gateway (Nginx/PHP/Certbot/Fail2ban)

    in Docker Containers

    Posted

    My letsencrypt docker is not working. Re-installed multiple times with no success, settings are as they were pre unRAID 6.4.0 update.

      

    Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.
Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.
ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container

    This is what im getting at the moment. Im using duckdns.org as my domain and subdomain as my duck dns name.

    Port 81 for the docker and was using 443 but i have entered 443 manually in the box as it was staying grey on the docker page.

     

    Here is my run command

    031eec3419.png

     

    I have changed the port in the unraid Settings > Identification > SSL for HTTPS to 442 and applied, this is also not helping!

     

    Any ideas? I see i am not alone with my issues.

     

    PS, this is a repost. i deleted my previous one and added this run command.

    Can't use letsencrypt docker after 6.4.0 update

    in General Support

    Posted

    14 minutes ago, Codeh said:

    What does the docker log say? 

    Obtaining a new certificate
Performing the following challenges:
Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.
Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.
ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container

    This is the error that im getting, it says cert does not exist? It hasnt tried to create it yet.

    Can't use letsencrypt docker after 6.4.0 update

    in General Support

    Posted

    My Letsencrypt docker isnt working after the new OS update. I have removed it and re-added it and got it to start up but it wont generate the certificate.

    All my settings are the same as previous however ive had to set the port 80 to 81 and 443 to 444 as unraid now uses Nginx so i assume these have been taken already as it wasnt mapping them natively.

     

    Any help is appreciated, i need this docker working asap!

     

    Thanks,

    Weird docker image size issue

    in General Support

    Posted

    Just updated to 6.4.0 and before reboot my docker image was 20gb. After reboot its now 200GB? Nearly filled my 500GB SSD cache drive?

    Is this normal?

     

    I have noticed this a couple of times after a reboot that my cache drive fills up more than it normally would, but it has never 90% filled my cache drive!

     

    Any help would be appreciated.

    Cant access web interface

    in General Support

    Posted

    I wanted to try out unRAID however im having great difficulty even starting, i have booted to the USB in my server and it has got to the login terminal screen, as per the manual i then tried to navigate to "http://tower" as asked. However, that isnt working. I then tried to navigate to its local IP Address (in my case 192.168.87.204) heres a screen shot just to clarify

     

    https://puu.sh/sxc2N/35f7d6eaa7.png

     

    I thought it might be because i have multiple ethernet cables plugged into the server so i unplugged them all apart from one, in my case eth3. I then rebooted to the USB and then tried again, but this still didnt work. so im kinda stumped.

     

    Just to check that the IP Address was correct, i logged into "root" on the terminal and did ifconfig eth3 but it doesnt seem to show an IP address which is really weird, even with the ip addr show eth3, it still doesnt give me a normal IP address.

     

    I will mention now that im using an IPv6 enabled LAN, however obviously IPv4 is also used...

     

    Also, im not very good at linux so can someone explain to me how i get the log file off? :)

     

    Thanks.

     

×
×
  • Create New...