Nitsuj
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Nitsuj
-
-
Hello all.
i’m hoping you all can help. I’m trying to have certain docker containers use a vpn to connect to the internet while still being accessible via the web ui and work with other containers. All are on the same server.
unraid access and Plex are on eth0 and eth1 in failover. I have a 4 nic card installed in the server along with the on board 1gbe (eth0) and a 10gbe sfp+ card (eth1).
installed dockers: Plex, Jellyfin, NordVPN, Xteve, others.
Below is what I am trying to do.
Xteve to use nord vpn to access internet but still have the webui work and have it function with Jellyfin and Plex.
i have a few containers I would like to do like the above. All the information and guides I follow lead me to no success. As soon as I enable, either the container does not start, or the web UI disappears or it’s unable to be accessed or function at all.
i also have a séparer router with NordVPN on it I can add it if it would help.
Any help is appreciated.
-
hello everyone. sorry for the delay...life happenned.
So to continue. if i turn off bonding i can see and connect to the tower. if i turn on bonding, i loose the connection. any ideas? i never had issues before this update
-
I have changed the name of the server as requested. As for accessing the shares, i have tried on a win 7, 8.1 and 10, as well as an imac and mac min. cant access them any way or how. Plex plays the shares and seems to run.
i will try your suggestion about redoing the network set up.
thanks again
-
anything else i can try to fix this
-
ok, still unable to access tower over ip/network.
plex now shows error shaka 9009
on every fileonl;y when i play them on the server. all other apps seem ok. i will check more of my media.im lost
help superstars!
-
ok i changed the name still no success
-
also, since i upgraded to 6.5 my shares no longer auto mount...
-
just curiouys, why is this an issue now? i have had that server name for over 2 years now? ill try it but am lost as to why
-
-
Hello, i am unsure where the "Ned Help" sticky is.
-
Hello, thx for the replies. I updated from 6.5.1 to 6.5.2. The computer has an ip address. can ping and can access stuff on the server (plex, ect...) i am unable to access from any computer via name, ip or network. Im at a loss. I followed all Limeteck instructions.
-
yes it receives an ip address, i can surf the net and speed test. but no access to tower from another computer nor is it visible in network
-
yes i updated from 6.5.0 to 6.5.1 to 6.5.2
on all the other servers it worked.
on one i can no longer aqccess it via network or ip
-
Hello all. Since upgrading to 6.5.2 one of my servers is no longer showing in network, nor am i able to access it via tower or ip address.
Another server i have, i did the update on and no issues.
Im a t a loss here. i followed the other guides. Im not sure whats going on.
Any help would be appreciated.
-
Hello all. Since upgrading to 6.5.2 one of my servers is no longer showing in network, nor am i able to access it via tower or ip address.
Another server i have, i did the update on and no issues.
Im a t a loss here. i followed the other guides. Im not sure whats going on.
-
hello all,
last night i upgraded UNRAID to 6.5.2...big mistake...since then nothing but issues.
Plex is my biggest concenr. nothing seems to work. if i manage to get the container installed it either cannot find my server...or if it does live tv and other stuff not working.
please in need of help
-
All good...i added a share and boom voila!
-
Hello all...im a newbie to unraid and linux...plz keep that in mind.
i would like to add the web tools and unsupported app store to my plex server. for life of me no matter what i do i cant find where or how exactly to put the folder in the pluggins folder.
i tried with my desk pc and on the server direct...please help
-
Hello. today i ugrade unraid to 6.3.5. after reboot, owncloud web ui..."downgrading is not supported..." what do i do to fix this. i have uninstalled the app and reinstalled. on docker. i hope my filles are ok...please HELP!!!
-
Hey all GOOD NEWS
PROBLEM SOLVED
turns out unraid by default has dhcp set to no in the network config file
changed settings and boom
thx for everyones help
what an AWESOME comunity
-
1
-
-
i saw this and thought
# Generated settings:
IFNAME[0]="br0"
BONDNAME[0]="bond0"
BONDING_MIIMON[0]="100"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BONDING_MODE[0]="1"
BONDNICS[0]="eth0 eth1"
BRNICS[0]="bond0"
DESCRIPTION[0]=""
USE_DHCP[0]="no"
IPADDR[0]="192.168.1.5"
NETMASK[0]="255.255.0.0"
GATEWAY="192.168.0.2"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="24.226.10.194"
DNS_SERVER2="24.226.10.193"
DNS_SERVER3="24.226.1.93"
MTU[0]=""
SYSNICS="1"
-
still dont see it in here
my unraid server (EvilMonkeyBrain) not there or in network
-
i saw the WORKGROUP thing i tried that already
i downloaded and ran lan sweep
here is what it says...it say that evilmonkey dc is master...thats odd cause thats not a comp its a ap
-
ok did all that. still not showing up
do i start up array again?
NextCloud Swag Fatal PHP error.
in General Support
Posted
Hello community!
I recently followed a space Invader Ones new NextCloud guide for outside accessb using Swag. Since then I get the below error and there is no access to the webui.
Your support is appreciated.
PHP Fatal error: Uncaught Error: Call to a member function getLogger() on null in /config/www/nextcloud/cron.php
It tells me line 189. When I check I am not sure what I am missing.