Jump to content

mspencerl87

Members
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

 Content Type 

Posts posted by mspencerl87

    [Support] Djoss - Nginx Proxy Manager

    in Docker Containers

    Posted · Edited by mspencerl87

    First, Thanks for this wonderful application. Its very simple and clean. If i could get it to work I would be very happy :D .

     

    I want to start off saying i'm having issues, and i'm not sure what to troubleshoot.

    Issue: browsing to domains i get "502 Bad Gateway nginx"

     

    Setup:
    DuckDNS - Domains, filegardenspeed, spencer-webserver, 

    NGINX Proxy Manager - Bridged

     

    Containers:

    Webserver - spencer-webserver.duckdns.org 

    Speedtest - filegardenspeed.duckdns.org

     

    Router: Pfsense

    Forward Port 443 to 18443 (Nat+Proxy)

    Forward Port 80 to 1880 (Nat+Proxy)

     

    error.log

    https://pastebin.com/raw/qZJRh1AK

     

    ProxyManager Settings

    https://imgur.com/uV377VS

    https://imgur.com/NRw8ES5

     

    Any advice is helpful

     

    Update: If i change the proxy host from hostname to bridged IP : 172.17.0.7:80 the page loads. Which is fine..

    But i'd then have to set it statically?

    This seems like a docker issue with DNS resolution?

    I have the exact same problem when using letsencrypt container, but idk how to fix..

    Dynamix system temp, fan auto control - Won't detect drivers

    in General Support

    Posted

    Anything i can do?

    See reddit post.

    Is this a Kernel issue, Mobo issue, or Ryzen issue?

    See below, how can i generate drivers.conf?


    Added 'modprob nct6775 0xd352 to go file.

    added sensors.conf to plugin folder

    #sensors
    chip "k10temp-pci-00c3"

        label temp1 "MB Temp"
        label temp2 "CPU Temp"

     

     

     

    i ran sensors-detect and got

    Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes

    Found unknown chip with ID 0xd352

     

    Then ran "sensors"

    and got:

    modprobe nct6775 0xd352^C

    and got

    k10temp-pci-00c3

    Adapter: PCI adapter

    Tdie: +47.4°C (high = +70.0°C)

    Tctl: +57.4°C

     

    nct6795-isa-0a20

    Adapter: ISA adapter

    Vcore: +1.42 V (min = +0.00 V, max = +1.74 V)

    in1: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM

    AVCC: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM

    +3.3V: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM

    in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM

    in5: +0.15 V (min = +0.00 V, max = +0.00 V) ALARM

    in6: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

    3VSB: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM

    Vbat: +3.25 V (min = +0.00 V, max = +0.00 V) ALARM

    in9: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM

    in10: +0.00 V (min = +0.00 V, max = +0.00 V)

    in11: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

    in12: +1.16 V (min = +0.00 V, max = +0.00 V) ALARM

    in13: +0.68 V (min = +0.00 V, max = +0.00 V) ALARM

    in14: +1.51 V (min = +0.00 V, max = +0.00 V) ALARM

    fan1: 0 RPM (min = 0 RPM)

    fan2: 2428 RPM (min = 0 RPM)

    fan3: 1165 RPM (min = 0 RPM)

    fan4: 830 RPM (min = 0 RPM)

    fan5: 836 RPM (min = 0 RPM)

    fan6: 849 RPM (min = 0 RPM)

    SYSTIN: +33.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = CPU diode

    CPUTIN: +39.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

    AUXTIN0: +41.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

    AUXTIN1: -128.0°C sensor = thermistor

    AUXTIN2: +40.0°C sensor = thermistor

    AUXTIN3: -1.0°C sensor = thermistor

    SMBUSMASTER 0: +57.5°C

    PCH_CHIP_CPU_MAX_TEMP: +0.0°C

    PCH_CHIP_TEMP: +0.0°C

    PCH_CPU_TEMP: +0.0°C

    intrusion0: ALARM

    intrusion1: ALARM

    beep_enable: disabled

×
×
  • Create New...