nicecube
-
Posts
98 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by nicecube
-
-
23 minutes ago, JorgeB said:
This part looks more like a controller problem.
It would make sense because my UPS is also connected via USB and I often get messages that it's losing communication. Could I update the USB drivers of Unraid?
-
Hello, I changed my server about 3 months ago, and since then I've always had problems with my boot USB key. I've changed it 3 times since, so the problem is not with the USB keys.
This morning I reformatted my key twice and after 2 hours my web interface no longer responds and I have a message that my key is corrupted. When I plug it into my PC, I get a message saying that my key needs to be checked. I've tried all the USB ports and even bought a header to connect directly to my motherboard. I did a 24-hour test of my RAM and had 4 complete passes. I have no more ideas about the origin of the problem, does anyone have an idea?
I have included the diagnostic file in the post.
-
Hi, i was able to take an old backup of my config and copy the new unraid key file, everything is working now thank you vm :)- Have a nice day !
-
1
-
-
Hi, i restarted my server and my disk 7 is disabled / content emulated. The smart look ok how can i fix it ?
-
Ok so my key is dead, i want to replace it but i got this error, could you help me
-
Ok thanks i ll try to copy all the bz file to the key
Edit: When i try to do a backup of all the files on the usbdrive i got a lot of errors
-
My server crashed today and when I try to start it I get this error
bzfirmware checksum error - press ENTER key to reboot ...Edit1: I have the same error if i try in safemode
-
Got this after a normal reboot
modprobe: FATAL : Module nvidia not found in directory /lib/module/6.1.49-Unraid
Edit: I uninstalled several plugins and downgraded the Nvidia plugin. After restarting, I no longer see nvidia error in the log, but the Dashboard still isn't loading.
Edit: I found the probem, the GuiStatistic plugin is causing issue, after removing it the dashboard is loading
-
I started in Safemode GUI with no plugins, and the dashboard is working.
Could it be a plugin that's causing the bug, and how can I identify it?
-
Hello Unraid Community,
I'm seeking assistance with a critical issue I'm facing with my Unraid server. Initially, the problem started with just the dashboard ceasing to respond, while all other tabs were functioning normally. However, this morning, the entire GUI became unresponsive.
Detailed Issue Description:
- Initial Problem: Unraid dashboard stopped responding, but other tabs were still operational.
- Subsequent Issue: The entire GUI failed to respond as of this morning.
- Troubleshooting Attempted:
- Accessed the server via SSH to attempt a restart.
- Forced to perform a hard reset as the restart through SSH did not resolve the issue.
- Current Status: The problem remains unresolved even after the hard reset.
I am concerned about the sudden escalation of this issue and am unsure of the next steps to take. Could anyone provide guidance on how to diagnose and fix this problem? Any insights into what might be causing this sudden failure of the GUI would be greatly appreciated.
Thank you very much in advance for your assistance and suggestions.
-
Hello, I lost a disk last night, I want to shut down my server to replace it but the array won't turn off and nothing is happening in the logs. I don't want to force it to shut down and lose my currently valid parity.
Can you guide me through shutting down my server correctly so I don't lose my parity in order to replace my disk
-
I found the solution on the forum
umount /var/lib/docker
-
22 minutes ago, JorgeB said:
Terminal window/SSH session opened on that disk? Something is still using it.
No, there is no connection. I am the only one using the server. The last time I tried to shut down the array, I had the same problem with the same disk.
I have tried to check if something is using the disk but this command return nothing
lsof | grep /mnt/disk17 -
Before stopping the array i stopped all dockers and Vm's
My parity is valid and i have to replace a disk i dont want to hard shutdown
I have the following error spamming in my logs
Sep 13 10:44:12 Tower emhttpd: shcmd (17757): umount /mnt/disk17
Sep 13 10:44:12 Tower root: umount: /mnt/disk17: target is busy.
Sep 13 10:44:12 Tower emhttpd: shcmd (17757): exit status: 32
Sep 13 10:44:12 Tower emhttpd: Retry unmounting disk share(s)... -
28 minutes ago, JorgeB said:
Try rebooting, the Connect plugin can take some time to show the correct key status.
I was able to activate the USB key, that's not the problem. The issue is that after a few minutes, the key seems to disconnect from the server as if I had removed it. I switched the USB port to see if I still have the problem.
-
I replaced the USB key and I still have the message
-
I just replaced my usb key, because I restarted the server 2-3 times this morning because I still had the usb key error. I restart the server now I'll see if the error comes back quickly.
-
27 minutes ago, JorgeB said:
Enable the syslog server and post that after a crash.
Here is my syslog file
-
Hello Unraid community,
I've been using Unraid OS for several years now, but I've been encountering issues over the past few months. Believing it could be a hardware issue, I decided to change my motherboard. However, even after the change, I'm still experiencing strange issues:
The web interface is not working.
SSH is unresponsive.
This morning, both the web interface and SSH were down, and my VMs were unresponsive. Interestingly, my Plex and some dockers were still running. I had to do a forced restart, and a few minutes later, I received a message indicating that my USB key was corrupted.
I'm reaching out to seek advice or solutions to resolve these persistent issues. Has anyone faced similar problems? Any guidance would be greatly appreciated.
Thank you in advance.
-
Hello, I had already activated the syslog, how do I get the logs.
-
Hello, for a few months my web interface has stopped responding and I have to restart my server / reset for the web interface to work again. Can you help me find the cause
- When the web interface stops responding the server still works Docker / VM
- I tried to connect in private and with another computer
- The restart commands in SSH do not work, I really have to reset the server
- The same problem happened at least 7-8 times
- I had the same problem with previous versions of unraid
-
Hello, I installed an nvidia card in my server to help with plex transcoding. I installed the Nvidia Driver plugin, waited for all to finish. I disabled and re-enabled Docker and then I went to the plugin options. My card is not detected but it is detected in tools system device and when creating virtual machines. I restarted the server several times and I like even uninstalled and reinstalled the plugin but the card is still not detected
-
Oh, I thought he was all in IT mode. I will check how to flash them if possible.
-
Good morning, thank you again for supporting me. I have 3 LSI cards when I bought it said it was flash in IT mode. I would like to leave them like that for now.
My USB drive becomes corrupt all the time.
in General Support
Posted · Edited by nicecube
I would like to buy a USB PCIe card but I don't have any available ports on my motherboard. I have a built in micro SD card reader on the mb, do you think I could use that? Does it share the same USB bus?