ppunraid
-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by ppunraid
-
-
Hello, over the weekend I installed clamAV docker: https://hub.docker.com/r/tquinnelly/clamav-alpine and some apps in the nextcloud docker (preview generator and message vault). I let them run over the weekend eventually stopped clamAV as it started hosing the system. Then I noticed that there were constant writes to the array and rebooted the server. That stopped the writes for a few hours until the array health report ran. I've attached the diagnostics report for some help.
-
Has tcpdump been moved to another plugin? it used to be in the nerdpack. Or is it now native to unraid? I get command not found when I try to run it.
-
Has anyone gotten this to work properly? I got the redirect working, but it automatically denies me access and doesn't go to the login screen. Even going directly to authentic produces the same problem until I turn off the workflows within authentic or remove the configs from the targeted app.
The only way I really got it to work briefly is when all the apps are in the same proxy network, but that isn't really feasible as some apps need to be on it's own IP
-
I'm thinking of setting this up, but I have two questions:
1) How are you handling local access. You wouldn't want to go out to the internet to access your local resources. I already do split DNS, but if your pointing to a port, then I'd have to use a reverse proxy.
2) I have mixed services dependant on SWAG for it's security like pihole, nextcloud, graylog. But some of them have their own IP's that SWAG hook into. Would these services break?
3) Maybe out of scope here, but I want to setup another proxynet that doesn't use the main unraid IP address for this.
-
1 hour ago, ziggie216 said:
I'm reading that Locast dropped the donation when COVID started but seems like in order to use this locast2plex, donation is still required?
Probably not the right forum to discuss your issue, but here's what a quick search brought up:
-
13 minutes ago, BurntOC said:
Added it into config.ini and I can see from the logs that switches it from ip-based location finding just fine. Unfortunately I still can't save DVR in Plex. I've tried LA broadcast OTA, which is what it selects first, and also Locast LA OTA and both error out.
It sounds like you have more of an issue with plex, than with this docker. You may want to check with the plex support forums either here or on plex
-
1
-
-
There's a new offical version of speedtest cli, but I can't seem to find a docker version for it. I'd build one myself, but following someone build one and building on your own are two different things.
-
got this working pretty easily
Not sure where everyone is at, but this is what your suppose to do:
Create an appdata folder: /mnt/user/appdata/locast2plex/
copy the config_sample.ini from the github owner and place it inside the above folder and rename it config.ini
Fix the config to your liking
In the docker container create a new path call it CONFIG
container path: /app/config/
host path: /mnt/user/appdata/locast2plex/
-
Following up on this. How do you get to the appdata folder for this docker? I was under the impression docker containers automatically created folders within the appdata folder.
I want to be able to add 4 tuners to this container. I know I could just create a second container, but I'd like to keep configurations in parity.
-
@littlebudha, good Idea about sending it through a VPN. Didn't think about that.
-
Finally got this working!
Had some personal issues I had to deal with, such as I forgot I only allow certain ip's through my FW (DOH!)
after doing some tcpdumps and some reading...I didn't know that the unraid server couldn't talk to the VM's directly...
Thanks for the setup!
-
Not getting as far as @snappertom. But just wanted to test this before setting up a donation.
Locast2Plex v0.4.2
DEBUG MODE ACTIVE
UUID found.
UUID set to: hmwhuwux...
Logging into Locast using username [email protected]...
Error during login: [Errno -3] Try again
Exiting...
Locast2Plex v0.4.2
Locast2Plex v0.4.2
DEBUG MODE ACTIVE
UUID found.
UUID set to: hmwhuwux...
Logging into Locast using username [email protected]...
Error during login: [Errno -3] Try again
Exiting...I have special characters in my password, so I tried breaks and with quotes, but still no luck.
Also, I can't seem to find the appdata folder. Is this stored somewhere else?
-
8 hours ago, flamegrilled said:
Hi ,
I cannot login.Change passwords and added to the Graylog.conf file.Any clues as to why.Is the password (which is more 16 char) the issue?Pics show containers off atm.
Thanks
Got it working by changing password. Modifying timezone.Going to reinstall again to confirm install.
I finally got this setup during lockdown, If this is your first run, you have to login as root which needs to be encrypted as sha2 format in your conf file. Then after that you can use your admin password going forward.
-
So this is my third crash this month. I've added more ECC ram, moved to a new case added more fans and cpu cooler...Looking at my graphs, the server wasn't doing a whole lot during the crash, I've even ran handbrake for 3 full days trying to compress a tv series and had no problems. It's iritating this is happening so much now. Attached is the server logs and a screen shot of my server statistics just before it's demise. I've also run diagnostics against the ram and didn't show any issues. I could shutdown some additional dockers, but wouldn't a failed docker crash the container rather than the server itself?
Any help would be great!
-
Maybe I should clarify, these aren't lock ups, but system crashes. If I need to change the title, LMK.
-
I'm not using ipv6. The interfaces are set to ipv4 only. There was a link local ipv6 in the routing table however, but I deleted that.
-
Hello, this is the 4th time I've had a lockup on my server in about two months, twice in the last 2 weeks. I'm not sure if it started when I upgraded to 6.7.2, but before then my system has been running flawlessly since then. Haven't done a deep dive on other threads, but a quick glance doesn't lead me to any obvious issues. So I'm posting my diagnostics to get the ball rolling.
Pretty sure this is already in the diag, but will post again for prosperity:
M/B: Dell Inc. 07T4MC Version A01
BIOS: Dell Inc. Version 1.0.15. Dated: 07/12/2018
CPU: Intel® Xeon® CPU E3-1225 v5 @ 3.30GHz
HVM: Enabled
IOMMU: Enabled
Cache: 128 KiB, 128 KiB, 1024 KiB, 8192 KiB
Memory: 16 GiB DDR4 Single-bit ECC (max. installable capacity 64 GiB)
Any help on diagnosis would be great!
-
Hello, webgrab+ has been recently updated to 2.1.9, I was wondering if this could get updated too.
Thanks!
-
11 minutes ago, comet424 said:
thats correct reason i said there is a bug in the openvpn as program
as you see in the previous images... Unraid is set to 1200 not 1194
yet unraid is reading another file then
Interesting. I didn't see the bottom part of your screen shot. Have you tried deleting the appdata for the openvpn configuration?
-
15 minutes ago, comet424 said:
i edited config.json and changed 1194 to 1200 but didnt help
in next 2 photos...
i first did a reboot... then did a FORCE UPDATE then a screen shot after it
and no change still forced 1194 not 1200 like its supposed to be
your screen shots shows that UDP port 1200 is opened on your unraid box,
However the configuration in the openvpn application is a different thing.
-
29 minutes ago, witalit said:
I can't seem to connect to the OpenVPN web portal I get connection refused. I don't have any bonded interfaces just using eth0 in the VARIABLE field of docker config.. any ideas?
I think you need to specify an interface on network type, even if it's obvious your going to be using unraid's ip.
-
49 minutes ago, comet424 said:
oh i have no idea about anything... i did try copying my .ovpn file to unraid and ran command line openvpn --config file.ovpn it tries to connect to pfsense but gets error is the openvpn command line i was using from openvpn-as.. or is it built in..
and does that mean openvpn-as isnt what i need
what i want is
script file
connect openvpn either A Unraid (Remote Site) or B Pfsense Router (Remote Site)
run rysnc from host to Remote Site Unraid all new Data
disconnect OpenVPN from either A or B when rysnc is complete..
now my question is that what OpenVPN-As can do or am i in the wrong forum and i need somethong else
as i truly not sure.. so i figure i ask before i get in trouble being in wrong area
openvpn-as is just a server waiting for people to connect to it. For what you want to do, you'll need a client app. I think there are other opvenvpn versions out there for unraid that may do what you want, or you could do the opposite, have pfsense connect to unrai. From my limited knowledge of pfsense, it's pretty robust, so there shouldn't be an issue doing it that way. Infact, I may be deploying those to my inlaws place
-
On 3/7/2019 at 7:55 AM, Martinoaa said:
I tried to change it to br0 in the docker settings. But then i cannot open the webGI and my phone cant connect. System Information says that i use eth0 network. Does this have anything to say?
@Martinoaa, sorry I didn't see this until now. Reading your original post again, got me thinking...In the docker global settings (unraid menu > settings > system settings > docker) do you have a gateway address set here? You may have to turn on advanced settings to see that. After that I would try doing a tcpdump in from the unraid CLI (sudo tcpdump host 192.168.1.12) and do a ping from the vpn client to try and reach the gateway, internet, unraid.
Also in the openvpn docker console, do an ifconfig. For some reason, in my current vpn implementation, even though i specified a different physical interface in the docker config, I still had to specify eth0 in the INTERFACE configuration portion for it to work.
I was going to try and look at an old appdata backup, but not clear on where to get that information...but hope that will get you started.
-
2 hours ago, Martinoaa said:
Hi!
I am trying to get the openVPN docker to work, I have followed the guide that Spaceinvader One have made.
I am using the openvpn app on mye iPhone. I used the client.ovpn file for setup. The app says that i am connected and i can also se my phone listed under devices in the webUI. But I can not reach the internet or my server.
I have port-forwarded the port to the IP address of the VPN server.
What can be the problem?
Think in your docker config you need to change the INTERFACE to br0 to match network type, also in openvpn gui, check what interface is showing there...It's one of those things that is wrong.
Quick guide for setting up latest Graylog2 docker from Docker Hub
in Docker Engine
Posted
I've had this running for some time now, but since I moved my docker image, a lot of my dockers are broken, which I'm working through. It still runs ATM, but it appears the database is corrupted.