CCNB

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by CCNB

  1. Here is a link to it booting. https://photos.app.goo.gl/I1lGWzo49yh12TCY2
  2. Currently I am running Ubuntu and looking to switch to unraid. From my ubuntu /proc/cpuinfo it shows I have the current micro code that is recommended. processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 60 model name : Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz stepping : 3 microcode : 0x22 cpu MHz : 2057.929 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts bugs : bogomips : 6785.06 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual
  3. Also it is set to legacy by default.
  4. I tried both modes. When I set it to UEFI it would not boot at all. So I moved it back to legacy so it would at least boot until it decides to freeze.
  5. I have actually tried almost every USB port including the onboard mobo usb.
  6. This is one that I built. This is the hardware I used. Intel Xeon E3-1231V3 Haswell 3.4 GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1150 80W BX80646E31231V3 Server Processor ASUS P9D-M Micro ATX Server Motherboard LGA 1150 DDR3 1600/1333 (Latest BIOS 1801) Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3L 1600 (PC3L 12800) Server Memory Model CT2KIT102472BD160B EVGA GeForce 210 DirectX 10.1 01G-P3-1313-KR 1GB 64-Bit DDR3 PCI Express 2.0 HDCP
  7. I used the method mentioned to prepare the USB. The USB will boot on my desktop but will not boot with my server.