If you use asos x570 board it might work if you add this line to syslinux configurator on the flash drive. acpi_enforce_resources=lax
Earlier I only got the k10temps but now I get voltages, fan speed and other temps on my asus prime x570-p pro.
6.9beta1 works great for me so far.
s
ensors
k10temp-pci-00c3
Adapter: PCI adapter
CPU Temp: +80.0°C (high = +70.0°C)
Tctl: +80.0°C
nct6798-isa-0290
Adapter: ISA adapter
in0: 1.34 V (min = +0.00 V, max = +1.74 V)
in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 664.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 992.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 904.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in10: 328.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 544.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 984.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 624 RPM (min = 0 RPM)
Array Fan: 1080 RPM (min = 0 RPM)
fan3: 722 RPM (min = 0 RPM)
fan4: 3268 RPM (min = 0 RPM)
SYSTIN: +45.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +47.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +26.0°C sensor = thermistor
AUXTIN1: +45.0°C sensor = thermistor
AUXTIN2: +21.0°C sensor = thermistor
AUXTIN3: +26.0°C sensor = thermistor
MB Temp: +29.0°C
Virtual_TEMP: +29.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled