[How do I back up a VM when there was no vdisk created?]

Hi all,

 

I am planning to upgrade my old samsung 256gb nvme drive where I passthrough the whole drive to my win 11 gaming VM only. Did a little bit of research on backing VM with the VM back up plug-in, no matter how i tried just doesn't work, i think it was because i am passing through the whole drive instead of creating a vdisk for the VM (is it?)

 

will cloning app like Clonezillia work in my case? is there any better way to do it?

 

 

Thank you very much.

 

 

[[Plugin] NUT v2 - Network UPS Tools]

I have been using NUT plugin since it launched (slave, master was my Syno server), it was running very fine until recently I upgraded my unraid rig, it gives me an immediate auto 90 sec shutdown after powering up, shutdown load was set at 20% and my load was still 100%/30+ mins, any thoughts?

 

Thanks for reading.

 

05/July

Little update, i solved the problem by resetting the UPS breaker (arent so sure if it was caused by the breaker but just work.)

[(Solved) Built a new rig and keep shutting down after it powers on]

1 hour ago, itimpi said:

Cannot see what initiated the shutdown.   I am afraid it looks like you are going to have to do it the hard way and try disabling/enabling plugins until you find the culprit.

 

If investigating which plugin caused the problem it is worth knowing that if you rename any of the .plg files in the config folder to have a different file extension and then reboot that plugin will not load. Naming it back and rebooting will enable it again.

Thanks now i believe it was caused by gpustat.plg, let me remove it and do a fresh install see if it fixes the problem.

[(Solved) Built a new rig and keep shutting down after it powers on]

44 minutes ago, itimpi said:

If it boots in Safe Mode then that means that the Shutdown is being initiated by a plugin you have installed.   It will be a process of elimination to work out which one.

 

You should also set up the syslog server to get some log information that survives a reboot as that could also give a clue.

Thanks, Syslog attached.

 

yesterday i installed INTEL GPU TOP and GPU stats for jellyfin server, don't know if it changed some of the setting.

 

syslog

[(Solved) Built a new rig and keep shutting down after it powers on]

Able to boot up without shutdown in Safe Mode, attached with diagnostics file 

unraid-diagnostics-20220626-1157.zip

[(Solved) Built a new rig and keep shutting down after it powers on]

Hi guys,

 

I have just upgraded my UnRaid server, moving from a good old HP N54L to something more powerful as below. Its been  running for 4 days, testing windows 11 VM and backing up my Syno server, nothing crazy. Even though there were some minor issues but luckily I got it fixed (eg: fastboot), until this morning, I could not connected to my UnRaid, I powered it up and it shutdown again. Turns out that the server keep looping for a Shutdown script etc/rc.d/rc.0 right after I switched on. I have 90s before every shut, what should i do about it, does anyone have any ideas or had similar issues before? Thanks!

 

UnRaid: 6.10.3

 

Docker:

Krusader

Syncthing

Jellyfin (Installed yesterday)

 

Spec

CPU: Intel 12th Gen 12600K (770 UHD)

Motherboard: Asus TUF Gamming B660M with WiFi and BT (D4)

Ram: Adata XPG DDR 3200 16GB X4

Graphic: waiting Nvidia 4000 series

PSU: Antec NE750G 80 Plus

NVME 1: Samsung 970 Pro 1TB (Cache)

NVME 2: Old Samsung 256GB (VM-Gaming)

Case: Fractal Node 804

HDDs:

Parity:

Toshiba MG06 8T Enterprise X1

Data

Toshiba DT01ACA300 3TB X4Toshiba MG05 8T Enterprise X1

UPS: APC BE700G-UK (NUT mode, where my Syno will send a clean shutdown packet to UnRaid if it detects a power failure)

 

 

Here are some corps, no notification or warning whatsoever