[[Plugin] NUT v2 - Network UPS Tools]

On 1/7/2022 at 11:38 AM, Vr2Io said:

It is quite normal for large reading different between power factor aware SMART plug VS UPS, btw UPS usually dealing with VA rather then Watts, so you can't estimate the battery runtime by Watts, only electricity cost would apply by Watts.

Hi, thank you for response, however, i don't think i explained good so you could understand what i mean...

If you look at photo up here in post of user "Blender50", you can see "UPS Load" is around 359watt, or UPS load around 46% (in percentage)... This is how it need to be ...in my case UPS load is 36watt (around 10%)... this is not correct... it should be around 90 watt (around 25% - 30%)... If this was correct, "Runtime Left" could be calculated better...

 

If i could change something to make wattage display correct, everything else would be correct as well.

 

Thanx in advace

 

Best regards

 

Miki

[[Plugin] NUT v2 - Network UPS Tools]

hi, anyone recognize problem i have ? (couple of posts up)...

 

Thanx in advance....

[[Plugin] NUT v2 - Network UPS Tools]

hi guys, thank you very much for this plugin... i have installed it, and use it with my "GreenCell 600VA" UPS, it uses driver "blazer_usb"... i've got it mostly work...only thing that is still not working correctly is "ups load"... it is almost always on 10% (36watt), sometimes goes to 40 or 50 % but my server is behind shelly plug, and i am monitoring energy usage there... and it is around 88 watt (and this is more logic than 36watt for i7 with 5 HDD's etc...)... can i somewhere make correction for this ups load ? (because of this "runtime left" is also not correct of course)..

 

Hope to get some info about this...i am looking hours and hours for some option about this trough forum here and google...couldn't find anything.

 

Thank you in advance.

 

best regards,

 

Miki

[HandBrake]

Thanx for this handbrake docker...works great.