[Unraid 6.7.0 broke an LFTP sftp script]

Hello,

I had a User Script scheduled that would run an LFTP job to connect to an SFTP folder and download/move all of the files from it to the unraid server. Since upgrading to Unraid 6.7.0, the script starts, but it gets stuck at the "Connecting" step and never gets past that nor does it time out. It will run for days if left.

 

Any ideas on where to look? It's nothing fancy.. I was hoping it would be resolved in the next update but same behavior on 6.7.1... Here is the script that is ran:

 

set ssl:verify-certificate no
set sftp:auto-confirm yes
open sftp://(username/password):URL
mirror --Remove-source-files --no-empty-dirs --verbose --use-pget-n=40 -c ~/downloads/done/ /mnt/user/Downloads/
quit

 

Note: on the open command line, I have the real username/password and SFTP url. It worked great prior to 6.7.0

 

[Two identical SSD drives, cache pool showing wrong size after one was disconnected]

The balance didn't sort things out properly. I ended up following jonp's instructions here: 

 

 

 

STARTING POSITION:  Two disks or more in a btrfs cache pool; array is running.

 

1 - Stop Array

2 - Unassign the disk from cache 2 (but do not change the # of slots)

3 - Physically detach cache 2 from the system (remove power / SATA)

 4 - Start the array

 5 - Open the log, notice a "balance" occurring (you'll see a number of entries such as this:

   Quote

Jun 2 08:49:55 Tower kernel: BTRFS info (device sdf1): relocating block group 36561747968 flags 17

6 - When the balance completes, the device you physically removed will be deleted from the cache pool.

Looks better now:

Data, RAID1: total=119.00GiB, used=105.29GiB

System, RAID1: total=32.00MiB, used=48.00KiB

Metadata, RAID1: total=1.00GiB, used=516.38MiB

GlobalReserve, single: total=99.72MiB, used=0.00B

 

 

TL;DR I removed the second cache disk, let things settle, then re-added it back in.

[Two identical SSD drives, cache pool showing wrong size after one was disconnected]

Hello,

I have a cache pool that consists of two 500GB SSD's. Originally, the filesize showed as 500GB which is what I expected for a RAID1.

 

I had an accident where one of the drives got disconnected and when I reconnected it, it appeared as though it stopped being RAID1. The filesize started showing 750GB. I tried rebalancing, stopping the array, rebooting, etc. but it still shows 750GB.

 

Attached are photos of the config, and the cache status. I also noticed that in the balance status, it shows the following. Does this look correct for RAID1?

 

 

Data, RAID1: total=118.00GiB, used=95.00GiB

System, single: total=32.00MiB, used=48.00KiB

Metadata, RAID1: total=1.00GiB, used=496.30MiB

GlobalReserve, single: total=52.44MiB, used=0.00B

[[Plugin] CA User Scripts]

1 hour ago, Senson said:

6.6.4... I will upgrade immediately. Thank you!

Yes, that fixed it. Thanks again

[[Plugin] CA User Scripts]

6.6.4... I will upgrade immediately. Thank you!

[[Plugin] CA User Scripts]

Hello,

I *LOVE* this plugin! However, I am running into an issue. My cache drive failed so I had to reinstall all of my dockers. (I now have backups set up and a cache pool).. The problem I am running in to is that none of the scheduled jobs get executed. They work fine if I start them manually, but they will not run automatically on the schedule -- anyone have any ideas? Did I miss something? I had this set up and working fine before the cache drive went T.U.

 

I've tried rebooting, and using the crond stop and start commands

[Migration from Hyper-V to KVM (Server 2016)]

Great post! I just did this and it worked like a charm. One question -- on the last step, stop the VM and change disk 1 to raw format -- how do I do I convert it to raw format?