-
Posts
142 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by piratx
-
-
Ok. Parity is done without any errors. Nvme is now on unassigned list.
Should I run new config option now?
-
-
Oh sorry. Yes i am opening the box to get the disk. I have many installed like that
-
Format was always that in my mind.. or create an empty table to put data on cells.
Like I said though, the disk is an 8TB external which have some files, but will find/see it like all the others.
Others had files in and I got them on unassigned devices and others I just chose them to be added on the array on start.. unRAID found them unused and it just "asked" me what I would like to do with those.
Still backing up..
root@eleven:/mnt/user/backup/unraid/appdata# du -h
47G ./[email protected]
65G ./[email protected]I don't know if I need to clean this up a bit previous backup was 65G and the backup is slow
Edit: Okay done just 47G this time.
-
Yes, its an empty disk. No need to worry about it. I let you know if I cannot add it on slot "8" which is missing from the list.. or I shouldn't care New config will do what should be done right?
-
Ok, I'll try to start with the disk addition in a hour or something.
Backuping up appdata to my array is fine right?
1 hour ago, trurl said:Make very sure you don't assign any data disk to any parity slot or it will be overwritten with parity.
That would make things much complicated Thanks for mentioning it!
-
7 hours ago, trurl said:
Why is your docker.img so large? Are you sure you don't have some application writing into it instead of to mapped storage?
On 11/16/2021 at 7:58 AM, piratx said:I've increased docker.img cause it was giving me status reports that it's going to be full from time to time.. Something like this:
eleven: Alert [ELEVEN] - Docker image disk utilization of 92%
Docker utilization of image file /mnt/user/system/docker/docker.img7 hours ago, trurl said:Does your domains really need to be that large?
It's just tests! I've created one of those VMs (the bigger one 200GB) to make some docker setup tests.. so I won't mess up with my original setup..
So that can be moved to the array for future reference or deleted if I keep just my docker compose configs etc. It's not really an issue.
So, if it's a matter of NVMe capacity, I could easily swap that one with a 512GB.
So, if I got those correct, in that NMVe it will be my appdata and VMs in a new pool.
I am removing or not my 4TB disks (disk 5) with the UDMA CRC error and adding my new 8TB in there as well, can be placed on disk 8 which is missing (as a number from the list?)
After I do that I run New config so the changes pass to the array..
What's the best way to move my appdata into the NMVe and only have it there? I recall last time I checked my appdata is 42-45GB (Plex library uses almost ~40GB of that?) also, when I'll have appdata in only one disk, I will need backup, or I can use my plugin like before?
Thanks for all the help, I've connected to discord channel as well
-
-
Still loading
-
25 minutes ago, trurl said:
Also, what do you get from the command line with this?
du -h -d1 /mnt/disk11
5.8M /mnt/disk11/appdata
202G /mnt/disk11/domains
202G /mnt/disk11 -
1 minute ago, trurl said:
you want some disk assigned as disk8 so there isn't a gap?
Yes please
-
A year ago for sure... I was just really busy to deal with it
-
-
1 minute ago, trurl said:
Or did you never have a disk8 installed?
No I had, I am recalling using MC via terminal to move the items from that disk.. it was just that I was +1 disk for some months until I got another 8tb to remove that +1.
-
Yes everything is valid.. Can't remember exactly what I've did sorry. I remember replacing a disk and adding a new one and then I moved back to 10 again..
Was like 8 disks / then 9 disks and then I added the nvme.. can't remember..
-
Hello and thank you for your answer!
I typed the version wrong.. sshh sorry
I have removed the disk cause of problems and I placed a new 8tb instead of 4tb the previous one was. Never did "New config" so far. So no I just left the slot "open" I suppose!
Ah sorry Disk 5 is giving me the UDMA CRC errors (WDC_WD40EFRX-68N32N0_WD) I have some disks which I installed from external 8tb disks (all WD) and I got a cheat from a friend for them to work properly on my setup.
I want to keep nvme disk 11 on its own pool, probably for appdata (will that make things faster) and VMs..
Diagnostics included
-
Hello, I am sure this might have been answered in the past but searching for some minutes now and didn't find anything to match my setup.
So I have unRAID 6.9.2 with one Parity disks and 10 disks. Little note here, some 4tb disk in the past had issues so I removed it from my array. Cause of this I have now Parity Disk 1-7 and then 9-11, Disk 8 is missing.
Now, I want to fix this for a while now but my day was full for the last months.. but I have a new 8tb disk to add in there.
What I have done "wrong" in the past was the addition of a NVMe SSD on my array (Disk 11), I've added that to keep my VMs and I couldn't do it with a second pool back then.
So I need to remove DIsk 11 from the array and fix Disk 8 which is missing.. problem here is my hardware won't let me add another disk so I need to remove an old one so I can do this.
That would be a disk which is giving me this error for some years now.
How should I do the above?
I have tried to remove stuff from the Disk 11 (nvme) via a crazy way.
I've excluded the disk from all the shares but I can still "see" files on it (domains, appdata).
An the last thing. Should I continue using Cache pool with 2 SSDs or I can do that with one only?
Depends of what I am using those SSDs for I assume?
Only : Cache for appdata / Yes : Cache for my main shares. So everything I am copying over the network to array it goes through the SSDs.
Sorry for the long text and I 'm looking forward for your replies!
-
Thanks for your answer. I have tried to make my share public and used it the way you showed me.
I got No. Prog available and then I deleted my /etc/nfs.conf file and everything worked finally
Thank you for all your answers!
-
On 10/19/2021 at 5:47 PM, ken-ji said:
10.0.0.0/24(sec=sys,rw,async,insecure,no_subtree_check,crossmnt)
I need the client (my mac) will have to be admin, rw access etc.
What is strange, is that Synology shares works with my options provided on the screenshot above but Unraid won't like it no matter what I am trying.
On NFS settings the Tunable (fuse_member) is set to 330.
Then on shares.. I am going to "eleven" my main share with settings:
export: Yes
security: Private
rule: 10.0.0.0/24(sec=sys,rw,async,insecure,no_subtree_check,crossmnt,anonuid=99,anongid=100,all_squash)
But with both Finder and the Terminal cannot mount from Unraid, but as I said synology works
Thanks for all the help! -
On 1/7/2011 at 12:10 PM, starcat said:
or modify the automounter like this:
http://lime-technology.com/forum/index.php?topic=7536.msg95249#msg95249
Can you help with that link please?
I am trying to mount NFS share to my mac without any luck.. Thanks in advance
-
On 1/19/2020 at 2:10 AM, ken-ji said:
There are special rules for root mapping and anonymous user access
Even, after so many months thank you for this.
Couldn't imagined it working this way. Was struggling with the username/password idea (like afp,smb etc).
Now I have for quite a while my synology setup with NFS and I would say it's a bit faster that the simple SMB.
Moving stuff to unraid though, cause yeah it's still one of a kind and cannot be compared to others. So many disks inside, so few to think about. Anyways. This is my setup, any easy way to type that done in rule on unraid settings?
Thanks in advance
-
Great. Just hope the new profile I created didnt changed those settings I had before!
I needed to create new profile after i replaced 2 disks with one new
Thanks for replying back so quickly! -
Ok changed the PSU and report back here if I have the same issue again. Just hope it was the PSU!
-
So everything is good with my setup. The new disk will be used for a little while now until is filled up like the others I suppose!?
Sent from my iPhone using Tapatalk
Removing disk from Array, adding a new one and more
in General Support
Posted
No I let it finish with the Parity check, I removed the NVMe, and added the new 8TB in Disk 11 slot
Should I preserve current assignments when I use New Config? Thanks again for all the help!