Marauder
-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Marauder
-
-
2 minutes ago, JorgeB said:
We can 't see why the disks got disable because of the reboots but they look healthy, and two disks getting disable at the same time is seldom a device problem, since the emulate disks are mounting and assuming contents look correct you can rebuild on top:
https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
thanks for the quick reply and help. I'll go through that process.
-
-
2 minutes ago, JorgeB said:
Once a device gets disable it needs to be rebuilt, but first please post the diagnostics.
thanks, here are the diagnotistcs.
My last reboot I moved the ZR118ZZN serial device to another sata port. So if you see that in the diag, that's why. Eitherway they all get read.
-
I added another drive to my machine. When I went to the UI to stop the array and to add the device, I saw that 2 of my devices are now showing as offline and contents being emulated. I restarted the server, no change. I checked all the cables and I don't see an issue with any of them. I started the array in maintenance mode, and ran a quick smartctl scan and an filesystem check on both the drives. they both passed and came back clear. But Unraid is still showing the drives as missing.
-
good to know, the pages happened to be correct step, by step, but never know if that'll change. so good to have it here for anyone that comes looking in the future.
-
Resolved: PHEW.
Unmounted array, remounted in maintenance mode. Than ran file system check on each drive. Then restarted server. I first tried just remounting the array not in maintenance mode, and that didn't work.
Before doing the file system check, I tried unmounting and remounting the array and rebooting, neither worked. I also tried remounting after the file system check and that didn't work either, I had to do a full reboot.
Pages used:
https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGuihttps://wiki.unraid.net/Check_Disk_Filesystems
-
This morning I went and updated some of my plugins as I saw I had an update. I updated Nvtop, unassigned drivers, and ublalance. After that, my docker containers crashed, and when I went to start them I'd get an error. Trying to access my share I get this error. I tried unmounting and rebooting.
root@unraid:/mnt# ls
/bin/ls: cannot access 'user': Transport endpoint is not connected
cache/ disk1/ disk2/ disk3/ disk4/ disk5/ disk6/ disk7/ disk8/ disk9/ disks/ download/ remotes/ rootshare/ user/ user0/
root@unraid:/mnt# cd user
-bash: cd: user: Transport endpoint is not connected
root@unraid:/mnt#Panicing a bit here, thinking I've broken my system, any help would be appreciated.
-
2 minutes ago, JorgeB said:
Minimum size for cache and/or pool must be correctly set.
Thanks, again. I had Minimum free space: 0kb as the drive still had a 200kb of space left, I assume thats why it didn't trigger. So i corrected the free space min to 100mb.
-
1 minute ago, JorgeB said:
Raid0 can only use 1TB, change to single profile if you want the full 1.5TB.
Thanks, I'll switch it now, and see what happens. I saw the drive reporting as 1.5tb when I had it as raid0, so I thought it was right.
-
I noticed another issue, I have the cache setup as Prefer. Though the drive is full, my current downloads have all failed. They're not being transferred over to the array, like they're supposed to.
-
-
-
Figured out how to change it, it was under the cage settings and balance. I set it to raid0
-
So I changed out my motherboard(same CPU) from a MSI z77a-g43 to an ASROCK Fatal1ty Z77.
They both use the came chipsets.
When going to boot, on the new ASROCK board, unraid gets through majority of the boot process and then kernel panics. I swapped motherboards back and machine boots right up. Any suggestions?
-
So i'm setting up multiple cache pools. The first is a single disk, the second pool is a 1tb and a 500gb SSD drive. When I formatted and initialized that pool it gave me a size of 750 and free space as 500gb. I was expecting it to be 1.5tb. How do I change it so that it's 1.5tb?
Also when setting up my docker mounts, do I point to the share location or the cache location?
for example if I have a share called downloads do I point my docker mount to: /mnt/user/downloads or /mnt/download? assuming the cache is called dowload?
-
1 minute ago, itimpi said:
Rsync is included as standard with Unraid. What made you think it was not?
just a brain fart. Thought I checked and it didn't have it.
-
anyway to add rsync?
-
I just went with a VM approach. It's not ideal, but I just did a Debian vm with max 2 cpu and 1gb ram.
-
I know this is a dead thread but wondering if cangtning has changed since. Looking for a good option for downloading f1 races automatically.
-
I"m going to try out nextcloud as it has ios app support. If that doesn't work i'll try owncloud.
-
I was really wanting a dropbox docker. Hopefully there will be a work around for this. Looks like they changed things sometime last night.
-
That’s what I was thinking of doing. I’m new to unraid so not sure how full fledged the command line is and if I can download additional packages. It didn’t seem like apt or zypper was installed. Forgot to check yum.
-
A feature I’d like is to have multiple drive pools.
Mom looking to setup a storage drive pool of my sata drives but then I also want a ‘performance’ drive pool made up of my 4 SSD drives.
Right now I don’t see a way to do this but this would be helpful for those running vms and other more disk intensive activities.
The multiple pools could also also help people who want different levels of protection of their data. Like no parity on one pool and parity on another.
- 2
Missing drives but OS still sees them
in General Support
Posted
with that process should I do each drive 1 at a time, or can I repair both at the same time?