jh1987
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jh1987
-
-
I've tried the steps above by rolling back to the older version linuxserver/openvpn-as:2.6.1-ls11 and I can't get the web gui to show up still. Anyone have any ideas?
-
9 hours ago, Djoss said:
You just need to change the permission of "/storage": edit the container settings, enable "Advanced View" (upper right toggle), edit the "Storage" setting and change the "Access Mode" to "Read/Write".
Thank you! Always forget about the "Advanced View". That did the trick for me. Appreciate your help. I don't understand why /storage does default to read/write when installing the app.
-
On 1/14/2019 at 5:01 PM, jonathanm said:
That may or may not be an ongoing issue for you. Some people have nothing but issues with Marvell based cards in newer linux systems.
I was wondering the same thing. Is there a card you recommend for someone on a budget?
-
On 1/14/2019 at 4:38 PM, trurl said:
yes
Got it. I have a replacement on order from Seagate. I'll give it a swap. Appreciate your help.
-
Anyone having issues restoring files. I get an error that the container doesn't have the right permissions. I tried following the steps on github and it created a second container that would start but I could never get to the GUI. I've got all my files backed up and see them in CrashPlan but I just can't seem to restore them.
-
12 minutes ago, johnnie.black said:
This is all you need to look at:
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 1303 5469842936Failed SMART test = failed drive
Sorry, I'm still not understanding are you saying the drive has failed and that I should replace it?
-
On 1/9/2019 at 7:05 PM, NWComputerGuy said:
Sorry I didn't explain that better (At the time, I was still very new at UnRAID terminology) I did indeed use a VM with a Standard install of Windows 7 Home Prem. and not a Docker container! Hope you were able to still setup your Quickbooks!
No problem I figured out that is probably what you meant. I can't seem to get good performance from my VM. What are your hardware specs like? Do you experience any slowdowns? It seems like my VM is really sluggish.
Also, do you just host your files on the VM and then access them on another computer or do you log in to your VM whenever you use Quickbooks?
Thanks!
-
Can someone help me understand Smart Drive Data? I've got some errors. I've attached the log files and posted the short self-test data below:
I've tried swapping out the cable. The Hard Drive is a Seagate Ironwolf 3TB and it's brand new. My config is four 3TB Seagate Ironwolfs 3 are acting as storage and 1 is parity. I also have a 500gb Samsung Evo acting as a cache drive. The four Seagate drives are connected to a controller (I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid SI-PEX40064)
The first two drive and the parity drive all have not had any issues and I ran pre-clear on all four drives when setting my system up.
Thanks for your help!
-
On 11/2/2018 at 8:21 AM, NWComputerGuy said:
so I created a docker image of Windows 7 and installed Quickbooks on there in the default way and chose the store my file on this computer option, in essence using it as a server.
Hey NWComputerGuy,
I am looking to do the same thing you did with Quickbooks. How do you create a docker image of Windows 7. I can only find info on how to create windows as a VM.
Thanks!
[Support] Linuxserver.io - OpenVPN AS
in Docker Containers
Posted
These steps didn't work for me. Any other ideas?