[Multiple disks unmountable after upgrade to 6.9.2]

It worked! Thank You! 

[Multiple disks unmountable after upgrade to 6.9.2]

On 5/6/2022 at 8:21 AM, JorgeB said:

It should be using a standard LSI IT firmware, in the link shows how to list current firmware, post the output here.

Sorry for the delay

Here is its output

 

LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18) 
Copyright (c) 2008-2014 LSI Corporation. All rights reserved 

        Adapter Selected is a LSI SAS: SAS2008(B2)   

Num   Ctlr            FW Ver        NVDATA        x86-BIOS         PCI Addr
----------------------------------------------------------------------------

0  SAS2008(B2)     10.00.08.00    0a.02.00.21    07.19.00.00     00:05:00:00
1  SAS2008(B2)     10.00.08.00    0a.02.00.20    07.19.00.00     00:42:00:00

        Finished Processing Commands Successfully.
        Exiting SAS2Flash.

 

Thanks 

[Multiple disks unmountable after upgrade to 6.9.2]

Thanks ill give this a go

 

Im still not 100% familiar with these bits, but I'm guessing my card would have had a custom firmware so it would work with Unraid, will upgrading the firmware cause a problem with that?

 

Thanks 

[Multiple disks unmountable after upgrade to 6.9.2]

Thanks

 

Ive posted 3 diag files, one from after boot, one from after starting the array (when everything mounted properly) and then one from when the disks became unmountable 

 

 

1.zip 2.zip 3.zip

[Multiple disks unmountable after upgrade to 6.9.2]

HI

 

I upgraded to 6.9.2 yesterday but when I start my array 6 of the drives are now unmountable, but are detected, no other settings were changed, upgrade went fine, what is causing this and how do I fix it?

The parity drive is now also not working

 

Thanks! 

tower-diagnostics-20220505-0706.zip

[[Support] selfhosters.net's Template Repository]

HI all, installed backblaze_personal_backup without issue

But can't get it to get past the initial screen

 

I keep getting the error "The installer could not communicate with...."

 

How can I get round this?

 

Thanks! 

 

 

 

All other docker containers are fine, but can't get this to work

[[Plug-In] Community Applications]

Just now, Squid said:

 

Thanks! 

[[Plug-In] Community Applications]

7 minutes ago, Squid said:

 

6.8.3 is not supported by CA.  The lowest version of the OS it will use is 6.9.0  You should upgrade to 6.9.2

 

 

Any way of getting it to run on 6.8.3?

 

Had issues trying to upgrade and we think its the server IO board not working well with 6.9

[[Plug-In] Community Applications]

On 4/16/2022 at 7:19 AM, Nuke said:

After downgrade CA to 2021.08.31 (to work with Unraid 6.8.3) all containers loose ability to autoupdate - link "not available". How to fix that?

Force update works well.

 

 

 

Take a look here, worked for me

 

[[Plug-In] Community Applications]

Hi all, 

 

receiving this error when trying to open the Apps tab

 

Ive enabled debugging but when I click on it, nothing happens, no zip file etc, its just a blank screen

 

What could be causing this?

 

Thanks 

 

Something really wrong went on during defaultSortOrder
Post the ENTIRE contents of this message in the Community Applications Support Thread

OS: 6.8.3 
Browser: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/15.4 Safari/605.1.15
Language: 

<br /> <b>Warning</b>: require_once(/usr/local/emhttp/plugins/dynamix/include/Translations.php): failed to open stream: No such file or directory in <b>/usr/local/emhttp/plugins/community.applications/include/exec.php</b> on line <b>15</b><br /> <br /> <b>Fatal error</b>: require_once(): Failed opening required '/usr/local/emhttp/plugins/dynamix/include/Translations.php' (include_path='.:/usr/local/emhttp') in <b>/usr/local/emhttp/plugins/community.applications/include/exec.php</b> on line <b>15</b><br />

[Cache pool lost after upgrade to 6.9.2]

I have just upgraded to 6.9.2

All devices are recognised but my cache pool devices werent assigned to the Cache 1 and Cache 2 slots. 

When i select them they are now recognised as new devices and i get the warning that all data will be erased on them

What can i do to restore the cache without loosing the data on it?

I remember having this issue before, and ended up having to downgrade, restore all my docker containers and manually pull all the data off the drives before creating a new cache pool. But would rather avoid that if possible! 

Diags and screenshot attached

Thanks! 

tower-diagnostics-20211118-1621.zip

[Very Slow Array Start]

Ahhh ok

Thanks! I will find some new ones and give it a go! 

[Very Slow Array Start]

Sorry 

Here are the new ones

Thanks 

tower-syslog-20200318-1114.zip tower-diagnostics-20200318-1114.zip

[Very Slow Array Start]

Thanks All

Ive attached new Diag and System Logs

The Array has finally started

tower-syslog-20200317-2110.zip tower-diagnostics-20200317-2110.zip

[Very Slow Array Start]

Thanks Guys

Sys Log Attached

tower-syslog-20200317-1937.zip

[Very Slow Array Start]

Sorry! i had it in my mind to attach it and forgot! 

here is it

tower-diagnostics-20200317-1838.zip

[Very Slow Array Start]

HI

 

Yes its still the same, same "main" page as above

[Very Slow Array Start]

Evening All 

Since ive had my server, it takes >90 mins to start my Array, I had hoped with the OS upgrade this would be fixed but its still taking over 2 hours to start the array. 

The server always has an internet connection on start, but I'm not sure what is causing this. 

During the starting process, this is what I see on my main page

 

Diag files attached

Any help would be appreciated! 

Thank You 

tower-diagnostics-20200316-2351.zip