shafiq786110

It worked! Thank You!

Sorry for the delay Here is its output LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved Adapter Selected is a LSI SAS: SAS2008(B2) Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr ---------------------------------------------------------------------------- 0 SAS2008(B2) 10.00.08.00 0a.02.00.21 07.19.00.00 00:05:00:00 1 SAS2008(B2) 10.00.08.00 0a.02.00.20 07.19.00.00 00:42:00:00 Finished Processing Commands Successfully. Exiting SAS2Flash. Thanks

Thanks ill give this a go Im still not 100% familiar with these bits, but I'm guessing my card would have had a custom firmware so it would work with Unraid, will upgrading the firmware cause a problem with that? Thanks

Thanks Ive posted 3 diag files, one from after boot, one from after starting the array (when everything mounted properly) and then one from when the disks became unmountable 1.zip 2.zip 3.zip

HI I upgraded to 6.9.2 yesterday but when I start my array 6 of the drives are now unmountable, but are detected, no other settings were changed, upgrade went fine, what is causing this and how do I fix it? The parity drive is now also not working Thanks! tower-diagnostics-20220505-0706.zip

HI all, installed backblaze_personal_backup without issue But can't get it to get past the initial screen I keep getting the error "The installer could not communicate with...." How can I get round this? Thanks! All other docker containers are fine, but can't get this to work

Thanks!

Any way of getting it to run on 6.8.3? Had issues trying to upgrade and we think its the server IO board not working well with 6.9

Take a look here, worked for me

Hi all, receiving this error when trying to open the Apps tab Ive enabled debugging but when I click on it, nothing happens, no zip file etc, its just a blank screen What could be causing this? Thanks Something really wrong went on during defaultSortOrder Post the ENTIRE contents of this message in the Community Applications Support Thread OS: 6.8.3 Browser: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/15.4 Safari/605.1.15 Language: <br /> <b>Warning</b>: require_once(/usr/local/emhttp/plugins/dynamix/include/Translations.php): failed to open stream: No such file or directory in <b>/usr/local/emhttp/plugins/community.applications/include/exec.php</b> on line <b>15</b><br /> <br /> <b>Fatal error</b>: require_once(): Failed opening required '/usr/local/emhttp/plugins/dynamix/include/Translations.php' (include_path='.:/usr/local/emhttp') in <b>/usr/local/emhttp/plugins/community.applications/include/exec.php</b> on line <b>15</b><br />

I have just upgraded to 6.9.2 All devices are recognised but my cache pool devices werent assigned to the Cache 1 and Cache 2 slots. When i select them they are now recognised as new devices and i get the warning that all data will be erased on them What can i do to restore the cache without loosing the data on it? I remember having this issue before, and ended up having to downgrade, restore all my docker containers and manually pull all the data off the drives before creating a new cache pool. But would rather avoid that if possible! Diags and screenshot attached Thanks! tower-diagnostics-20211118-1621.zip

Ahhh ok Thanks! I will find some new ones and give it a go!

Sorry Here are the new ones Thanks tower-syslog-20200318-1114.zip tower-diagnostics-20200318-1114.zip

Thanks All Ive attached new Diag and System Logs The Array has finally started tower-syslog-20200317-2110.zip tower-diagnostics-20200317-2110.zip

Thanks Guys Sys Log Attached tower-syslog-20200317-1937.zip

Sorry! i had it in my mind to attach it and forgot! here is it tower-diagnostics-20200317-1838.zip

HI Yes its still the same, same "main" page as above

Evening All Since ive had my server, it takes >90 mins to start my Array, I had hoped with the OS upgrade this would be fixed but its still taking over 2 hours to start the array. The server always has an internet connection on start, but I'm not sure what is causing this. During the starting process, this is what I see on my main page Diag files attached Any help would be appreciated! Thank You tower-diagnostics-20200316-2351.zip

Im very very new to unRAID, but since transferring all my data onto the server, starting my array takes over 3 hours I keep refreshing the "main" page and i slowly see each drive being mounted and finally the array starts, but im presuming this shouldn't take this long to mount? Any help will be appreciated! I've attached the diagnostics file This time, i have added in 2 SSD cache drives and its taking even longer to mount! Thanks tower-diagnostics-20190419-1917.zip

Thank You! I will look for an hba

Hi I'm about to swap from my Synology to a DL380p It has a P420 card in it Can someone please let me know if this card will work with unRAID, or if I need another card so that unRAID will see and work the drives properly and with SMART support. I've had a look around the forums and seem to be getting a mixed set of responses, and i though it may be better to ask directly Thanks