Jump to content

scotticles

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by scotticles

  1. I have a USB 10 TB drive used for backups, this is somewhat of a new setup trying to get my backups running smoothly. The drive has two partitions, 1 is EFI, it mounts just fine after a disconnect. The second partition is my exFAT partition that contains all my backup data.

     

    I am using https://www.amazon.com/dp/B0151BDW9S/ref=cm_sw_r_sms_c_api_i_FTrcEbFW9RAHX as the disk bay which I am thinking might be the culprit. I can remount this using the nonempty option for fuse but thats using cli and a manual thing i have to do every once in awhile.

     

    I am looking for suggestions on what to do. I am considering buying a sata to usb connector that is not a case and see how that goes.

     

    Dec 28 21:20:41 UnRaidTower kernel: usb 2-2: USB disconnect, device number 7
    Dec 28 21:20:41 UnRaidTower kernel: sd 11:0:0:0: [sdg] Synchronizing SCSI cache
    Dec 28 21:20:41 UnRaidTower kernel: sd 11:0:0:0: [sdg] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
    Dec 28 21:20:45 UnRaidTower kernel: usb 2-2: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
    Dec 28 21:20:45 UnRaidTower kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
    Dec 28 21:20:45 UnRaidTower kernel: usb-storage 2-2:1.0: Quirks match for vid 174c pid 55aa: 400000
    Dec 28 21:20:45 UnRaidTower kernel: scsi host12: usb-storage 2-2:1.0
    Dec 28 21:20:46 UnRaidTower kernel: scsi 12:0:0:0: Direct-Access     ASMT     ASM1156-PM       0    PQ: 0 ANSI: 6
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: Attached scsi generic sg1 type 0
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] 4096-byte physical blocks
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Write Protect is off
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Mode Sense: 43 00 00 00
    Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Dec 28 21:20:58 UnRaidTower kernel: sdh: sdh1 sdh2
    Dec 28 21:20:58 UnRaidTower kernel: sd 12:0:0:0: [sdh] Attached SCSI disk
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Adding disk '/dev/sdh1'...
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Adding disk '/dev/sdh2'...
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount drive command: /sbin/mount -t vfat -o auto,async,noatime,nodiratime,nodev,nosuid,umask=000 '/dev/sdh1' '/mnt/disks/EFI'
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount drive command: /sbin/mount -t exfat -o auto,async,noatime,nodiratime,nodev,nosuid,umask=000 '/dev/sdh2' '/mnt/disks/Plex_Backup'
    Dec 28 21:20:58 UnRaidTower kernel: FAT-fs (sdh1): Volume was not unmounted cleanly
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount of '/dev/sdh2' failed. Error message: FUSE exfat 1.2.8 WARN: volume was not unmounted cleanly. fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option 
    Dec 28 21:20:58 UnRaidTower unassigned.devices: Partition 'Plex_Backup' could not be mounted...

     

  2. Tossed it around and finally got my parts picked and shipped, comes monday :D. Its a starter box, planning to get a few docker containers going, super excited.

    also

    twitter is @scotticles and im following.

     

    first build for unraid: ryzen 3, starting with 8 gb probably bump that up in a few months, i like my case i picked 8 storage bays.

    https://pcpartpicker.com/user/scottscreations/saved/#view=mgYJbv

    • Like 1
  3. Did your friend end up buying the server? I am considering this one as well. I am a little worried about the noise level but it would be in a closet behind a closed door...and was looking at doing 5tb drives.

×
×
  • Create New...