I have a USB 10 TB drive used for backups, this is somewhat of a new setup trying to get my backups running smoothly. The drive has two partitions, 1 is EFI, it mounts just fine after a disconnect. The second partition is my exFAT partition that contains all my backup data.
I am using https://www.amazon.com/dp/B0151BDW9S/ref=cm_sw_r_sms_c_api_i_FTrcEbFW9RAHX as the disk bay which I am thinking might be the culprit. I can remount this using the nonempty option for fuse but thats using cli and a manual thing i have to do every once in awhile.
I am looking for suggestions on what to do. I am considering buying a sata to usb connector that is not a case and see how that goes.
Dec 28 21:20:41 UnRaidTower kernel: usb 2-2: USB disconnect, device number 7
Dec 28 21:20:41 UnRaidTower kernel: sd 11:0:0:0: [sdg] Synchronizing SCSI cache
Dec 28 21:20:41 UnRaidTower kernel: sd 11:0:0:0: [sdg] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Dec 28 21:20:45 UnRaidTower kernel: usb 2-2: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
Dec 28 21:20:45 UnRaidTower kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
Dec 28 21:20:45 UnRaidTower kernel: usb-storage 2-2:1.0: Quirks match for vid 174c pid 55aa: 400000
Dec 28 21:20:45 UnRaidTower kernel: scsi host12: usb-storage 2-2:1.0
Dec 28 21:20:46 UnRaidTower kernel: scsi 12:0:0:0: Direct-Access ASMT ASM1156-PM 0 PQ: 0 ANSI: 6
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: Attached scsi generic sg1 type 0
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] 4096-byte physical blocks
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Write Protect is off
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Mode Sense: 43 00 00 00
Dec 28 21:20:46 UnRaidTower kernel: sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 28 21:20:58 UnRaidTower kernel: sdh: sdh1 sdh2
Dec 28 21:20:58 UnRaidTower kernel: sd 12:0:0:0: [sdh] Attached SCSI disk
Dec 28 21:20:58 UnRaidTower unassigned.devices: Adding disk '/dev/sdh1'...
Dec 28 21:20:58 UnRaidTower unassigned.devices: Adding disk '/dev/sdh2'...
Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount drive command: /sbin/mount -t vfat -o auto,async,noatime,nodiratime,nodev,nosuid,umask=000 '/dev/sdh1' '/mnt/disks/EFI'
Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount drive command: /sbin/mount -t exfat -o auto,async,noatime,nodiratime,nodev,nosuid,umask=000 '/dev/sdh2' '/mnt/disks/Plex_Backup'
Dec 28 21:20:58 UnRaidTower kernel: FAT-fs (sdh1): Volume was not unmounted cleanly
Dec 28 21:20:58 UnRaidTower unassigned.devices: Mount of '/dev/sdh2' failed. Error message: FUSE exfat 1.2.8 WARN: volume was not unmounted cleanly. fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option
Dec 28 21:20:58 UnRaidTower unassigned.devices: Partition 'Plex_Backup' could not be mounted...