nisbne
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by nisbne
-
-
hi guys, wanting to add the backup feature in for palworld, is it as easy as adding the following to the Extra Game Parameters line in the docker ?
-useperfthreads -NoAsyncLoadingThread -UseMultithreadForDS -queryport=27015 -BACKUP=true -BACKUP_INTERVAL=120 -BACKUP_TO_KEEP=12
looks like this when i start the docker? -
amazing -L corrected the issue. id say the drive i replaced is fine also going off the smart logs. can i just add it back into the array in a new slot and format it via the webgui when prompted?
-
hi @trurl, sorry i copied that from the help guide site. the exact command on terminal was : xfs_repair -v /dev/sdf & xfs_repair -v /dev/sdd.
i will run it via webui with the -n now and come back with results. yes i still have the original drive here.
edit:
as requested ive re run via webui with -n and posting full results.sdd ( drive i replaced yesterday)
sdf ( drive is a few months old ) -
hi all, i had a drive pop up saying it was "Device is disabled, contents emulated", i read the guide a guide on here to stop the arrary remove the device start,stop and rebuild it which i did that completed. this didnt fix so i replaced the drive. the rebuild was successful but after completion the new drive and another drive now showed "Unmountable: Unsupported or no file system". i have now started the array in maintenance mode and ran xfs_repair -v /dev/mdX as per https://docs.unraid.net/unraid-os/manual/storage-management/#repairing-a-file-system
one drive has finished so far with the error: "Sorry, could not find valid secondary superblock
Exiting now."the other drive is going still but i assume it will also fail.
so im reaching out for help on next steps.
attached is my diag file. any help would be greatly appreciated.
edit: i first ran fs check via gui they both failed:
sdf: Inode allocation btrees are too corrupted, skipping phases 6 and 7 No modify flag set, skipping filesystem flush and exiting.
sdd:Inode allocation btrees are too corrupted, skipping phases 6 and 7 Maximum metadata LSN (17:2383993) is ahead of log (17:2367489). Would format log to cycle 20. No modify flag set, skipping filesystem flush and exiting.
after that i ran via
-
hi all, as others have mention, my syslog is getting flooded with these error messages, any idea on a fix?
i have disable the plugin for now, please let me know if i can supply any other info to assist
Apr 29 11:44:52 Tower kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] Apr 29 11:44:52 Tower kernel: caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
root@Tower:~# nvidia-smi -x -q
<?xml version="1.0" ?>
<!DOCTYPE nvidia_smi_log SYSTEM "nvsmi_device_v10.dtd">
<nvidia_smi_log>
<timestamp>Wed Apr 29 11:58:40 2020</timestamp>
<driver_version>440.59</driver_version>
<cuda_version>10.2</cuda_version>
<attached_gpus>1</attached_gpus>
<gpu id="00000000:06:00.0">
<product_name>GeForce GTX 1650 SUPER</product_name>
<product_brand>GeForce</product_brand>
<display_mode>Disabled</display_mode>
<display_active>Disabled</display_active>
<persistence_mode>Disabled</persistence_mode>
<accounting_mode>Disabled</accounting_mode>
<accounting_mode_buffer_size>4000</accounting_mode_buffer_size>
<driver_model>
<current_dm>N/A</current_dm>
<pending_dm>N/A</pending_dm>
</driver_model>
<serial>N/A</serial>
<uuid>GPU-603c37b8-6a15-4062-1b3e-29ff3afcea1d</uuid>
<minor_number>0</minor_number>
<vbios_version>90.16.46.00.DE</vbios_version>
<multigpu_board>No</multigpu_board>
<board_id>0x600</board_id>
<gpu_part_number>N/A</gpu_part_number>
<inforom_version>
<img_version>G001.0000.02.04</img_version>
<oem_object>1.1</oem_object>
<ecc_object>N/A</ecc_object>
<pwr_object>N/A</pwr_object>
</inforom_version>
<gpu_operation_mode>
<current_gom>N/A</current_gom>
<pending_gom>N/A</pending_gom>
</gpu_operation_mode>
<gpu_virtualization_mode>
<virtualization_mode>None</virtualization_mode>
<host_vgpu_mode>N/A</host_vgpu_mode>
</gpu_virtualization_mode>
<ibmnpu>
<relaxed_ordering_mode>N/A</relaxed_ordering_mode>
</ibmnpu>
<pci>
<pci_bus>06</pci_bus>
<pci_device>00</pci_device>
<pci_domain>0000</pci_domain>
<pci_device_id>218710DE</pci_device_id>
<pci_bus_id>00000000:06:00.0</pci_bus_id>
<pci_sub_system_id>401B1458</pci_sub_system_id>
<pci_gpu_link_info>
<pcie_gen>
<max_link_gen>3</max_link_gen>
<current_link_gen>3</current_link_gen>
</pcie_gen>
<link_widths>
<max_link_width>16x</max_link_width>
<current_link_width>8x</current_link_width>
</link_widths>
</pci_gpu_link_info>
<pci_bridge_chip>
<bridge_chip_type>N/A</bridge_chip_type>
<bridge_chip_fw>N/A</bridge_chip_fw>
</pci_bridge_chip>
<replay_counter>0</replay_counter>
<replay_rollover_counter>0</replay_rollover_counter>
<tx_util>1000 KB/s</tx_util>
<rx_util>4000 KB/s</rx_util>
</pci>
<fan_speed>53 %</fan_speed>
<performance_state>P0</performance_state>
<clocks_throttle_reasons>
<clocks_throttle_reason_gpu_idle>Not Active</clocks_throttle_reason_gpu_idle>
<clocks_throttle_reason_applications_clocks_setting>Not Active</clocks_throttle_reason_applications_clocks_setting>
<clocks_throttle_reason_sw_power_cap>Not Active</clocks_throttle_reason_sw_power_cap>
<clocks_throttle_reason_hw_slowdown>Not Active</clocks_throttle_reason_hw_slowdown>
<clocks_throttle_reason_hw_thermal_slowdown>Not Active</clocks_throttle_reason_hw_thermal_slowdown>
<clocks_throttle_reason_hw_power_brake_slowdown>Not Active</clocks_throttle_reason_hw_power_brake_slowdown>
<clocks_throttle_reason_sync_boost>Not Active</clocks_throttle_reason_sync_boost>
<clocks_throttle_reason_sw_thermal_slowdown>Not Active</clocks_throttle_reason_sw_thermal_slowdown>
<clocks_throttle_reason_display_clocks_setting>Not Active</clocks_throttle_reason_display_clocks_setting>
</clocks_throttle_reasons>
<fb_memory_usage>
<total>3911 MiB</total>
<used>0 MiB</used>
<free>3911 MiB</free>
</fb_memory_usage>
<bar1_memory_usage>
<total>256 MiB</total>
<used>2 MiB</used>
<free>254 MiB</free>
</bar1_memory_usage>
<compute_mode>Default</compute_mode>
<utilization>
<gpu_util>0 %</gpu_util>
<memory_util>0 %</memory_util>
<encoder_util>0 %</encoder_util>
<decoder_util>0 %</decoder_util>
</utilization>
<encoder_stats>
<session_count>0</session_count>
<average_fps>0</average_fps>
<average_latency>0</average_latency>
</encoder_stats>
<fbc_stats>
<session_count>0</session_count>
<average_fps>0</average_fps>
<average_latency>0</average_latency>
</fbc_stats>
<ecc_mode>
<current_ecc>N/A</current_ecc>
<pending_ecc>N/A</pending_ecc>
</ecc_mode>
<ecc_errors>
<volatile>
<sram_correctable>N/A</sram_correctable>
<sram_uncorrectable>N/A</sram_uncorrectable>
<dram_correctable>N/A</dram_correctable>
<dram_uncorrectable>N/A</dram_uncorrectable>
</volatile>
<aggregate>
<sram_correctable>N/A</sram_correctable>
<sram_uncorrectable>N/A</sram_uncorrectable>
<dram_correctable>N/A</dram_correctable>
<dram_uncorrectable>N/A</dram_uncorrectable>
</aggregate>
</ecc_errors>
<retired_pages>
<multiple_single_bit_retirement>
<retired_count>N/A</retired_count>
<retired_pagelist>N/A</retired_pagelist>
</multiple_single_bit_retirement>
<double_bit_retirement>
<retired_count>N/A</retired_count>
<retired_pagelist>N/A</retired_pagelist>
</double_bit_retirement>
<pending_blacklist>N/A</pending_blacklist>
<pending_retirement>N/A</pending_retirement>
</retired_pages>
<temperature>
<gpu_temp>38 C</gpu_temp>
<gpu_temp_max_threshold>93 C</gpu_temp_max_threshold>
<gpu_temp_slow_threshold>90 C</gpu_temp_slow_threshold>
<gpu_temp_max_gpu_threshold>88 C</gpu_temp_max_gpu_threshold>
<memory_temp>N/A</memory_temp>
<gpu_temp_max_mem_threshold>N/A</gpu_temp_max_mem_threshold>
</temperature>
<power_readings>
<power_state>P0</power_state>
<power_management>Supported</power_management>
<power_draw>9.06 W</power_draw>
<power_limit>100.00 W</power_limit>
<default_power_limit>100.00 W</default_power_limit>
<enforced_power_limit>100.00 W</enforced_power_limit>
<min_power_limit>70.00 W</min_power_limit>
<max_power_limit>100.00 W</max_power_limit>
</power_readings>
<clocks>
<graphics_clock>1530 MHz</graphics_clock>
<sm_clock>1530 MHz</sm_clock>
<mem_clock>6000 MHz</mem_clock>
<video_clock>1410 MHz</video_clock>
</clocks>
<applications_clocks>
<graphics_clock>N/A</graphics_clock>
<mem_clock>N/A</mem_clock>
</applications_clocks>
<default_applications_clocks>
<graphics_clock>N/A</graphics_clock>
<mem_clock>N/A</mem_clock>
</default_applications_clocks>
<max_clocks>
<graphics_clock>2115 MHz</graphics_clock>
<sm_clock>2115 MHz</sm_clock>
<mem_clock>6001 MHz</mem_clock>
<video_clock>1950 MHz</video_clock>
</max_clocks>
<max_customer_boost_clocks>
<graphics_clock>N/A</graphics_clock>
</max_customer_boost_clocks>
<clock_policy>
<auto_boost>N/A</auto_boost>
<auto_boost_default>N/A</auto_boost_default>
</clock_policy>
<supported_clocks>N/A</supported_clocks>
<processes>
</processes>
<accounted_processes>
</accounted_processes>
</gpu></nvidia_smi_log>
-
hi all, ive been getting an error when i restart the docker when it does verson check, so i did a reinstall now i get this any idea how to correct?
---Version Check---
---FiveM not found, downloading!---
wget: missing URL
Usage: wget [OPTION]... ...
Try `wget --help' for more options.
tar: option requires an argument -- 'f'
Try 'tar --help' or 'tar --usage' for more information.
mv: cannot move '/serverdata/serverfiles/' to '/serverdata/fx.tar.xz-': Device or resource busy
---Prepare Server---
---Checking for old logs---
---Starting Server---
Cannot exec '/serverdata/serverfiles/run.sh': No such file or directory
[Support] ich777 - Gameserver Dockers
in Docker Containers
Posted
mind sharing ?